Used Pet Preform Machine for sale (64,997)

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min Credpfxezaf Huo Aktsi NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U | C40U | C-40U | C-40 U

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm travel -z axis 520 mm Csdpfj Ah T U Tox Aktsri numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement Csdps Ah Uabofx Aktsri The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: used, Year of construction: 1970, Tool milling machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, including geometry report Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Csdpfx Aez A Tn Isktsri Travel ranges X/Y/Z 300 / 150 / 340 mm Spindle stroke 60 mm vertical Tool holder MK 4 Speed range 40 to 2,000 1/min Two-stage motor, gear stages Speed steps 16 speeds Feed 16 steps 10 to 500 mm/min Drive power Two-stage motor approx. 1.0 / 1.4 kW Operating voltage 380 V / 50 Hz Total connected load approx. 1.9 kW Clamping surface 600 x 210 mm Max. table load approx. 150 kg Space requirement (W x H x D) approx. 1,100 x 1,000 x 1,500 mm Weight approx. 750 kg Equipment including: - Vertical milling head - Heidenhain 3-axis digital display - Automatic feed - Coolant system with overhauled pump - Equipment scope as shown in the picture Inquiry item: Transportation costs in an individual offer

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 50 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, EXHIBITION MACHINE We are offering a high-precision laser cutting machine with 3000 watts of laser power. Type: LG-1313/3kW HaiCut Premium Line - Maximum configuration - Innovative 3-gas switching system (Pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory material - Machine bed and axes measured and adjusted with Renishaw interferometer Our goal is to offer the best, most stable, and most affordable laser machines currently available on the market. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is also included in the scope of delivery, as is first-class on-site service. Please also note our attractive leasing/hire-purchase offers. New machine, We would be happy to demonstrate the machine to you at our facility. Travel range: approx. 1300 x 1300 mm Table area: approx. 2500 x 1300 mm (i.e. there is space in the machine for a medium-sized sheet) Extendable cutting table For highly precise cutting of metal Everything is pre-installed and adjusted Cutting software in German Incl. box module Very easy to operate Switch on and get started Laser source from Max Photonics (G5/CE version) with 3000 watts of power Extensive electronic and mechanical collision protection measures for the cutting head Large laser protection window on the front door Automatic front door Safety light curtain for maximum operator protection Cutting of stainless steel up to 12mm Cutting of steel up to 22mm Cutting of aluminum up to 12mm Cutting of brass up to 5mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200mm flue connection for fume extraction Incl. extraction fan The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Raw material detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import from SolidWorks, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Leasing or hire-purchase is possible through our financing partner. Do you need a different power or table size? - No problem, we have several machines in stock or available on short notice. Crodji Igauspfx Aktsi Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland. Machine dimensions approx.: Width: 3.5m, Height: 2.1m, Depth: 3.5m Total weight: approx. 3.5 tons

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Equipment: auto duplex, brochure finisher, Konica Minolta Accurio Press C 14000, manufactured in 2022, in very good condition, tested and ready to print! Equipment: FS 532 RU 518 m IQ 501 + Video interface VI514 PF 713 PF 811 LS 507 FIERY IC318 NEW ARRIVAL – KONICA MINOLTA ACCURIOPRESS C14000 We are pleased to offer an exceptionally well-equipped Konica Minolta AccurioPress C14000, featuring a powerful Fiery IC-318 print controller and an outstanding range of professional options. This high-end production press offers: • Two high-capacity paper feeders, including one supporting banner printing up to 900 mm. • Paper handling capabilities up to 450 gsm. • An integrated document scanner for convenient scanning and copying operations. • IQ-501 intelligent quality control system for automatic colour calibration, colour consistency and precise front-to-back registration. • A copy count representing less than 20% of the machine's expected lifetime. • LS-507 high-capacity stacker for efficient handling of large print volumes. EXCLUSIVE PROVENANCE AND MAINTENANCE HISTORY This machine comes directly from the French Government and has been maintained exclusively by Konica Minolta France. All the latest available technical upgrades have been carried out, bringing this C14000 up to the same technical specifications and performance level as the newer C14000S. OPTIONAL FINISHING AND AUTOMATION UPGRADES This exceptional production press can be further customized to meet your specific printing and finishing requirements. The following additional options can be supplied upon request: • LS-507 High-Capacity Stacker: An additional stacking unit can be supplied if required, providing increased output capacity for long production runs. • FD-503 Multi-Folding Unit: Professional folding and punching capabilities, including Z-folding, letter folding and two- or four-hole punching. • SD-506 Saddle Stitcher: Professional booklet production with automatic folding, saddle stitching and fore-edge trimming. • AIT – Automatic Inspection Technology for IQ-501: An advanced automated print inspection system that detects image defects during production, helping to identify defective sheets and maintain consistent print quality. Requires the appropriate inspection modules and interfaces. • Automatic Ring Binding System: A professional ring-binding solution can also be supplied upon request, allowing the production of professionally bound documents. Other compatible professional finishing solutions can also be added according to your production requirements. Codpfx Ake Ah Tf Eeteri A RARE OPPORTUNITY! As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions, don't hesitate to ask me. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries on request. Please do not hesitate to contact us for further information.

Condition: used, Year of construction: 2002, travel distance X-axis: 7,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, Travelling column milling machine Manufacturer: ANAYAK Type: HVM 8000 Year of manufacture: 2002 Control: Heidenhain Technical details: X-travel: 7,300 mm Y-travel: 1,500 mm Codpfxjz Ic Alj Aktori Z-travel: 2,000 mm Spindle speed: 4,000 rpm Tool taper: SK 50 Number of tool stations: 40 positions Condition: Used Available: from March 2027 The machine is under power and can be demonstrated. Technical features & accessories: - Control cabinet newly rewired - Orthogonal indexing milling head, 1° + 2.5° - Chip conveyor - Coolant system - Floor plates Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2026, Laser source: Raycus 3 to 6 kW Laser head: 3D laser head for bevel cuts Structure: 2 horizontal chucks Loading: 6 m unloading 4 m Cedenkailepfx Aktjri Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-160 mm Tube profiles: round, rectangular, square Options: - Air compressor - Extraction system

Condition: used, Year of construction: 1998, type of input current: three-phase, pressure: 7 bar, input voltage: 400 V, power: 6 kW (8.16 HP), No. 3290 4-head welding machine Urban AKS 1400/ETS Used, year of construction 1998 According to our customer / the previous owner, the machine is fully functional and can be inspected on site Vertical 4-head welding machine for PVC window profiles, welding all 4 corners at 90° in one operation Fully automatic cycle with automatic outfeed of the welded frame onto a conveyor Vertical/horizontal tilting unit, can be linked to a corner cleaning machine with turning station Electronic positioning of the X, Y1 and Y2 axes by servo motors (Lenze servo inverters) Urban IPC control with B&R Provit 2500 operator panel Extended working range, welding dimensions max. approx. 3850 x 2220 mm, min. approx. 355 x 320 mm Profile height 50 - 100 mm (clamping height SH 100) Profile width max. 130 mm, 150 mm on table side Weld bead limitation 2 mm Heating plates 200 x 295 x 15 mm with Teflon holder, temperature controller for each heating plate Adjusting plate 190 mm, welding stop 24.0 mm, loading stop 17.8 mm, left-hand stop Power supply 230/400 V / 50 Hz, rated power 6 kW Compressed air 7 bar Profile supports for SL 70 (outer frame, sash) and SL 82 (outer frame, sash, entrance door sash) Various spare parts (Lenze controller, brake, temperature controller) Transport dimensions approx. 5400 x 2400 x 3100 mm LWH Weight approx. 2500 kg Sale on behalf of customer, ex location near 55120 Mainz, without dismantling, without transport and assembly Crjdpe Ah Un Nofx Aktji Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Year of construction: 2017, machine/vehicle number: GA26, Used ROBINO & GALANDRINO RECORD 10000 wirehooder machineTechnical Specifications & Performance DataThe Robino & Galandrino RECORD 10000 is a wirehooder designed for the application of wire cages on bottles used in sparkling wine and champagne-style beverage production. Built in 2017, this industrial packaging machine supports the final closure stage after cork insertion, securing the cork with a correctly applied wire cage.Manufacturer: Robino & GalandrinoModel: RECORD 10000Machine type: WirehooderYear of manufacture: 2017Electrical supply: 400 V, 3-phaseFrequency: 50 HzCurrent marking: 6 AElectrical diagram: REC377Advanced Automation & Control SystemsThis wirehooding machine is configured for industrial bottle handling and cage application. Its three-phase 400 V electrical supply is suited to integration within an automated bottling and industrial packaging environment. The machine can be incorporated into coordinated line controls and bottle conveying systems according to the requirements of the existing production line.Production Line Integration CapabilitiesThe RECORD 10000 wirehooder is intended for installation in sparkling wine bottling operations, typically downstream of corking and upstream of final inspection, labeling or secondary packaging. A machine of this type can operate as part of a used bottling line handling glass bottles, where accurate positioning and tightening of the wire cage are essential for reliable cork retention.Its role in beverage production is particularly relevant for sparkling wine and champagne-style products, where the wirehood provides mechanical security around the cork during storage, transport and distribution. Integration should be coordinated with upstream corking equipment and downstream bottle transfer conveyors.Machine Condition & Maintenance HistoryThis second hand Robino & Galandrino wirehooder was manufactured in 2017. Its data plate identifies the machine as RECORD 10000 and provides the electrical supply details required for preliminary technical evaluation. Inspection of mechanical assemblies, wire cage feeding components, bottle guides, electrical equipment and safety devices is recommended before commissioning in a bottling equipment installation.Operational Performance & VersatilityWirehooding machinery applies and secures metal wire cages around corked bottles, supporting consistent closure quality for pressure-sensitive sparkling beverage applications. The process helps maintain cork retention and packaging integrity through subsequent labeling, packing, palletizing and distribution stages.For industrial packaging and beverage production, correct synchronization with bottle conveyors and the preceding corking process is important. Format parts and bottle-handling adjustments should be assessed according to the glass bottle dimensions, cork type and wire cage specification used by the intended production line.Installation Requirements & Site PreparationInstallation requires a 400 V, three-phase, 50 Hz electrical connection. The site should provide... Crodpfo Aia Elsx Aktsi

Condition: used, Year of construction: 2017, machine/vehicle number: SO149, Used KOSME KSB 6R rotary blow molding machine 12000 BPH - Year 2017Technical Specifications & Performance DataThis automatic rotary PET bottle blow molding machine is manufactured by KOSME and identified as model KSB 6R. Built in 2017, it is designed for forming PET bottles from preforms in industrial packaging and beverage production environments. The machine has a stated production capacity of up to 12,000 bph and was operated with six-cavity molds for the PCO 1881 neck finish.Manufacturer: KOSMEModel: KSB 6RYear: 2017Production capacity: 12,000 bphContainer material: PETMaximum bottle volume: 3.0LMold configuration: 6 cavitiesPreform neck type: PCO 1881Machine configuration: Automatic rotary blow molding machineAdvanced Automation & Control SystemsThe KOSME KSB 6R is an automatic rotary blower equipped with a preform feeding system. This arrangement supports a continuous supply of preforms to the blow molding process and is suited to integration within an automated PET bottling equipment layout. The rotary configuration is intended to support consistent bottle forming at the stated output rate.Machine-specific electrical data, control hardware and automation component specifications are not included among the available technical details. Installation and commissioning should therefore be planned around verification of the existing electrical interfaces, machine controls and safety circuits.Production Line Integration CapabilitiesDesigned for PET bottle production, this second hand blow molding machine can serve as the bottle-forming stage of a used bottling line. It is suitable for installations where PET containers are produced directly from preforms before downstream rinsing, filling, capping, labeling and secondary packaging operations.The included preform feeding system supports upstream preform handling. A chiller is available with the equipment and can support process cooling requirements. The compressor is not included, so a compatible compressed-air system is required for operation. The machine is configured for bottles up to 3.0L with PCO 1881 neck finish preforms.Machine Condition & Maintenance HistoryThe equipment was removed from operation in January 2026, dismantled and placed in storage. Its current condition is therefore classified as stored equipment. Operating hours are not provided. Buyers planning recommissioning should assess the condition of mechanical assemblies, pneumatic circuits, heating components, electrical systems and safety devices before installation.Operational Performance & VersatilityThis KOSME PET blow molding machine is intended for producing PET bottles used in beverage production and industrial packaging operations. Its six-cavity mold arrangement supported output of up to 12,000 bottles per hour. The documented configuration used PCO 1881 preforms, providing a defined neck-finish platform for compatible bottle and closure programs.Molds are excluded from the offer. Bottle design, final format and product application therefore depend on the... Cjde Aia Ewspfx Aktori

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Crjdpfexy Tm Iox Aktoi

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Crsdpfexy Tmnex Aktsi

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Crsdpfx Asz Iyvpektji

Condition: excellent (used), functionality: fully functional, total length: 2,285 mm, total width: 1,525 mm, total height: 2,135 mm, Butler Slotting Machine Model:8" Precision Table Area:508mm (Rotary) Throat:500mm Max Under Ram:400mm Stroke:203mm Crsdpfxsz S Nphe Aktji Dimensions: 2285 x 1525 x 2135mm

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Codpfxoxyfmgj Akteri Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 2012, condition: excellent (used), Now available: Mueller Apparatebau 6612 cutting system with complete pile stacking line Cjdpfohx Rkcjx Aktjri This machine is equipped wih following for processing continues feed, cutting and stacking - unwinder - Mueller apparatebau merger - Mueller apparatebau cutting system - Mueller apparatebau automatic collating table - Mueller apparatebau output belt Now available for a very good price!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 Csdpfxj Ahm Eys Aktori MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Credpeg Tu N Aofx Aktei Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Cedpfx Ake Agvnkstsri Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Cjdpjy Rnb Dsfx Aktori

Condition: new, Year of construction: 2026, tube diameter 8 - 230 mm workpiece weight 300 kg weight 2450 kg dimensions of the machine ca. 9374 x 1872 x 2285 mm Technical Specifications: Max. diameter of round tubing (mm): 8 - 230 Max. diameter of square tubing (mm): 8 - 230 Rectangular tubing (mm): 8 - 230 Profile (mm) Angle steel: 30 - 140 Channel steel: 50 - 140 I-beams: 100 - 140 H-beams: 100*100 - 140*140 Max. pipe material length (mm) 6500 Max. cut pipe length (mm) 3000 Max. workpiece weight (kg) / (kg/m) 300 / 46 Max. acceleration 1G Shortest remaining material (mm) 70 Positioning accuracy (mm) 0.05 Repeatability (mm) 0.03 Max. material thickness, carbon steel (mm) 16 Max. material thickness, stainless steel (mm) 12 Configuration 1. BodorPower laser source, 6 kW 2. BodorGenius T high-precision laser head with autofocus 3. BodorThinker Tube control system 4. Pneumatic chuck 5. Bodor Lightning perforation technology 6. Adaptive adjustment of jaw clamping force 7. Trailing servo unloading bracket 8. Composite rollersâ??screw roller and trailing pallet rollers 9. Automatic tube inspection 10. Automatic adjustment of cutting gas Cjdpfx Akj Agpg Retsri 11. Active anti-collision function 12. Gas-saving nozzles with stable flow 13. Intelligent maintenance reminder 14. Wi-Fi internet connection 15. Nitrogen proportional valve 16. Water cooling 17. Safety light curtains 18. Wear parts kit 19. Exhaust system 20. 3-meter unloading table 21. Option: Open clamping 22. Option: K-Loader Pro auxiliary feeding device: - Round tube: f25â??f220 mm Square tube: ?25â???160 mm Rectangular tube: 220 = side length = 25 mm, and diameter of the outer circle = 220 mm - Maximum pipe weight: 300 kg - Pipe loading length range: 5,000 mmâ??6,500 mm - Maximum loading weight: 1,800 kg

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Credpfsy Ayrrox Aktoi Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Credpfxewrmcpo Aktsi Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Credpswcldaefx Aktsi Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos