Used Pelletizing Plant for sale (3,428)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. Dodpfx Akoz Nxk Nj Askw The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Dksdoz Hvmhopfx Ak Aew Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Dsdpfoz Hw Umsx Ak Aekw Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, Concrete mixing plant, Sipe TTM 800 Year of manufacture: 2008 Mixer: 800 liters / approx. 14 cubic meters per hour Cement silo: 40 tons Scraper with chain for 2 types of gravel Dkedpfez Ikxhsx Ak Aew Control system: fully automatic with concrete control

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! Dksdpfozx S E Hox Ak Ajw EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, Dkjdpfx Akovg A Raj Aew total weight: approx. 570 t per unit

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, We are offering two new Totem 20 combined heat and power (CHP) units, as well as a new Totem 10 CHP unit, manufactured in 2016. These CHP units are from a warehouse clearance. According to the previous owner, the units are eligible for CHP subsidies, as they have never been installed. However, this must be verified independently. The TOTEM 20 generates a maximum of 20 kW of electricity and 48.5 kW of heat. The TOTEM 10 generates a maximum of 10 kW of electricity and 25.2 kW of heat. Please refer to the uploaded data sheet and operating manual for all other technical specifications. Depending on the location, the CHP units can also be delivered to Germany or Austria. The price for the Totem 10 is €6,000. The price for the Totem 20 is €7,000. Dsdpfx Aeytympjk Ajkw The current list price for a new Totem 20 is approximately €57,000 gross, and they are being sold for around €45,000 (see photo). If you have any questions or require further information, please send us a message or call us. We offer a start-up guarantee in the form of a return policy in case of any issues, but we will not cover any costs incurred.

Condition: new, Year of construction: 2026, We offer this new Hydro-Thermal Treatment Plant type IWT Moldrup-SPP Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to Ø2,600 mm diameter and 16,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 16,000 mm Dkedpfx Aksymxqao Ajw Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 16,000 mm stainless steel autoclave, handling approximately up to 30 m³ of timber per charge, with operating pressure up to 12 bar (abs) one charge is up to 24 hours. Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. This is an offer for a newly manufactured plant. The equipment shown or described is not an existing plant available for immediate delivery. Final technical specifications, scope of supply, price and delivery time will be confirmed in our quotation. We also offer other diameters and lengths upon request. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Kahl - Wood Pellet cooler Dkjdpfx Akjv R Tdfs Aew 3-5 tons per hour

Condition: used, Year of construction: 2016, 2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment. Dsdpfx Aez Ibx Sek Aokw

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, mesh extension Equipment: - Spare wheel - Robust steel tub - Highly adaptable Net price: €8,873.95 / Gross price: €10,560.00 Article number: GP2335401802.51 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration Dkjdpfxsz Ri A Eo Ak Asw • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 400 x 180 x 96 cm • External dimensions (LxWxH): 569 x 240 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,025 kg • Payload: 2,475 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal all-purpose construction machinery trailer - Unique on the market • Every available option can be flexibly added or removed, enabling customized adaptation for virtually any application • Attachment option on all 4 corners for sideboards, tarpaulin frames, sideboard extensions, or front wall extensions • Steel sideboard extension - 50% mesh extension + 50% closed sideboard, can be removed without tools • Incl. recessed eccentric locks • Durable rubber strip seals the extension to the sideboard at the bottom • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, extensions, etc. can be retrofitted at any time • Robust steel mudguards with non-slip perforated profile • Reinforced screen-printed wood floor 18mm, non-slip and waterproof • Very stable steel frame welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal beam under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Very low chassis for a shallow approach angle • Lashing points at the bottom and top of the sideboard (1000dAN/kg), TÜV certified • Side panel color: black • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the sideboard • Reverse automatic • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pole plug • Complete LED lighting: Extremely bright, durable, and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty

Condition: new, Year of construction: 2025, machine/vehicle number: 526969342, Gasparin Jaw Crusher GI129CV Everest Mobile jaw crusher on a crawler track 55-ton machine with an extremely robust crusher and exceptionally high potential. It is characterized by its robust construction in all its components and is undoubtedly the best solution for the most demanding applications. Equipped with a grizzly vibrating feeder (GI129C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI129CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment featuring the patented HCS system (Hydraulic Crushing System), the EVEREST is the best solution for the requirements in a quarry. Djdshd I Siopfx Ak Aekw Production capacity: approx. 430 tons/hour Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Gap setting hydraulically adjustable, even during the crushing process. Fast locking system with wedges and pivoting cylinders Dust extraction Tank pump Magnetic separator Warranty: 1 year, up to a maximum number of operating hours from the start of operation of the plant. Technical data: Jaw crusher 1150 x 850 mm Crushing gap from 75 to 200 mm Hopper 7 m³ - 2850 x 4960 mm Two-deck vibrating screen 1170 x 2000 mm Main conveyor belt 1100 x 10000 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Crawler track 500 x 3900 mm Weight: kg Transport length 12950 mm Transport width: 3000 mm Transport height 3400 mm Further information Intended use: Construction, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 923912978,

Condition: new, Year of construction: 2025, machine/vehicle number: 341889991, Additional options and accessories Control system, control room Notes Frumecar ECA Mix 1000 fully mobile concrete batching plant * Capacity: 50 m³/h * The plant does not require any foundation and can be assembled in 1 day * Please request a specific offer and technical details More machines and mixing plants can be found on our website Further information Dodshd I Ulepfx Ak Aokw Intended use: construction industry, applicable material: concrete, overall condition: very good, technical condition: very good, visual condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 145568556, Gasparin Jaw Crusher GI129C Everest Mobile jaw crusher on a tracked undercarriage 55-ton machine with an extremely robust crusher and exceptionally high potential. It is characterized by its robust construction in all its parts and is undoubtedly the best solution for the most demanding applications. Equipped with a grizzly vibrating feeder (GI129C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI129CV) is suitable for challenging applications with high fines content and high material moisture. With the standard equipment featuring the patented HCS system (Hydraulic Crushing System), the EVEREST is the best solution for the requirements in a quarry. Production capacity: approx. 400 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and pivoting cylinders Dust extraction Tank pump Magnetic separator Warranty 1 year or up to a maximum number of operating hours from the start of operation of the system Technical data: Jaw crusher 1150 x 850 mm Crushing gap from 75 to 200 mm Hopper 7 m³ - 2850 x 4960 mm Grizzly feeder 1120 x 4250 mm Main conveyor belt 1100 x 10000 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Dedpfxohd Na He Ak Ajkw Control panel Tracked undercarriage 500 x 3900 mm Weight: kg Transport length 12950 mm Transport width: 3000 mm Transport height 3400 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: good (used), HK Refrigeration Refrigeration plant Dkedpfx Aoqqix Uek Aew consist of twin fan evaporator and Copeland compressor

Condition: new, Year of construction: 2023, We offer this new pellet press, manufactured in 2023. Manufacturer: Artmash (Ukraine) Year of manufacture: 2023 Production capacity: 700-900 kg/hour Die: 6mm Condition: new (10 tons produced for testing) Spare parts included: 2 dies and rollers Dkodpfjzh Hd Nox Ak Ajw Category ID: 917 Type ID: 2701 Type: pellet press If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Dkedpfxszv Hzwj Ak Asw

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) Dsdpjz A Sxljfx Ak Aekw with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: good (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, Rühle Tumbler MKR 130 Djdpfx Aoz D Dryek Askw 380V With vacuum and cooling.

Condition: like new (used), Year of construction: 2025, operating hours: 1,500 h, functionality: fully functional, pressure: 12 bar, total height: 2,896 mm, total length: 12,192 mm, total width: 2,438 mm, empty load weight: 14,000 kg, Mobile containerized steam boiler plant 2,000 kg/h • Configuration: Mobile containerized steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: Steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2″, including gas filter, pressure regulator, operating and safety valves, and valve tightness monitoring. Djdpfxez Ix Svj Ak Aokw • Controls and automation: Valiantec, equipment for 72-hour operation without continuous operator attendance, modulating water-level control, Gestra TDS/BAE automatic TDS blowdown, and Crotti pneumatic bottom blowdown. • Feedwater pumps: 2 × Grundfos CR3-27. • Feedwater tank / atmospheric deaerator: DGSA 1500 FS, capacity 1,500 liters, AISI304 stainless steel, with steam heating and temperature control; specified water temperature 85–95°C. • Water treatment: A water softening system is not included in the scope of supply but can be supplied and installed at the buyer’s request, subject to separate agreement. • Blowdown cooling system: 250-liter AISI304 blowdown vessel with automatic cooling control. • Pipework and fittings: thermally insulated pipework, isolation and non-return valves, and steam traps. • Flue: insulated DN450 stainless-steel flue system. • Safety equipment: water-level and pressure safety devices, two safety valves, LPG and smoke detection, alarms, emergency shutdown, automatic gas shut-off, and ventilation. • Container footprint: 12,192 × 2,438 mm – length × width. • Connections: DN80 steam outlet, DN65 gas inlet, 1″ water inlet, DN80 blowdown vessel drain.

Condition: used, machine/vehicle number: LC656, Used PIERALISI oil extraction plant with decanter J2Technical Specifications & Performance DataThis complete olive oil extraction line centers on a Pieralisi J2 decanter and includes upstream preparation and downstream separation for continuous processing. The configuration is engineered for farms, cooperatives, and industrial facilities seeking reliable second hand equipment to integrate upstream of bottling and industrial packaging operations. Manufactured by Pieralisi with complementary stainless steel equipment, the line supports robust operation for edible oil production.Main decanter: Pieralisi J2 decanter centrifugeHourly throughput (decanter): 25–30 ql/hSeparators: 2 centrifugal separatorsMalaxers: 3 malaxers, type SiciliaPreparatory malaxer: 1 unit, capacity 5 qlCrusher: Hammer crusherWasher: Santoro washer in stainless steelDefoliator: Leaf-removal infeed conveyorConstruction: Food-grade stainless steel on washer and process-contact equipment as specifiedAdvanced Automation & Control SystemsThe line is designed for continuous, stable operation with straightforward operator interfaces suitable for food processing environments. Mechanical and process controls support steady feed, uniform malaxing, and consistent separation parameters around the Pieralisi J2 decanter. Safety guarding and emergency stop functions are standard practice for operators working around the crusher, conveyors, and rotating equipment.Production Line Integration CapabilitiesThis extraction line integrates seamlessly upstream of edible oil bottling equipment such as filling, capping, and labeling machines. It can be aligned with existing conveyors and storage tanks, enabling a complete processing-to-packaging workflow for food and beverage production environments. Format flexibility stems from process tuning (crushing, malaxing times/temperatures, and separation) to match different olive varieties and quality targets before transfer to bottling lines.Machine type/categoryManufacturer/ModelYearVarious Equipment — Defoliator Conveyor—Various Equipment — WasherSantoroVarious Equipment — CrusherHammer crusherVarious Equipment — MalaxerPreparatory malaxer, 5 qlVarious Equipment — Malaxer3 units, type Sicilia Dedpfx Akez E Dine Ajkw

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. Dksdpoz I Tzxsfx Ak Aew The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 26, Automatic bagging machine LAMAR SL-200 – 2015 For sale: an automatic bagging machine / packaging machine, model SL-200, manufactured by the Polish company LAMAR in 2015. The machine is designed for packaging bulk products, including pellets, fertilizers, animal feed, soil, and salt. Key parameters: Packaging capacity for pellets: approx. 5 tons/hour. Adjustable product weight per bag: 5–25 kg. Bag length adjustment: lengthening and shortening from the operator panel. Film tube: 940 mm. Technical specifications and equipment: 3-lane weighing dispenser, bag forming unit for 15 kg bags and other formats within the specified adjustment range, gusset forming unit, film sealing unit, servo motor for positioning the horizontal jaws, unit for measuring bag length on film without printing, Djdpfo Aa Duyex Ak Ajkw roller perforating unit, technological platform, control cabinet, feed hopper. The machine is in very good technical condition. A video of the machine in operation can be provided. Please contact us for further information.

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1011/33, High-quality pharmaceutical laboratory centrifuge HEINKEL V 500 TP – Complete system including control system and accessories NEW PRICE: €330,000 For sale is a professional, vertical pilot plant centrifuge of the type HEINKEL V 500 TP in excellent, like-new condition. The system is specifically designed for feasibility studies, product development, and small-scale production in the pharmaceutical and fine chemical industries and meets the highest cGMP standards. This is a complete system ready for immediate use, including the original control cabinet and the integrated operating unit (HMI). Thanks to the mobile stainless steel frame (“Plug and Use”), the system can be moved flexibly within the room or integrated into existing processes. Technical data & highlights: Manufacturer: HEINKEL Drying and Separation Group Model: V 500 TP (Vertical Centrifuge) Year of manufacture: 2021 / 2022 Drum diameter: 500 mm Nominal volume / filling weight: 30 liters / approx. 36–38 kg Material: High-quality stainless steel (product-contact parts with high surface quality, Ra < 0.8 µm) [If applicable, add "Alloy C22 / Hastelloy" here] Approval: CE marking available Documentation: Complete technical documentation Scope of delivery: HEINKEL V 500 TP centrifuge on a mobile stainless steel frame Original, free-standing control cabinet (including cooling unit) Integrated control panel (touch-HMI) directly on the machine Dksdpfxsz Euz Io Ak Ajw Original HEINKEL accessories and tool case