Used Patel Automation for sale (11,128)

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Njdjxuh Ddspfx Agzsdf

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. Njdpfoxtwmrjx Agzodf 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 2011, Haas VF 3 optionally with automation, Year of manufacture 2011 / Automation 2005, Ndodpfx Agsxltfuszof Haas control, Travel X/Y/Z 1016/508/635 mm, 40-position tool changer, BT 40 spindle taper, Spindle speed up to 10,000 rpm, Tool measurement, 3D probe, Automation interface, Automatic door, Oil mist extraction, Internal coolant supply, OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, Year 2005, 1 magazine – 20 pallets, 20 pallets System 3R GPS 240, Clamping plate 20 – M 10, Modular vise/clamping block, fixed block unit, Setup station, Zero-point clamping system 3R GPS 240,

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Nsdpfx Aou H R Iwogzodf Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Nsdpfx Agog D Uuqezedf Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: good (used), Year of construction: 2024, Automation for HOMAG Drillteq V-310 - immediately available Ndodpfx Asxl Ertogzof - 2024 For sale: automation, return system for workpieces.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system Njdpjxlchfjfx Agzsdf C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Ndsdpfovzr Nbjx Agzjf Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: good (used), Year of construction: 2001, Hermle C 800 U optionally with automation, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 800/600/500 mm, 2-axis NC swiveling rotary table Spreitzer 3-way, tool magazine with 87 stations, HSK 63 interface, laser tool breakage detection, 3D touch probe Renishaw, interface for automation, automatic door, oil mist extraction. OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, year of manufacture 2014, magazine with 60 pallets, 23 pallets, zero-point clamping system 3R Macro, System 3R Macro with 40 centric clamps Spreitzer MZQ 110 - 60 PA. Nsdpfoxlq T Ajx Agzedf

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Ndodsharwyepfx Agzsf Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm Nodpow I U Ecjfx Agzedf from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: new, Fully automated system Energy saving Industry 4.0 Durma Cloud Fiber Laser Technology Environmental awareness Synchronous minimum working range High precise repeatability High process accuracy Compact layout Ndjdpfeg Adn Isx Agzof Low noise level Simple and fast installation On request we will send you information material

Condition: excellent (used), Year of construction: 2006, Opportunity to purchase this outstanding 5-axis HERMLE C30U including RS automation, an additional tool magazine ZM157 and multiple pallets. Available for immediate delivery and can be inspected in operation upon appointment. More information on request. Control HEIDENHAIN iTNC 530 X-axis travel 650 mm Y-axis travel 600 mm Z-axis travel 500 mm Spindle speed range 18000 rpm 1/MIN Spindle hours 54225h Tool taper SK 40 Tool Magazine Additional magazine ZM157 (157 positions) Nc swivel rotary table diameter 280 mm Features: Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided Oil Mist Extraction: Provided Chip Trolley: 450 liters Rotating Transparent Window: Available Nodpfx Aexbr Rhogzodf Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Table axis: a-axis off-center Table specification: 6-way rotary feed through Internal coolant supply: 80 Filter: paper belt filter Conveyor: scraper belt conveyor Automatic cabin door: yes Polycarbonate safety glass: windows Frequency: 50 hz Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2006, AMADA AUTOMATION LKI MP 300 Auto Sheet Loader YEAR 2006 SERIAL NUMBER 1119 Max Sheet Size … 3000mm x 1500mm Min Sheet Size … 1000mm x 300mm Sheet Thickness Range … 0.5mm – 6.0mm Maximum Lifting Capacity … 170Kg Cycle Time … 32sec Njdpfxjwdg I No Agzodf No. Of Raw Material Pallets … 2 off Max Load Per Raw Material Pallet … 3000Kg Maximum Stack Height … 300mm Separation Magnets/Pallet … 3 off Pallet Exchange Time … 25sec Sheet Separation … Sheet Peel and Airblow Double Sheet Detector … Yes Stacking Table Load Capacity … 3000Kg Stacking Table Max Stack Height … 400mm Power … 10KVA Air Pressure … 6 Bar Air Flow Rate … 650l/min

Condition: good (used), Year of construction: 2007, Chiron Mill 800 5 Axis with Automation, Year of manufacture 2007, Siemens 840 D control, Travel X/Y/Z 800/550/550 mm, 2 axes NC swivel/rotary table, 65-position tool changer, HSK 63 spindle interface, Spindle speed up to 12,000 rpm, Chip conveyor, Internal coolant supply, Paper band filter, Tool laser measurement, 3D measuring probe, Interface for automation, Automatic door, Oil mist extraction, AUTOMATION OPTIONAL Automation System 3 R / SWE, Year 2008, Zero-point clamping system 3 R GPS 240, 12 pallets System 3 R GPS 240, 6 mechanical centric vices Spreitzer MZS 260 - 125 A, 12 pallets System 3 R GPS 240, Ndjdoxlq E Sepfx Agzsf 6 mechanical centric vices MZU 170 - 60,

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Automation system of the Wittmann brand was newly installed in 2016 and used on a Netstal Synergy 2000. Ndedpfx Agspm Htgozjf All documents, operating instructions, maintenance plans, measurement diagrams etc. included as well as control modules, power supply units and control panels. The Wittmann Picker can be used as a stand alone. TECHNICAL DETAILS travel X / Y / Z: 900 / 1800 / 3000 mm payload: 15 kg Scope of delivery: robot, console, support V/2614-3104, adapter, conveyor system standard MB belt, SE protective enclosure incl. safety door with SIPA MACHINE DETAILS dimensions plant (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE mains voltage: 400 V tolerated voltage fluctuations: up to 10% connected load: 11 kVA frequency: 50-60 Hz tolerated frequency fluctuations: up to 2% supply line fuse: 16 A air pressure: max 6 bar maintenance of system functions: up to min 5 bar

Condition: new, Siemens SPPA - T2000 Automation Cabinet Ndedpfx Ajtzbdkegzsf Control System and Cabinet Design SPPA - T2000 AS 620B R903 Siemens 8 MF Cabinet SPPA FUM R Standard Cabinet 6DP2623-1GG10-0XX0-Z Siemens SPPA - T2000 8 MF Cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross bracing Seismic reinforcement kit front and rear Double doors 2 partition walls Lifting eyes Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Degree of protection IEC 60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm) No water protection Central unit subrack: 1 x red. AP FUM-B-BGT: 3 x EU 903 subrack with 2 x IM616 Profibus connection and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 Module designation Fum210/6DP1210-8BC Teleperm XP binary module Profibus connection interface module IM616 6DP1616-8BA Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1999, Control panel Rema Sawco Sawmill Nsdpfxer Avpis Agzedf

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, TECHNICAL DETAILS Year of manufacture: 2019 Rated voltage: 400 V / AC Rated current: 17 A Protection: 20 A Power: 8.5 kW Frequency: 50 Hz Number of phases: 3/N/PE Control voltage: 24 V / DC Power supply cable cross-section: 5 × 4 mm² Power connection: Fixed connection IP code: IP 40 TEMPERATURE RANGES Transport: 0 °C to +60 °C Operation: +10 °C to +40 °C Storage: +10 °C to +40 °C COMPRESSED AIR CONNECTION Operating pressure: 6 bar Connection: Plug-in coupling NW 10 Air consumption: approx. 15 l/min MACHINE DIMENSIONS Depth: approx. 1,010 mm Width: approx. 1,450 mm Height: approx. 2,400 mm TRANSPORT WEIGHT Total: approx. 1,100 kg CONTROL TECHNOLOGY Type: CP2607-0000 Panel PC OPERATING MEDIA Permissible: Water-based cleaners Not permissible: Hydrocarbon cleaners TANK CAPACITY Njdpew T Tidsfx Agzedf Approx.: 550 liters

Condition: excellent (used), Year of construction: 2007, Amada AC 2510 NT CNC Turret Punch Year 2007 200kN force, 51 tool stations LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity. With tooling Scrap conveyors With Sick MSLE03 safety light curtain approx. total weight 19000kg including tooling and sheet loader Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) Press Type AC Servo Drive Axis Traverse Distance 1270 x 2500mm Workable Maximum Sheet Size 1270mm x 5000mm (with auto repositioning) Fully serviced with Amada uk. Max. Material Thickness 6.4mm mild steel Max. Hole Diameter 88.9 mm Max. Material Weight 150 kg No. of Stations Ndsdpfx Agswc R Ecezef 24 A up to 12.7 mm 18 B up to 31.7 mm 3 C up to 50.8 mm 2 D up to 88.9 mm 3 AI up to 31.7 mm 1 AI up to 50.8 mm Axis Speed (X, Y) 100 m/min Hits Per Minute Turret Speed Bi-Directional 30 R.P.M Punching Accuracy 0.1 mm (incl 1 respostion) Ram Stroke Length 41 Tool Lubrication Axis Drives Electric Power Required 19 KVA Air Pressure Required 5.0 Kgf/cm2 Air Flow 500 l/min Machine Length 4165 mm Machine Width 5120 mm Machine Height 2082 mm Machine Weight 13000 kg AMNC-F windows based network control 15″ Colour LCD touch screen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 90,899 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, cutting speed: 60,000 mm/min, Automatic loading and unloading system Finn Power LU3000 included in the sale! TECHNICAL DETAILS Sheet size: 1,500 x 3,000 mm Maximum cutting capacity (steel): 20 mm Maximum cutting capacity (stainless steel): 10 mm Maximum cutting capacity (aluminum): 8 mm Laser power: 4,000 W Cutting Capability Positioning speed: 300 m/min Acceleration: > 2 g Cutting speed: up to max. 60 m/min Precision Ndsdpfjwydh Esx Agzef Position deviation for drilling (XY axes): max. 0.1 mm Profile deviation: max. 0.05 mm Angular deviation: 0.03° Control system: Siemens 840D Loading and unloading unit Maximum material weight for loading: 1,000 kg MACHINE DETAILS Operating hours Total operating hours: 90,899 h EQUIPMENT Full service history by Primapower All service records and user manuals available Cooling unit included Vacuum unit included Primapower offers dismantling and loading for €7,500.

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm Ndsdpfxen Arnxj Agzof distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Condition: good (used), Year of construction: 2000, FANUC LR Mate 200i automation robot + R-J2+ handheld controller The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a variety of manufacturing and system processes. The tabletop design of the LR Mate 200 allows it to be used in a variety of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for power-up calibration. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i has a wrist-integrated end effector connector, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Ndodpowbqvfjfx Agzsf Areas of application: Assembly, material handling, material removal, parts transfer Robot specifications Axes:6 Payload:3.00 kg H-reach:700.00mm Repeatability:± 0.0400 mm Robot mass:39.00kg Structure:Articulated Year built 2000 Robot movement speed J1180 ° / s (3.14 rad / s) J2180 ° / s (3.14 rad / s) J3225 ° / s (3.93 rad / s) J4400 ° / s (6.98 rad / s) J5330 ° / s (5.76 rad / s) J6480 ° / s (8.38 rad / s) Robot movement range J1± 160 ° J2+ 150 ° - 35 ° J3+ 165 ° - 150 ° J4± 190 ° J5± 120 ° J6± 360 ° Item condition: used More items - new and used - can be found in our store! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,150 h, functionality: fully functional, machine/vehicle number: 30017409, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, workpiece weight (max.): 600 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous milling machine with 60 mm long workpiece feeder Hedelius RS80 S including long tower Program run time 25,130. Still in operation Spindle: 300 hours Speed: 30-8,000 rpm Power (approx.): 25 kW Torque (approx.): 244 Nm Internal coolant supply 25-70 bar Tool holder: SK 40 DIN 69871 AD Ndjdpfx Aewl Dy Ejgzsf Tool magazine: 30 + 190 additional stations Encapsulated Heidenhain linear measuring system: Direct in X/Y/Z/A/C Travel: XYZ 800 800 600 Rapid traverse in X/Y/Z: 40 m/min NC swivel rotary table: A-axis: +95° / -95° C-axis: 360° Clamping surface: ø800 x 630 mm Table load (max.): 600 kg Equipment/Accessories: Chip conveyor Inclined bed coolant system SKM 1250 L High-pressure coolant pump IKZ 70 bar Flushing guns Hydraulic clamping and unclamping on the table via M command (2 pieces) Workpiece measuring probe: Infrared M&H probe Blum laser tool control and a measuring system for diameter and length Fully enclosed work area hood with blinds 2 electrostatic air filters LTA type AC 1000 Interior flushing Automatic door interface Automation Setup mode: Electronic handwheel Heidenhain 410 Lang Eco Tower 60 including 50 77 mm clamps Can be viewed under current

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Nsdpfxjwgbw Ro Agzedf Possible to offer with additional Weinig bundling system if needed.