Used Pocket Hole for sale (4,259)

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123023_1 – Manufacturer: Kögel. * Sliding roof tarpaulin * Double corner fittings * Insertion strip (wood) * Outline marking on the side/rear * Load certificate Code-XL * Multi-hole strip * Portal door with double swivel bar locks (inside) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing options * Perforated pallet retaining strip Guedpfo Agd Hzox An Eoi Used roof tarpaulin. Financing available upon request. Financing possible. Weatherproof storage container, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Used tarpaulin. Technically ready for use, no further repairs needed. Partial paintwork. Substructure (KTL) coating with signs of wear. UVV certificate valid. UVV documentation available. Interchangeable container with lettering (see photos). LASI CODE XL!!! Multiple units available! Dimensions are approximate. Offer subject to change; we reserve the right to sell the item in the meantime. Prices are net, ex works D-59302 Oelde. Further details upon request by phone or email.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Gusdps Agt E Sefx An Eoi

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Gjdpfe Agt Hajx An Eoui

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer ramp and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load display, vehicle hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = price: €1,000, -- Printing errors, mistakes and changes reserved, sample images only --, More data at: !, More details: ! Godpfxe Agt Hhj An Eeui

Condition: good (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply Godpfx Anoxyf E Nj Esui • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 10,000 rpm, travel distance X-axis: 108 mm, travel distance Y-axis: 104 mm, travel distance Z-axis: 140 mm, spindle motor power: 3,700 W, total height: 1,597 mm, total width: 837 mm, overall weight: 1,150 kg, controller manufacturer: FANUC, product length (max.): 1,622 mm, number of axes: 4, This 4-axis Citizen Cincom B16 was manufactured in 2013. It features a maximum machining diameter of Ø16 mm and a maximum machining length of 135 mm. The machine includes a main spindle speed range of 200–10,000 rpm and a counter spindle with a maximum chucking diameter of Ø16 mm. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom B16 horizontal turning machine we have for sale. Contact us for further details. Machining capacity • Maximum machining diameter: Ø16 mm • Maximum machining length: 135 mm • Main spindle through-hole diameter: Ø20 mm • Maximum front drilling diameter: Ø6 mm • Maximum front tapping: M6Travels • A2/back-spindle axis travel: 200 mmRapid feeds • X-axis: 21 m/min • Y-axis: 21 m/min • Z-axis: 15 m/min • A2-axis: 15 m/minMain spindle • Speed range: 200–10,000 rpm • Maximum speed with rotary guide bushing: 8,000 rpm • Motor: 2.2 / 3.7 kWCounter spindle (back spindle) • Maximum chucking diameter: Ø16 mm • Speed range: 100–6,000 rpm • Maximum drilling diameter: Ø5 mm • Maximum tapping: M3 • Motor power: 1.0 kWDriven tooling • Maximum drilling diameter: Ø5 mm • Maximum tapping: M4 • Tool spindle speed: 100–4,500 rpm • Drive motor: 0.5 kWTooling • Total mountable tools: 15 • Cutting tools: 5 • Secondary machining tools: 2 • Front drilling tools: 4 • Back drilling tools: 4General • Input power capacity: 5.2 kVAUnits available and hours • Unit 1 • Manufacture date: 05/2013 • Power On: approx. 82,600 h • Run Time: approx. 31,847 h • Cutting Time: approx. 22,613 h • Unit 2 • Manufacture date: 06/2013 • Power On: approx. 81,474 h • Run Time: approx. 31,403 h • Cutting Time: approx. 20,127 h Additional equipment • Bar feeder: FMB Minimag 20 / 3200 C • Unit 1 bar feeder year: 2014 Gjdpfx Anj Afxqqo Esui • Unit 2 bar feeder year: 2013 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2005, Horizon AFC-546 AKT is a proven 6-buckle folding machine designed for professional print shops and bookbinderies. It features "Touch & Work" technology that enables intuitive operation via a touchscreen. Gjdsw Evc Ejpfx An Eoui Special Features: - First folding unit with 6 pockets and a knife, plus a second folding unit with 2 pockets - Automatic fold roller adjustment for precise folds - 17 pre-programmed standard fold types - 100 memory slots for repeat jobs - Fully automatic knives in the first and second folding units Technical Specifications: - Format range: 120 x 172 mm to 540 x 760 mm - Paper weight: 40–250 g/m² - Performance: up to 40,000 cycles per hour - Maximum stack height: 650 mm - Power supply: 400V / 50Hz, 2.7 kW - Dimensions: 2,780 x 1,050 x 1,680 mm - Weight: 1,350 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2018, offer consists of: - punch unit HP-200A Horizon HP-200A punch unit Godpexr Ahljfx An Eoui - features: press- and punch - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 356x508mm; min. 120x90mm - punch thickness: max. 4mm - speed: max. 4000 Broschüren/h - power: 230V / 50Hz - 0,68kW - dimensions: 500x770x1035mm - weight: 168kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Various printing units/knifes etc, see pictures. Technical details: Book formats: Height: 70 - 170 mm Width: 70 - 115 mm Thickness: 1 - 15 mm Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs Gusdpfsxdxnfjx An Esi

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Godpfxeiyx Dij An Eeui Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1993, Overview This Klinger Serpende bottle washer was built in 1993 for cleaning returnable glass bottles in caustic baths. Its nominal output is 7,000 bottles per hour on 2 L bottles, adjustable between 4,000 and 8,000 bottles per hour. The machine works with plastic bottle carriers, 16 bottles per row, and takes bottles up to 95 mm in diameter. Construction is stainless steel, controlled by a Siemens SIMATIC S5 PLC with an operator panel at the machine. Suitable for water and soft drink lines running returnable glass. Technical data - Manufacturer: Klinger - Model: Serpende - Year of manufacture: 1993 - Machine type: bottle washer for returnable glass bottles, caustic bath cleaning - Nominal output: 7,000 bottles/h (2 L bottles) - Control range: 4,000 - 8,000 bottles/h - Bottle diameter: max. 95 mm - Bottle carriers: plastic, 16 bottles per row - Carrier rows: 117 in total, 100 loaded (1,600 bottle pockets) - Cycle time: 8.2 s - Total treatment time: 16 min - Pre-soak: 3.0 min holding time, 2.6 min treatment time - Caustic bath: 7.1 min holding time, 5.0 min treatment time - Cooling: 3.0 min holding time, 2.1 min treatment time - Material: stainless steel - Dimensions: approx. L 9,000 x W 3,300 x H 3,050 mm - Weight: approx. 19,000 kg Equipment - Plastic bottle carriers for bottles up to 95 mm diameter - Siemens SIMATIC S5 control in a separate control cabinet - Operator panel with keypad and emergency stop - Bottle infeed and discharge Condition Used. The machine is already dismantled and in storage. Availability Gusdpo Agac Rofx An Esi Immediately. Location: Italy. Preparation and loading by the seller, EXW loaded.

Condition: new, functionality: fully functional, Year of construction: 2026, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany Gsdpfx Ansupiapo Eoui The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: excellent (used), Electric motor, three-phase motor -Condition: unused -Power: 5.5 KW -Speed: 2840 rpm Gsdsb A Sliepfx An Eoui -Shaft: Ø 28 mm -Design: B3/B5 -Protection rating: IP 54 -Flange recess: 180 mm -Flange hole circle: 215 mm -Flange outside diameter: 250 mm -Foot holes: 190 x 140 mm -Price per piece -Pieces: 19x available AEG -Pieces: 19x available ECO Air -Piece: 25x available ECO Air without fan wheel -Dimensions: 370/270/H250 mm -Weight: 30 kg

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Gusdpfjyxn I Hsx An Eji

Condition: new, pressure: 150stroke: 300working speed: 20Speed : 165messurements (LxWxH): 2200 x 2200 x 3250 HKP 150 – Hydraulic C-Frame Deep Drawing Press Standard Equipment: - Steel welded construction - Two-hand control panel - PLC control - Ram table with prismatic, maintenance-free slide system - Hydraulic components from well-known brands Gsdpfjd Ab Igjx An Esui - Electrical components from well-known brands - Designed in accordance with CE regulations - User manual in English or German Technical Specifications: - Press Force: 1,500 kN - Hole in Die: Ø 120 mm - Stroke: 300 mm - Motor Power: 11 kW - Working Pressure: 254 bar - Machine Weight: 8,200 kg - Advance Speed: 85 mm/sec - Working Speed (at max. pressure): 20 mm/sec - Return Speed: 165 mm/sec - Centre Distance: 320 mm - Die Table Dimensions: 750 × 1,200 mm - Ram Table Dimensions: 650 × 950 mm - Throat Depth: 550 mm - Machine Dimensions (L × W × H): 2,200 × 2,200 × 3,250 mm Optional Equipment: - Light curtain for additional safety: Standard - Touchscreen control: ¤ 8.880 net - Special table dimensions and stroke lengths available: Price upon request

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 250 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DVK System Master 1 RE was manufactured in 2020. It features a robust working area with X-axis travel of 250 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 25 kW spindle and an automatic tool changer with a capacity of 32 tools. If you are looking to get high-quality machining capabilities, consider the DVK System Master 1 RE horizontal machining centre we have for sale. Contact us for further details. • CNC control: FANUC CNC with 10.4" colour operator panel, PLC, Ethernet connectivity, dedicated machine software • CE certified • Working area: • Birotational clamping vise axes: A-axis 360° continuous, B-axis 360° continuous • Spindle: • Type: OMLAT electrospindle • Torque: 80 Nm • Tool interface: HSK-A63 • Tool magazine/ATC: • Automatic tool changer • Max tool diameter: 70 mm (150 mm with adjacent pockets free) • Random tool selection • Clamping system: • Self-centering birotational hydraulic vise • Jaw stroke: 50 mm • Clamping force: 5,000–30,000 N • Cooling & lubrication and services: • Liquid-cooled spindle • Centralized automatic grease lubrication • Pneumatic system • Hydraulic system • Air-water heat exchanger • Machine pressurization system • Machine data: • Installed power: 55 kW • Supply voltage: 400 V / 50 Hz Additional equipment • Robot automation: • FANUC M20iA/20M anthropomorphic robot, 6 axes, 20 kg payload • Schunk PGN125 two-jaw gripper • Pallet system: • Two vertical pallet magazines • Pallet size: 480 × 300 mm • 54 pallet positions per magazine (standard) • Chip/coolant and extraction: • Internal coolant through spindle • 60 µm cartridge filter • MAHLE self-cleaning 60 µm filter • Rain-type work area washing system • Chip conveyor with drag chain and rotofilter • Coolant chiller • Oil mist extraction system • Measurement, monitoring and accuracy: • Marposs 3D radio probe • Laser tool presetter • Thermal compensation on X, Y and Z axes • Optical scales on X, Y and Z axes • Tool life monitoring • Extended work coordinate system (48 additional offsets) Gusdpfx Anozp Hnde Eji • Artificial vision system with 2 cameras • Clamping enhancement: • Pressure-controlled hydraulic clamping • Included auxiliary equipment: • Bonfiglio MROTOS 8555 4 E LRSA industrial parts washer, robot integrated • Automator ADP5090 dot peen marking system with AC500 controller, robot integrated: • Marking area: 50 × 90 mm • Pneumatic marking head • Connectivity: Ethernet / USB / RS232 / RS485 • Touch-screen AC500 controller • Marking speed up to 10 characters/second • Additional Machine Information: • The machine has recently been fully serviced/revised by the manufacturer. • The spindle was also included in the recent manufacturer service. • The machine has always been used for machining aluminium. • The machine is currently not in production due to a change in the type of parts being manufactured.

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, Guodpeh S H T Uefx An Eei hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: good (used), functionality: fully functional, machine/vehicle number: WDF63960313440540, mileage: 177,767 km, power: 110 kW (149.56 HP), first registration: 05/2008, fuel type: diesel, empty load weight: 1,825 kg, maximum load weight: 1,115 kg, overall weight: 2,940 kg, next inspection (TÜV): 10/2028, fuel: diesel, color: white, gearing type: automatic, number of gears: 6, emission class: euro4, number of seats: 6, total length: 5,093 mm, total width: 1,906 mm, total height: 1,973 mm, Equipment: ABS, EBS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, non-smoking vehicle, parking heater, power assisted steering, power mirror, seat heater, sliding door, soot filter, trailer coupling, truck registration, Workshop equipment - Sortimo 9147 Paint color Arctic White MB 9147 AC7 Axle ratio I = 3.273 BB3 Electronic Stability Program (ESP®) CL4 Multifunction steering wheel with trip computer E28 Additional battery for retrofitted accessories ED5 Parameterizable special module EE8 Battery 12V 100Ah EH3 Universal preparation for networked mobile phone EL8 Two-way front speakers EN4 COMAND with TMC interface ES1 12V socket in the passenger compartment ES6 AUX socket EZ8 PARKTRONIC F46 Headlight cleaning system F61 Interior mirror F66 Lockable glove compartment F68 Heated and electrically adjustable exterior mirrors FF2 Center console with 1-DIN slot FJ1 Folding cover for storage compartment FKA Box van FZ8 Comfort opening and closing with IR remote control FZ9 Two additional main keys G40 Automatic transmission H00 Warm/cold air duct to the passenger compartment H12 Auxiliary hot water heater H16 Seat heating for driver H21 Heat-insulating glass all around with band filter on the windshield HF2 Pollen filter HH9 Semi-automatic Tempmatic climate control system HI1 Climate zone 1 (cold/comfort) HY1 Remote control for auxiliary hot water heater HZ0 Auxiliary heater, electric IL1 Domestic (Germany) IN2 Wheelbase 3200 mm, long overhang J65 Outside temperature display JA1 Warning light for windshield washer fluid level JA5 Light and rain sensor JK3 Instrument cluster with pixel matrix display KA1 Particulate filter L Left-hand drive L66 Load compartment lighting LB9 Exit lights LD0 Roof control unit with 2 reading lights M49 Generator 14V/180A MF4 Emission class Euro 4 N1 Gr.III/N2 MP3 Engine OM 646 DE 22 LA 110 kW (150 HP) 3800/min MS1 Cruise control Q22 Trailer coupling, fixed ball head Godpfx Ae Agvkgen Ejui QA4 Trailer load 2500 kg RD9 Tire specification, no specific brand required RF1 Tire brand Continental (10) RG1 Tire size 205/65 R16 RM1 M + S tires RR6 Spare wheel with jack RS3 Steel wheels 6.5 J x 16 SB1 Driver's seat, comfort SE5 Lumbar support for driver's seat SH4 Passenger double seat bench, comfort SZ4 Storage pockets on the backrests of the front individual seats T19 Sliding door, left T70 Child lock on doors in the passenger compartment U65 Seating in the passenger compartment, 3-seat bench, 1st row U73 Armrests for seating in the passenger compartment V30 Side wall interior paneling in the cargo/passenger compartment V43 Wooden floor V85 Smoker's package VD1 Headliner, standard, pillar C-D VT0 Fabric Mateo anthracite W16 Window, front left, fixed in side wall/sliding door W17 Window, front right, fixed in side wall/sliding door W65 Rear tailgate W70 Tinted glazing in the rear, black glass X30 Vehicle registration certificate part 2 XA2 Weight variant 2.940 kg Y10 First-aid kit Y44 Warning triangle YF7 Fire extinguisher 1 kg Z41 Approval as a truck ZC5 Sales designation 0 ZK4 Mixto

Condition: used, empty load weight: 5,010 kg, maximum load weight: 15,990 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, 20 x lashing eyes, 10 x stake pockets, loading height: 900 mm, , Vehicle is sold on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gsds Aidnvepfx An Ejui

Condition: used, first registration: 01/2023, overall weight: 21,000 kg, empty load weight: 4,800 kg, color: other, axle configuration: 2 axles, gearing type: other, emission class: none, maximum load weight: 16,200 kg, suspension: air, loading space length: 7,200 mm, tire size: 235/75R17,5 143J, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 20 lashing points, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and the rear slope, loading ramps adjustable laterally, ramps with spring-assisted lifting mechanism, 8 rung pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators. – Subject to printing errors, errors and changes – Sample images – More data at: ! Gedpfx Anj Aidn Ds Eoui

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,750 mm, travel distance Y-axis: 1,870 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 3.750 mm Y-axis: 1.870 mm Z-axis: 700 mm CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Godpfx Ae Ahfn Ron Eoui Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.100 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm Godpsyzd I Usfx An Eoui -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting, rotating beacon = price: ¤ 800, widening to 3 m = price: ¤ 100 hydraul. Surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1,100 ¤, hydraulic 1-piece ramps 500 ¤, also with 8.10 m loading area length + widening in stock, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedpe Aihi Hofx An Eoui

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Gjdpfx Ae Aihgven Esui

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length, total approx.: 8,800 mm, lowbed approx.: 6,600 mm long, loading height, loaded approx.: 890 mm, 24 x lashing eyes, each 10 t, 12 x stake pockets in the outer frame, access ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramp and rear slope, access ramps adjustable laterally, wooden floor, 68 mm thick, storage box with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, incl. axle load indicators, surcharge for: warning signs with lighting and rotating beacon, widening to 3 m with wooden supports, price: 500 €, hydraulic adjustment of the ramps = price: 1,000 €, excavator arm trough = price: 1,000 € net, -- printing and typographical errors, errors and changes excepted, sample images --, more data under: !, More Details: ! Guodpe Aihf Ujfx An Eei