Used Picomax 54 for sale (3,422)

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Ksdpey N Du Defx Ah Sona Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. Knodszfybcopfx Ah Sea A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces).

Condition: new, maximum load weight: 30,080 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2026, Equipment: ABS, brand new BENALU BULKLINER S 95 tipper * SAF axles * A-axle as lift axle Kjdpfx Aotqw Dyoh Sjna * ALCOA DURABRIGHT aluminum rims * Bridgestone Regional tires * WABCO Smartboard * Aluminum chassis * Aluminum drop sides * 4 LED work lights * LED lighting multi-chamber lights * Towing eye * Plastic storage box * Water tank with soap dispenser * Stepladder * Broom holder * Aluminum trough * Swing-out end bows * Universal door (swing flap + doors) * One grain pusher per door leaf * GMP-capable * Grain hopper * Dust protection hose * Quick-release tarpaulin fastener (without side straps) * Tarpaulin color GREEN * Body painted RAL 6016 TUERKISGRUEN * Chassis painted RAL 9011 GRAPHITE BLACK * 3-year guarantee on the paintwork * ... For further information please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 256 mm, overall weight: 2,356 kg, number of axes: 4, This 4-axis AgieCharmilles Roboform 54 was manufactured in 2000. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 256 mm. The machine can accommodate workpieces up to 850 x 650 x 256 mm and has a maximum workpiece weight of 400 kg. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Roboform 54 machine we have for sale. Contact us for further details. • Taper (conicity): ±30° / 100 mm • Max. workpiece dimensions: 850 x 650 x 256 mm • Max. workpiece weight: 400 kg • Best surface roughness: Ra ≤ 0.2 µm • Best precision: ±0.005 mm • Generator model: 3R-600.83 • Electrical supply: 3~ 400 V / 50–60 Hz Knedsy Eq Uvopfx Ah Sja • Installed power: 5 kVA • Current: 5 A

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Knedpsy Dcivsfx Ah Ssa Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: used, mileage: 635,000 km, power: 220 kW (299.12 HP), first registration: 07/2015, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Setra S 415 UL Euro 6 * Mercedes-Benz engine 220 kW Euro 6 * ZF Ecolife automatic transmission * Adaptive cruise control (ART) * ESP, ABS, ASR * Automatic climate control * Webasto auxiliary heater pre-selectable * 49+1 high-backed seats with seat belts, leather headrests & fold-away armrests * 30 standing places * Door 2 extra-wide double-leaf * Wheelchair space * Radio, CD MP3, microphone * LED matrix displays on 3 sides with LAWO SICMA-Control unit * Prepared for interior display * 2 electrically operated roof hatches * Luggage compartment with lighting * Night lighting * Stop request buttons * Handrails/grab rails * Retarder * Fog lights * Electrically adjustable and heated exterior mirrors * Air-suspended driver's seat with 3 air chambers, rotatable * Electric front windscreen blind, driver window blind * Fare table/preparation for ticket printer * School bus switch * Bus stop brake * Wheel trims * Approved for 100 km/h Kjdpfx Aheza N Sus Sjna All information subject to change and without guarantee. Viewing possible at any time by prior appointment! Further information: also available via WhatsApp Information in Polish: WhatsApp Your French-speaking contact: Georges Spengelin

Condition: new, maximum load weight: 29,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 54 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5696 New vehicle! Available for rent, purchase, or lease with an option to buy! 54 m³ Kempf grain tipper semi-trailer with a discharge gate / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Type: SKM 36/3 AK - High-performance discharge gate tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00 m x 2.43 m wide x 2.20 m high) * Total weight: 36,000 kg * Unladen weight according to manufacturer: 7,000 kg * Payload: approx. 29,000 kg * Axles: 3x SAF axles / 1st axle can be lifted / disc brakes * Tires: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with raising and lowering / quick release * EBS Wabco * Combination door (swinging + split door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Kempf 400 steel discharge gate with a throughput rate of 30-40 m³/h, with control panel on the rear right * 2x partitions with 3 locking positions * Open hose storage on the right * 1x grain slide with hopper * 1x vibrator * Saddle height of 1,170 mm - 1,230 mm * 1x approx. 4.00 m ladder on the left Kodpfx Ahoy U Dlys Sona * 1x water tank on the right * 1x air connection on the rear left * 2x toolboxes on the left * Individual mudguards * Aluminum outrigger supports (full load supports) * Tarpaulin with central locking * Operating platform at the front with access ladder on the left * Folding tarpaulin supports * 3x crossbeams * Sight glass at the rear right * Loading pressure gauge * Shovel and broom holder * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights New vehicle! Also available for RENT! Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, errors may have occurred in the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 29,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 54 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5696 New vehicle! Available for rent, for purchase, or for lease with an option to buy! 54 m³ Kempf grain tipper trailer with a loading chute / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Type: SKM 36/3 AK - High-performance loading chute tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00m x 2.43m wide x 2.20m high) * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 7,000 kg * Payload: approx. 29,000 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tires: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with raising and lowering / quick release * EBS Wabco * Combination door (swinging + split door (2/3 + 1/3)) * pneumatic 4-hook locking system * Kempf 400 loading chute made of steel with a throughput of 30-40 m³/h with control box on the rear right * 2x partitions with 3 locking positions * open hose storage on the right * 1x grain slide with hopper * 1x vibrator * Saddle height from 1,170mm to 1,230mm * 1x approx. 4.00m ladder on the left * 1x water tank on the right * 1x air connection on the rear left * 2x toolboxes on the left * Single mudguards * Aluminum outrigger supports (full load supports) * Tarpaulin with central locking * Operating platform at the front with access on the left Kjdpfx Asy U Dl Tjh Sena * folding tarpaulin supports * 3x crossmembers * Sight glass on the rear right * Loading pressure gauge * Shovel and broom holder * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights New vehicle! Also available for RENT! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, errors may occasionally occur in the text or the specifications. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: like new (used), This type of machine is suitable for dispensing the following products: mustards, baby food, sauces, pastes, jams, etc. Kedpfx Aozbi Ewjh Ssna With their filling device, these machines are equipped for dispensing viscous products. The output varies depending on the product, format, and filling capacity. Features: Spindle feed.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 15507225, functionality: fully functional, operating hours: 9,980 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 32, rotational speed (max.): 20,000 rpm, rotational speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 420 mm Travel Z-axis: 610 mm Feed rates: 1 - 20 m/min Machine pallet Pallet dimensions: 1,260 x 490 mm T-slots: 9 x 12H8, 50 mm spacing Max. spindle speed: 50 - 20,000 rpm Tool system Tool holder: SK30 Number of tools in magazine: 32 MACHINE DETAILS Control: HEIDENHAIN iTNC 530M Dimensions & Weight Dimensions / Weight: 2,500 x 2,560 x 2,700 mm Installation dimensions: 4,300 x 2,950 x 3,012 mm Weight: 5,100 kg Connected load: 22 kVA Operating hours Spindle hours: approx. 9,980 h Control on-time: 78,165 h Machine on-time: 91,869 h Program run time: 54,682 h EQUIPMENT Knedpfx Aheyznvce Sja 3D touch probe, infrared Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with dual dispenser FEHLMANN HSC settings (Cycle 327) Note: The clamping devices and tools shown in the images are not included in the scope of delivery.

Condition: used, mileage: 796,179 km, power: 220 kW (299.12 HP), first registration: 02/2002, fuel type: diesel, number of seats: 54, gearing type: mechanical, emission class: euro3, color: green, brakes: retarder, Equipment: air conditioning, * Setra S 315 UL * Intercity bus * 54 seats * Manual transmission * Retarder * Air conditioning * Webasto * VIN: WKK62710113002870 * Mercedes engine * Engine type: CM457HIA * 6 cylinders * Euro 3 * kW: 220 * Displacement: 11,967 cc * Unladen weight: 12,650 kg * Gross weight: 18,000 kg * Wheelbase: 6,080 mm * Vehicle length: 12,000 mm * Vehicle width: 2,500 mm * Vehicle height: 3,340 mm * Tires: 295 / 80 R 22.5 * (ACCIDENT) Front slightly damaged Kjdpfx Aeq Ra Nqeh Sena * Windshield has a crack * Net price * All information provided without guarantee or warranty Tel./WhatsApp:

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Kodpfey Ur Aajx Ah Sjna Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace

Year of construction: 2008, condition: used, Type of fuel: Diesel Power: 33 kW (45 HP) Number of cylinders: 4 Knjdpfx Ajy T Rgheh Sea Empty weight: 1.800 kg Carrying capacity: 400 kg GVW: 2.200 kg Make of engine: Kubota

Year of construction: 2007, condition: used, Power: 33 kW (45 HP) Ksdpfjy T Rgbox Ah Sjna

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) Kjdpfjwmwrdsx Ah Sona with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis Wenzel LH 54 CMM machine was manufactured in 2003. It features a measuring range of 500 mm in the X-axis, 1000 mm in the Y-axis, and 400 mm in the Z-axis. The machine includes a granite structure base, air bearing guideways, and a portal design, making it suitable for quality assurance and series production applications. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 54 CMM machine we have for sale. Contact us for further details. • Condition: completely checked and retrofitted; new software • Machine design: granite structure base; air bearing guideways; portal design • Applications: quality assurance; series production • Availability: currently powered and available for demonstration • Calibration/verification: factory calibration certificate available; determination of length measurement uncertainty, probing uncertainty, and repeatability range • Measuring range: maximum space diagonal 4660 mm • Measurement uncertainty: E0 = 2.5 + L/300 µm • Controls and software: controller WPC2040 Basic; installed software WM Quartis R2026-1 • Probe system: TP20; probe head PH10T; probe head interface PHC10-3 PLUS; probe interface PI200 Combi; joystick HT400 • Options and services: measurement program creation for customer parts available; optional upgrade with Renishaw SP25M probe system (additional hardware and service included with upgrade); additional software modules on request; custom accessories and fixturing systems available Additional equipment • PC system with Windows 11 (compliant with current Wenzel requirements) and WM Quartis R2026-1 installed • 2 × 24" TFT monitors (new) • Mouse and keyboard • Probe change rack MCR20 (unpopulated/empty) Kodpfx Aeyxqfujh Sena • 1 × TP20 Standard Force Module • Stylus kit M2

Year of construction: 1994, condition: good (used), machine/vehicle number: ST 151, Load capacity and weighing range: 2 t Knjdpfx Ahod Awnte Sea Fork length: 1100 mm Fork width: 170 mm Load center distance: 600 mm Lifting range: 78 - 198 mm Space requirement: 1500 x 560 x 900 mm Weight: 64 kg

Condition: good (used), Table size 420 x 250 mm. Speeds: electronically controlled, stepless via potentiometer, 132 - 4500 rpm. Ksdjyywn Espfx Ah Sjna

Condition: excellent (used), Digital display Heidenhain Type: conventional Table KS 320 D Clamping surface: 530 x 270 mm Speed: 125 - 4400 rpm Knedpoyv Af Uofx Ah Sea Feed: 0.03 – 0.40 mm/rev Drilling capacity in steel: 22 mm Thread cutting up to M16 Milling capacity in steel: 25 mm Drill spindle stroke: 120 mm Spindle motor power: 0.51 / 1.47 kW Dimensions: 2000 x 1200 x 1000 mm Weight approx. 900 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 260 mm, table width: 770 mm, table length: 320 mm, overall weight: 1,500 kg, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Knedpfx Ahoynwf So Soa Model: 51 DC Year of manufacture: 1994 Technical data: Travel: 450 x 260 x 560 mm Table size: 770 x 320 mm The machine is in a very well-maintained condition and can be inspected at our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW Kjdpjuxprlsfx Ah Sona >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, LCV-54 Horizon Stream Delivery, used The Horizon LCV-54 Stream Delivery is an efficient and precise solution for stacking folded printed products, specifically designed for use with Horizon folding machines. Key Features - Stream Delivery: The LCV-54 provides consistent and orderly stacking of folded products, facilitating further processing and increasing efficiency - Height Adjustable: Flexible adjustment of the inlet height allows for optimal integration into various production environments - Wide Compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Inlet Height: Maximum: 911 mm; Minimum: 429 mm - Format Range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine Speed: Up to 240 m/min Knedow Ew Amjpfx Ah Sja

Condition: excellent (used), Year of construction: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Z-axis quill stroke 110 mm Machine head travel 450 mm Table spindle nose 0 – 527 mm SF 32 quick-change system Knedpfxowkrp Es Ah Sea Work spindle 2.9 kW Speed range continuously adjustable 50 – 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space required W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Condition: excellent (used), Heidenhain digital readout. Fehlmann cross table: KS 255. Accessories: available. Working range: Quill stroke Z-axis 110 mm Machine head travel 450 mm Table spindle nose 0 - 527 mm Quick-change systems SF 32 Work spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 255 x 550 mm Dimensions and weight: Kodpfx Asw Hqdmjh Sona Space requirement W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Condition: excellent (used), Control system: Heidenhain TNC 124 Travel distances X/Y/Z: 450/260/120 mm Travel distance W: 450 mm Clamping area (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Feed rate X/Y: 1 – 2000 mm/min Tool – quick-change system: SF 32 Speed range, continuously variable: 100 – 9200 rpm Drive power: 5 kW Knedpfx Aoipmmujh Sea Space requirement (W x D x H): 1500 x 1480 x 2330 mm