Used Plants for sale (2,927)

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Djdjxx Tigjpfx Afnecc Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Dcsdoxx N T Ijpfx Afnsc Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2007, Overview The machine was built in 2007 by Spanish company Seppelec. The machine is still assembled but not in use since the factory closed the production. Before decommissioning, the machine was intensively maintained and tested with phosphorescent material.   Techn. Details Capacity: 13,500 l/ h Pressure to prevent degassing: 7 bar Temperature while pasteurizing: 85°C Machine documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control: Siemens S7-300 Cpu 314 2dp Communication port type: Profibus Dcedpfxoq T Ak Hs Afnec

Condition: used, Year of construction: 2021, operating hours: 200 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Dcedpsvnq Trsfx Afnjc Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: Dedpfx Aexx N Dgjfnscc - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Dcsdpfevnq Rksx Afnec Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, MARINI-ERMONT TSM17 asphalt plant drum tube: Drum thickness: 10mm, Cone thickness: 12mm, Large end diameter: 2,100mm, Drum diameter: 1,700mm, Length approx. 11,000mm, 2 bearing rings, Radiation-proof blades in A42CP steel, Curtain blades: HARDOX 400, Recycling ring, Burner face, 4 gear motors IE3 standard + rollers. The tube was commissioned in January 2022 and decommissioned in November 2023. Dcodpfexf T Ucex Afnsc

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Dcodpswcwbqefx Afnjc

Condition: good (used), basket dimensions 0 control 0 total power requirement 0 kW weight of the machine ca. 0 t ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power* (W) 800 Djdpfx Aeyfh Rtjfnscc Heating power (W) 800 Usable volume (liters) 8.6 Weight (kg) 14.8 Tank material: Stainless steel Housing material: Stainless steel 1.4301 External dimensions (W / D / H) (mm) 390 x 330 x 410 mm Usable dimensions W / D / H (mm) 300 / 240 / 140 With basket

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Dodsxx Rvkjpfx Afnecc Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Dodpfx Aoxd T Hcsfnscc Delivery date to be agreed upon

Condition: good (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, Equipment: Methor "hook lift" basic package - 24 V electric control - maintenance-friendly engine compartment with LED light - folding hopper with position sensor and automatic control - hydraulically reversible fan wheel - acoustic start-up warning - paintwork: RAL 2011 deep orange Additional equipment: Hook lift in accordance with DIN 30722-1 (Germany) Crushing system size L (8 teeth) Three-phase motor 200 kW-EUROPA + electric pump Radio system hook lift large Rear conveyor 6.9 m Frame for overband magnet Overband magnet Additional hydraulic connection 70 l/min Dsdpsvrw Tmofx Afnocc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 200 kW (271.92 HP), Boost your waste wood processing efficiency with this Komptech CRAMBO 5200 E direct, a robust industrial shredder renowned for its high throughput and reliability. Manufactured in 2016 and in used condition, this model features a powerful electric drive, delivering consistent performance with low operating costs and noise levels. The integrated Multistar 2-SE star screen ensures precise material separation, complemented by a swivel conveyor and overband magnet for enhanced sorting and metal removal. Complete with control cabinets, this shredder is ideal for operations seeking advanced processing capabilities and maximum productivity. Don’t miss the opportunity to upgrade your plant with this proven solution from Komptech. Djdpfx Aexv Acqofnjcc

Condition: excellent (used), Year of construction: 2011, TOP TOWER 3000 asphalt mixing plant comprising: Ermont dryer drum + CBS burner + filter and hopper below filter + mixer, 6 dosing hoppers. 2 bitumen storage silos. Year: 2011. Capacity: 200 tons/hour. Dcedpsxpm Ttofx Afnsc

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Dcedpob Ny Eyefx Afnsc Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: used, Year of construction: 2014, operating hours: 7,400 h, functionality: fully functional, BRAND: WILLIBALD MODEL: EP5500 Dsdpfx Afeyg Hyvjnscc YEAR: 2014 HOURS: 7,400 EXTRAS: 48 hammers SERIAL NO.: #134 REGISTRATION NO.: 98.14.XX-552 SALE PRICE: €160,000.00

Condition: excellent (used), Plan B tipping boards with knobs Dusting with flour is not necessary Dsdpfx Ajghr Nnjfnecc Due to special knobs on the boards, the dough pieces cannot stick Tipping boards 58.5x38.5x4.5 cm

Condition: like new (used), Year of construction: 2017, functionality: fully functional, The system was specifically designed for surface treatment of implant products and operated at a German implant manufacturer. Accordingly, the system is configured for process-safe, reproducible applications in titanium/medical technology (anodizing Type 2 & Type 3). POLIGRAT model POLICOMPACT TitanColor-G – Anodizing System Application area: Implant products / medical technology Process: Anodizing (Type 2 & Type 3) Year of manufacture: 2017 Original purchase price: €756,913.14 COLORING (ANODIZING) OF METAL SURFACES Dcodoycl Scjpfx Afnsc Colored metal surfaces with various structures and finishes provide a wide and attractive range of possibilities for decorative as well as technical applications. POLIGRAT offers the following processes for coloring: Titanium (TITAN COLOR I, TITAN COLOR II, and TITAN COLOR G) Zirconium (ZIRCOLOR), niobium, and tantalum COLORED GLASS CERAMIC COATING BASED ON SOL-GEL – VEROSPECTRAL Application by spraying, as rack-mounted parts, for: Stainless steel Other metals upon request: aluminum, steel, zinc

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Dodpfxjycl Abe Afnocc Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Pressure test date: 03./04.07.2017

Condition: refurbished (used), Year of construction: 2003, Koenig Mini Rex 4000 bun roll machine 2-pocket new drum and pistons SKG54-AKG70 weight range 25-140 grams Dcsdpfsrf Dn Eex Afnsc cap. pcs/h 4000 year of build 2003

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a complete and fully functional LP22 pelletizing plant, characterized by its high efficiency and reliability. Year of construction: Q4/23 Commissioning: Q1/24 The pelletizing plant includes the following components: HA1100 Chipper: Powerful chipper for optimal size reduction SMC500/700 Cutting Mill: Precise cutting mill for versatile applications Dodpfx Afowlqu Nsnjcc SMU60 Extraction and Filtration System: Efficient extraction and filtration for a clean working environment MB3LPS Material Hoppers (2x): Robust material hoppers for large capacities DS25 Dosing System (2x): Precise dosing for consistent processing LP 22 Pellet Press (2x): High-quality pellet presses for the best results Screening System with Conveyor Belt (2x): Efficient screening systems for perfect sorting Big Bag Rack Vario 1.5 & Big Bags (20x): Flexible storage and transport AS900 Bagging System: Reliable bagging system for easy handling Further technical details can be found in the attached images. We will be happy to send you the detailed exposé by email upon request.

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Djdpfx Afsuanqasnjcc Your service team Mertens & Frowein GmbH

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt Dcedpfxoufih Dj Afnjc 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container

Condition: good (used), functionality: fully functional, Processing plant for (track) ballast 40 cbm feed hopper with push cart OMT 120 kW impact mill with feed and discharge chute Double-deck screening plant 1,400 x 4,000 m Dedpfx Afetpamgsnocc with conveyor and stockpile belts Complete electrical installation

Condition: used, Screen area: 1,500 x 4,500 mm upper and lower deck with plastic screening surfaces Dcedpjtpgwlefx Afnsc