Used Part Washers for sale (14,008)

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hsdjvrfivjpfx Ag Iji

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with standard bottle formats Hodpfjyb Sxajx Ag Iji

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hedpfxewg E D Ij Ag Ioi

Condition: used, Year of construction: 1992, Overview The Kettner crate washer, type WAH 26, was manufactured in 1992. With an output of up to 2,600 crates per hour, it is suitable for use in existing filling lines for cleaning beverage crates. Technical details  Manufacturer: Kettner - Sotec GmbH Model: WAH 26 Year of manufacture: 1992 Capacity: 2,600 crates/h Hjdpfow N Nbusx Ag Iei

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Hodpfsu H R Nnsx Ag Ioi

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Hjdpfjtxd A Sex Ag Isi

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Hsdpfx Aju Rindjg Iei

Condition: used, Year of construction: 1999, Overview  This bottle washer was manufactured in 1999 by Italian company BODINI (model 201-10/66-11V). The machine is used for lemonade and syrup applications and has been maintained every 6 months by the owner. It remains in production until February 2026, where it can also be visited. After production stop, it will become available for removal. Technical data  Capacity: 4,500 bph Formats: 1 L 75 cl 33 cl Dimensions: 6.7 m × 2.2 m 0.5 m conveyor ≈ 2 m height Heating system: Electric heating system, 165 kW Power consumption: 160 kW with electric resistance 10 kW otherwise Air supply: 5 bar Hsdpfx Aeyb Titsg Ioi

Condition: used, Year of construction: 1997, Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction Hodpfx Asxrg H Sjg Isi

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Hedpfxol Hx Adj Ag Iei

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Hedpjt Ul Exjfx Ag Iji

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Height: 1400mm Weight: 1800kg Sieves for removal of dirt Incl. documentation Incl. spare parts list Incl. Electrical diagram Hsdpfx Asvm D Umog Iei

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Hjdsl Hx Enjpfx Ag Iji

Condition: used, Year of construction: 2020, Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  Capacity: 12 kegs/hour Cleaning stations: 2 Heating: Steam Formats: S-type kegs Hedpfsxcul Dex Ag Iji

Condition: good (used), Year of construction: 2001, functionality: fully functional, MA HKA hand-held edge banding machine in fully functional condition. Edge banding machine for shaped parts Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Panel thickness: 16 - 45 mm Strip feed: 20 - 50 mm Power consumption: 2.6 kW Minimum external radius: Depends on the flexibility of the edge material Hodpex H Un Aefx Ag Iji Minimum internal radius: 150 mm, depending on the material properties With support arm and spring balancer Vacuum clamping table with 4 switchable zones Rollers, vacuum pads (additional new rubber sets) for the vacuum table

Condition: new, Thermo Scientific Wellwash Microplate Washer Description Reliably wash 96-well plates with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer features a graphical user interface, multiple language options, and a USB port for optimal ease of use and convenience. Features: Large, clear color display and keypad ensure ease of use. The user interface is logically and intuitively structured, allowing for rapid protocol programming. User-friendly software requires minimal training and ensures a quick start. Pressure-free bottles are safe to use. Liquid level sensors in the wash and waste bottles ensure safe runs. Automatic pre-rinse function ensures safe performance. Aerosol cover prevents the escape of aerosols of infectious material. Plate sensor detects whether a plate is present. Wellwash effectively removes excess liquid from wells. Low residual volumes ensure optimal wash performance and reliable assay results. Financing through our bank is also possible. komplett-konzept.leasingo.de Hedpfx Aetzb D Djg Ioi More items in other sizes—new and used—can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Maintenance and inspection hatches for wash and rinse tanks Hjdpfx Agsx Exuqs Iji Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system Hedpfodnfdljx Ag Iji External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. System components: SCARA robot Camera-based part detection (vision system) Hjdpfx Aow Rm Hwog Iji Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Typical applications: Automatic assembly Sorting and transferring of small parts Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: new, Hydraulic cylinder exchange cylinder Hjdpfjd Hgadjx Ag Iji Chamber filter press As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.

Condition: new, Membrane for REWA ABEL piston diaphragm pumps. Diaphragm pumps separate difficult media from the driving pump mechanism. An advantage of the piston diaphragm pump is that the fluid and hydraulic fluid are completely separated and do not come into contact with each other. We supply you with diaphragms (Abel spare parts) for all Abel / REWA pumps in known production quality with an above-average service life. Ask us Hsdsd Hghkepfx Ag Iei

Condition: new, Hydraulic cylinder Cilinder stand exchange cylinder Chamber filter press As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats. Hjdpfx Ajd Hgahjg Ioi

Condition: good (used), Year of construction: 2013, Low carbon steel shot LC S-110, size: 0.3 mm Min. workpiece size: 50x80 mm Max. workpiece size: 600x400 mm Number of spray nozzles: 4 pcs Spray wheel diameter: 380 mm Grain flow rate: 60-120 kg/min/nozzle Spray material loading: 1500 kg Hjdpfx Agoyhbkfe Iei Spray material to be used max. HRC 51 Grain size 0.2–1.4 mm, max. carbon content 0.7%

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: VM40027E, Selling for spare parts 2 CNC milling machines Hitachi Seiki VM40II and VM50. Hjdpfxjd Tf Nps Ag Isi

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete plant, Centrifuge E 700 H/1, Drum dimensions 690/720/600 mm, Drum capacity 120 L, Speed 735 rpm, Wall thickness 12 mm, Material GS 45, Max. loading 300 kg, Charges per hour: 10, Heating power 8 kW, Operating voltage 380 V, Total connected load 35 A, Lifting device for loading, Vibratory chute for chips and parts, 3 separator drums with different hole patterns. Chip conveyor belt to scrap container. The unit can still be demonstrated under power. Ex production site: Dismantling and loading not included in the price. Assistance and forklift are available. The dismantled components weigh a maximum of 2 tons. Hjdpfxew Evy Rj Ag Isi