Used Pneumatic Stapler for sale (8,211)

Year of construction: 2001, condition: good (used), Top-feeding stapler with clamping anvils. For use with collated staples. Used to close filled folding cartons made of single and double-wall corrugated cardboard. Economical solution for closing corrugated cardboard boxes with interlocking and overlapping flaps using clamping anvils. Suitable for single and double-wall corrugated cardboard. Adjustable penetration depth to suit the type of cardboard. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency is required. • Housing made of hardened steel for long-lasting durability. • Clamping anvils return immediately: up to 20 stapling cycles per minute. • 1000 staples per coil: up to 10 times less frequent reloading compared to conventional staplers. For comfortable operation, use a balancer in combination with a swivel arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler • For CR 1/34 spiral staples, arm length 18 mm, • With noise silencer Gujdsz Skpwopfx Aihjh • With automatic clamping anvil return. • The clamping anvils are specially hardened, which extends their service life.

Condition: as good as new (ex-display), Used High Pressure Concrete Nailer HN 25 C2 MAX Powerlite The HN25C2 is a compact nailer for concrete and steel, allowing you to work as close as 6 mm from the edge, making it ideal for tight corners. Its main area of application is work on metal stud framing. The nose of the HN25C2 is compact, meaning you can also work with thin metal profiles. With special nails, it can penetrate steel up to 5.0 mm thick or drive nails into concrete with a compressive strength of 60 N. Technical specifications: • Operating pressure: 12–25 bar • Nail length: 15–25 mm • Magazine capacity: 100 nails • Air consumption: 1.6 ℓ/cycle at 18 bar operating pressure • Weight: 2.0 kg Gsdpfx Aioyizrfjhsuh The nailer was used for demonstration purposes and is therefore classified as used. It is in perfect technical condition. Supplied in a transport case with user manual. For further details, please refer to the pictures. You will receive an invoice with VAT shown separately. Payment in advance (bank transfer) only – no PayPal! Collection from our shop is of course also possible. Shipping by UPS – shipping costs €8.90. If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 Guodpszkvb Nsfx Aiheh For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Guedpov Im Ncsfx Aiheh Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request.

Condition: used, Second-hand Schleicher ‘Perfect’ frame stapler for producing mitre joints in picture, mirror or furniture frames that can bear weight immediately. Technical data: - Smallest frame: 60 x 60 mm Gjdpfxez Iluwe Aihjuh - Drive: Pneumatic

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Guedpsxwpitofx Aihjh Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at at 10 - 2.92 Guedsrb A Sfopfx Aihjh CIS (bar) - 10 INVERTER - yes

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: Gusdsv U Ad Nopfx Aihjh New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: - No-load speed: 20,000 - Power: 400 W - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Guedpfx Aijzfzagshoh Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Guedpfx Aoh A Sfdeihjh Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: repair required (used), functionality: not functional, Forklift, in need of repair, 4000 kg load capacity. Gsdpoz Dth Defx Aihouh

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Godpfxsxwu Rcj Aihouh Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Length: 233 mm Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Min. hose diameter (5 m hose length): 0.38 in Min. hose diameter (5 m hose length): 9.5 mm Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Condition: like new (used), empty load weight: 2,300 kg, maximum load weight: 20,000 kg, overall weight: 22,300 kg, next inspection (TÜV): 11/2025, loading space length: 5,000 mm, loading space width: 2,000 mm, tire size: 450x300, color: orange, Year of construction: 2026, operation weight: 20,000 kg, Heavy-duty transport trailer with dimensions 5000 x 2000 x 610 mm. Payload of 20 tons at 6 km/h. All-wheel steering with kingpin axles and adjustable track rods. Tyres: solid rubber 450 x 300 on steel rims with double-sided tapered roller bearings. Drawbar with forged 40 mm towing eye and fall protection. Transport floor made of 40 mm spruce, countersunk and bolted. Lashing eyes for load securing welded to the frame on each longitudinal side. Double-acting wheel chock mounted on the frame. Gsdpen D D S Sjfx Aihsuh

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Godpfx Asz R A Iujihsuh

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Gjdpfez Duhxox Aihouh Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" Gjdjxwn R Aopfx Aiheuh min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Gujdpjv Tbh Rofx Aihjh Weight with battery & reaction arm: 9.0 lbs

Year of construction: 2004, condition: excellent (used), LARIUS 10:1 pneumatic press Godpoz Sk Uyjfx Aihsuh For sale: a pneumatic press from the renowned company LARIUS, manufactured in Italy. This device is designed for dispensing high-viscosity liquids – ideal for lubricants, adhesives, industrial paints, silicones, etc. Technical specifications: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Output: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Manufacturer: LARIUS – Italy In very good condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Guedpfxsv Tbz Dj Aihjh Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: used, Year of construction: 2025, TPW 30 AL - AS with all-wheel drive, axle stub steering, and tires 559x300 Gsdpfehbmuksx Aihjuh Transport platform made of Douglas fir wood, 40 mm thick, Dimensions: Length 4000 Width 2000 Drawbar 1600 mm with towing eye 40 mm and safety mechanism with height adjustment Paint finish: RAL 2000 #In-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 tons to 100 tons #Heavy-duty transport platform trailers #Platform heavy-duty trailers #All-wheel steering #Transport trailers

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free Godpfxsvptx To Aiheuh

Condition: like new (used), functionality: fully functional, machine/vehicle number: FR Jungheinrich, Year of construction: 2020, load capacity: 1,000 kg, lifting height: 6,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,600 mm, fork length: 1,200 mm, tire condition: 95 %, Equipment: head guard, lighting, sideshift, Jungheinrich EFG 550 Electric Front Forklift, 450 hours, Year 2020, 6200mm lift height Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2020 Operating hours: 485 (may vary, machine is still in use) Gsdpopq Id Refx Aiheuh Technical condition: very good Optical condition: very good Mast type: none, lift height: 6,200 mm Overall height: 2,600 mm Free lift: 1,800 mm Fork carriage / side shifter Fork length: 1,200 mm Incl. charger In very good condition Pickup by appointment only in 79111 Freiburg. Shipping by freight carrier possible, please inquire with your postcode.

Condition: used, TOX Pressotechnik Industrial Pneumatic Press Station / Pneumohydraulic Press with Roller Guide Table (6 bar, 2.4 m), Used Equipment Technical Data: Type: Industrial Pneumatic / Pneumohydraulic Press Station Overall Dimensions (W × D × H): 1300 × 1270 × 2400 mm Roller Feed Conveyor Dimensions: 470 × 500 mm Work Table Internal Opening / Clearance: 450 × 550 mm Press Cylinder and Drive Data (TOX Pressotechnik): Manufacturer: TOX Pressotechnik GmbH (Made in Germany) Type: Q-K 015.030.200.12 Serial No.: 340379.117 System: Pneumohydraulic power cylinder (TOX Powerpackage) Maximum Air Pressure: 6.00 bar Oil Volume (ΔV): 135 ml Equipment and Features: Enclosed, sound-insulated safety cabin with inspection window and upward-opening door Heavy-duty four-column press frame for precise parallel alignment Integrated roller feed conveyor for easy workpiece handling Pneumatic air preparation unit (pressure regulator and filter) and emergency stop button Guodpfx Aijz Rxb Dehsh Overall Dimensions: Width: 1300 mm Depth: 1270 mm Height: 2400 mm

Condition: good (used), Year of construction: 2012, Approx. 170 units, pneumatic drive, spool valve, M&S, PAMS1 – used: Price per unit, ex works: €300.00 (net)! Manufacturer: M&S Type: PAMS1 Year of manufacture: 2012 Spring (normally closed) Operating pressure: 4.8 - 8 bar Air consumption: 1.2 – 2 L/stroke Condition: good Gedpfjz Sdyisx Aiheuh Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Gjdpfx Aiov Tbpzshjuh Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.