Used Panel Saw for sale (16,586)

Condition: good (used), Year of construction: 1986, functionality: fully functional, Technical data: Manufacturer : Striebig Type : Standard 6220A year 86 Feed : manual Saw carriage lock : manual Saw unit immersion : manual Ijdpfst D Hhajx Agzjtr Swivel adjustment 0 to 90° : manual Motor power : 4,4 Kw Cutting area : 5550 × 2200 × 80 mm Speed : 2880 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 6400×2900×1600 Condition : good Mounting : Wall mounting Price : 3990 net A forklift is available for loading The machine works well, test run of course possible.

Condition: defective spare-parts repository (used), HOLZ-HER 1230 Automatic. The machine's controller lacks the panel required for automatic formatting. Iedpeuuf Akjfx Agzstr With the help of an electrician, it can be converted to normal automatic operation. Until then, operation is not possible in either manual or automatic mode. Industrial machine in good condition, but thus it is advertised in incomplete condition.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mayer Format 4 Panel Saw Kappa 80 Automatic Year of manufacture: 11/2017 Operating hours: 425 Motor: 9 kW Pneumatic height adjustment of the pressure beam Stepless speed control of the motor Scoring unit with pneumatic lowering Angle table left 2300 x 600 mm with air cushion 2pcs extension tables 2300 mm with air cushion Isdpfx Agew Niu Uozjtr Lateral pressure device Material pusher, cutting length 3200 mm Package clamp, 6 pcs single-finger design Automatic trimming unit HW panel saw blade D 320 mm Tapered HW scoring saw blade D 150 mm Approx. dimensions 5.5 x 6 m Weight: 4200 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Itedpfxjtk It Ss Agzsr Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: as good as new (ex-display), functionality: fully functional, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, total height: 3,055 mm, total length: 6,689 mm, total width: 1,766 mm, extraction nozzle diameter: 140 mm, input voltage: 400 V, input frequency: 50 Hz, power: 5.52 kW (7.51 HP), Further technical data Vertical cutting height: 2,150 mm / 2,150 mm (with lowering function) Horizontal cutting height: 2,100 mm Width: 1,766 mm (free-standing) / 1,383 mm (wall-mounted) Cutting length: 5,300 mm / 3,000 mm / 5,000 mm (with lowering function) Saw frame Self-supporting, torsion-resistant, welded frame with latticework reinforcement on 4 solid machine feet Automatically deflecting timber support wall TRK1 with integrated small parts timber shelf Panel lowering device (PAV) with 2 panel lowering units for board materials up to max. 160 kg (80 kg per unit) Length stop profile above central support up to zero cut position Continuous length stop profile above roller support with flip stop Precise 17-fold roller support, pneumatically braked Swivelling central support along the entire length, support grid made of aluminum with plastic pads Unit for wall mounting Aluminum small parts support (1 pair), can be used individually Saw beam & saw unit Stable, durable saw beam with double locking Itsdpfx Aexazapsgzsr Robustly mounted motor carriage for high cutting precision Pneumatic clamping of the motor carriage Powerful, high-torque saw motor 5.5 kW (7.5 HP) Integrated, high-performance TRK dust extraction system for external extraction unit Supersilent sound insulation Electromagnetic motor brake Paper holder Control Clear push-button control for easy operation Positioning of the panel lowering device via two-hand control User guidance via status LED indicators on panel lowering units Operating hours counter Dimension adjustment Programmable cam switch for recurring dimensions Laser-guided display of horizontal cuts Digital measurement system DMS-Y, including motorized fine adjustment Digital measurement system DMS-X, including manual fine adjustment, installation selectable above central or roller support Optional equipment 006 Striebig free-standing base support 103 Digital measurement system DMS, X-axis 104 Digital measurement system DMS, Y-axis 105 Additional digital measurement system DMS, X-axis 200 Pro Lock Easy-Fix tool clamping system at the saw blade 201 Scoring saw unit VSA 300 Additional panel lowering unit 401 Complete aluminum small parts support Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): Iodsxhg Ibepfx Agzetr - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: excellent (used), Year of construction: 1993, Technical data: Manufacturer : Striebig Year : 9.93 Type : Standard ll Plus 5220A Feed : manual Version : automatically deflecting aluminum slatted frame Saw carriage lock : manual Immersion saw unit : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 kW Itodpjiwlz Ajfx Agzor Cutting area : 4600 × 2200× 60 mm Speed : 5250 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 5700×3000×1400 Condition : very good Location : Warehouse Saw blade : 1 pc Can be loaded on site with forklift. Delivery and assembly possible by arrangement.

Condition: good (used), Year of construction: 2019, Rear-loading panel saw with panel turntable Itsdpfx Asv Aiaaogzor

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal saw cuts: -via scale from 0 - 2,070 mm -via strip cutting stop from 75 - 500 mm Measurement readout for vertical saw cuts: -via scale from 0 - 1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Features: Itodpfx Agew I U D Eszjr -ADVANCE clamping system, consisting of 2 pneumatic clamping tongs that can be motor-driven up and down on vertical axes with a ball screw spindle. The clamps support panels up to 150 kg. -Torsion-resistant, free-standing machine frame -Round bar guides, vertical and horizontal -Pneumatically retractable slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via handwheel -Strip cutting stop -Manual programming rail with 5 T-slots -Pneumatic plunge for the saw unit -25 material support rollers -1 infeed and 1 outfeed roller -Pneumatic workpiece clamping device between support rollers -3 center support elements, pneumatically extendable -Pneumatic saw head lock -Operator panel with document holder -Control unit on saw assembly: start button, stop button -Tool cabinet -Scale illumination for vertical saw cuts Partnership Edition features: -Digital display for folding stop -Digital display for saw unit with incremental function -Pneumatically tiltable saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment, and activation indicator -5.5 kW motor including star-delta starter -Cutting line laser Availability: short-term Location: Hochheim

Condition: used, Euromac panel saw complete with unloading and loading roller conveyors, used. Ijdpfx Ajqgtbwsgzetr

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Automatic cutting height adjustment up to 118 mm The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation Isdpfxjwfdiye Agzjtr - 86: Control cabinet in special position - 700: Ardis module 1 - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Iedsxf Eg Depfx Agzjtr Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading

Condition: good (used), functionality: fully functional, saw blade bore: 30 mm, main saw diameter: 303 mm, overall weight: 800 kg, empty load weight: 800 kg, workpiece height (max.): 2,790 mm, power: 4.4 kW (5.98 HP), working height: 2,200 mm, Technical data: Manufacturer : Striebig Type : Standard 6220A Feed : manual Saw carriage lock : manual Saw unit immersion : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 Kw Cutting area : 5550 × 2200 × 80 mm Speed : 2880 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 6400×2900×1600 Condition : good Mounting : Wall mounting Price : 3990 net A forklift is available for loading The machine works well, test run of course possible. Itjdpfxet D Hcdo Agzsr

Condition: reconditioned (used), cutting dimensions 4200 mm x 2200 mm Isdpfjw Ug Aasx Agzotr Blade diameter 250 mm cutting thickness 60 mm

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: – max. cutting width: 3050 mm – min. cutting width: 450 mm – max. cutting height: 125 mm Iodpfx Agjw Nau Sjzstr – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW – two feed speeds – material hold-down – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg

Condition: used, Circular panel saw Manufacturer: Griggio Model: CA40 Itjdpfxow Nww De Agzjr Year: 2001 Country of manufacture: Italy

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, cutting length (max.): 3,200 mm, saw blade diameter: 350 mm, cutting height (max.): 105 mm, cutting width (max.): 1,300 mm, total length: 4,300 mm, overall weight: 1,300 kg, input frequency: 50 Hz, input voltage: 400 V, power: 7.35 kW (9.99 HP), rotational speed (max.): 4,000 rpm, pivoting range: 45 °, The Concept 350 combines the advantages of various saw systems: As flexible as a panel saw, the cutting quality of a pressure beam saw, and as ergonomic as a trimming saw. This is the sawing concept for modern industrial production. The machine is a leasing return. Further technical data: - Motorized rip fence with 4 aluminum stops, which move synchronously - Screen control with 8" touchscreen - Air requirement: 6 bar - Sliding table: 1,000 x 400 mm (extension table) - Outrigger table size: 3,200 mm with 2 digital stop jaws - Extraction connection: 1 x 100 mm, 1 x 120 mm - Feed speed: 0 - 40 m/min Special features: - Programmable saw blade height adjustment - Mitre fence +/- 50° - Cutting line laser - Additional support table 800 x 200 mm With the new Concept 350, you no longer need a panel saw! The workpiece rests on the machine and is positioned precisely with a pressure beam. The saw unit can be swiveled from 90° to 45°, is guided with precision, and cuts your workpiece at a constant feed speed of 0–40 m/min, ensuring the best possible cutting results. The standard crosscut fence enables quick cutting to length and efficient operation, with significantly less space required compared to any sliding table saw! Iodpfx Aswzuipsgzjtr Advantages over a sliding table panel saw: - Significantly less space required - The pressure beam secures the workpiece on the machine and guarantees optimal cutting results - The pressure beam prevents the operator from reaching into the saw blade - Ergonomic operation, as the operator no longer has to push the material through the saw blade - Time saving, as the operator does not need to guide the material during the sawing process Including delivery and installation within postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, saw blade diameter: 315 mm, space requirement length: 6,000 mm, total height: 2,600 mm, Standing panel saw Striebig, type 6220, wall-mounted, condition very good Ijdpfx Asxc Uf Rsgzstr

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed Ijdpshfufgefx Agzotr -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, functionality: fully functional, - After technical inspection - Condition: very good - Saw for longitudinal cutting, trimming, and shortening of wood or boards. TECHNICAL SPECIFICATIONS: Isdpfx Ajw Iqfxogzetr - Saw blade diameter: 400 mm - Cutting height: 80 mm - Min. cutting width between 1st and 2nd saw: 700 mm - Max. cutting width between 1st and 3rd saw: 1900 mm - Cutting width between 2nd and 3rd saw: 1200 mm - Carriage length: 1500 mm - Main motor: 2 x 4 kW - Saw blade height adjustment - Outlet diameter: 2 x 100 mm - Dimensions (L/W/H): 300 x 130 x 110 cm - Weight: ~ 700 kg

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Itedpfew I A Dyex Agzer Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Depth (mm): 1420 Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: as good as new (ex-display), functionality: fully functional, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, input voltage: 400 V, input frequency: 50 Hz, saw blade bore: 30 mm, rotational speed (max.): 4,800 rpm, overall weight: 1,200 kg, power: 5.52 kW (7.51 HP), Further technical data Cutting height vertical: 2240 mm Cutting height horizontal: 2100 mm Compressed air connection: 6-10 bar The CONTROL defines the premium class in vertical saw technology through a high degree of automation in the sawing process and innovative equipment options. The intelligent visualization on the clearly structured 12" touchscreen controller guides you safely through each step of the cutting process. With its logically structured user interface, you control the CONTROL easily and conveniently via a 12" touchscreen. Itedpfx Agjxazflezor Thanks to the standard EPS-Y, you can position the saw unit automatically for horizontal cuts. The also standard ABO ensures fully automatic upper trimming cuts. With this option, the lower trimming cuts are also performed automatically. Rotating the panel material and the associated heavy manual labor are no longer necessary. Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: good (used), Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm Isdpfxjvpf Utj Agzotr -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm Itodpfx Aob R Addsgzsr -Weight: 1220 kg

Condition: used, machine/vehicle number: 80-2-1, Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm Isdpfx Agjctvp Tezetr -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg