Used Pocket Hole for sale (5,205)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106840-11, overall weight: 35,000 kg, The drilling process of the deep hole drilling machine uses single-lip drilling. The BW250-T is a deep hole drilling and milling center with two separate spindles for deep hole drilling and milling operations. The machining units are equipped with an additional common travel axis, allowing even smaller workpieces to be machined from four sides on the clamping table without resetting. Drilling and Milling Unit Information: - Number of spindles: 1 drilling spindle and 1 milling spindle - Spindle speed infinitely variable: 0 - 5000 rpm - Spindle drive power: 17 kW at 100% duty cycle S1 operation - Torque: 260 Nm at 100% S1 operation - Max. drilling depth: 1500 mm (in one pass without repositioning) - Drilling diameter: 4 - 40 mm based on ST 60 Travel Paths: - X-axis travel: 2500 mm - Y-axis travel: 1500 mm - Z-axis travel: 850 mm - V-axis travel: 1000 mm Feed rates: - X-axis speed: 10000 mm/min - Y-axis speed: 10000 mm/min - Z-axis speed: 6000 mm/min Swivel Axis Setup for Drilling and Milling Unit: - The drilling and milling unit has a horizontal swivel range of -25° / +15° - 3x steady rests Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 2400 liters - 1x hinge belt chip conveyor - 1x hydraulic power unit and pneumatic unit/equipment - 1x central lubrication - 1x low-pressure pump: Pump output: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filter output: 175 l/min For operations in: steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x oil mist extraction, Extraction capacity: 2400 m³/h Tool magazine for conventional tools consisting of: - Tool change magazine with intermediate gripper - Tool holder HSK 63 - Max. permitted tool diameter: 127 mm - Max. permitted tool length: 400 mm - Tool storage spaces: 40 Clamping table with X-axis and NC rotary table: - Length/width: 1600 x 2000 mm - Useful load (centered): 15 t - Swing diameter for workpieces: 2800 mm Measuring Equipment - Tool breakage monitoring and length measurement of the BCM tools with automatic compensation in the control system Electrical Equipment Information: - 1x CNC control TNC 640 Failsafe Heidenhain - 1x drilling process monitoring - 1x remote maintenance - 1x dynamic collision monitoring - 1x handheld control device Connection Data: - Operating voltage: 3AC 400V ±10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 65 kW Bwedjxmh Eropfx Aaqow

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: JM325D, HGH start hole EDM machine, fully functional incl. documentation for sale. Bsdpoxnba Eefx Aaqsww

Condition: excellent (used), functionality: fully functional, operating hours: 25,121 h, Equipment: CE marking, TRUMATIC TC 1000 R Including original software and 13 tool cassettes Very good condition: the machine has only logged 25,121 machine hours to date Punching - Bending - Tapping (M5, M6) Punching force 165 kN Sheet thickness up to 6.4 mm Sheet length 2,070 mm Bwjdpfx Aajwbwnusqow Sheet width 1,250 mm Max. stroke rate 600 rpm (punching E = 1 mm)

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Bwedpfjxc Hi Ujx Aaqow Drilling unit: swiveling

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank -Pumps Bwedpfx Ajd Ri H Eeaqsw -loading equipment -Tailstock

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Bedjltrmuspfx Aaqoww Weight: approx. 200 kg Good condition

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Specifications: - Three motors - Wide machine customization options - Operator safety system - Profile supports and cutters included Technical specifications: - 750 W motor - 31,000 rpm - Voltage 220 V 50 Hz - Operating pressure 6-8 bar - Weight 130 kg - Dimensions / packaging: 600 x 1200 x 1800 h mm Bwedpfoxmip Sox Aaqsw

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 2,000 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 2.000 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Bwsdpfxoxrnche Aaqjw Contact us for more details.

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Bwedsv N Hrtjpfx Aaqew Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Offered is a combination of Lamello Patchmaker and Lamello resin pocket cutter as shown in the photos. The tools were used in production until recently and are ready for operation. For occupational safety, the resin pocket cutter requires a new cutter guard. Bjdpfjw Ni Diox Aaqjww The Lamello tools are used and in condition appropriate for their age. Warranty is therefore excluded.

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Bodpj Dcz Djfx Aaqsww

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Bedpfxsxgnhaj Aaqjww Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Required space: 300 x 170 x 680 mm Weight: 32kg Bedpfxohtq Hfo Aaqoww

Condition: excellent (used), Year of construction: 2009, operating hours: 20,709 h, 2 spindles Bwjdpfxjww Ihqe Aaqow Drilling data: Spindle 1 (4 kW) 5-18 mm Spindle 2 (1.2 kW) 1-4 mm Spindle speed: Spindle 1: 600 - 6,000 rpm Spindle 2: 2,000 - 24,000 rpm Drilling depth approx. 1,200 mm (with Ø8mm and use of 3 steadies) Rapid traverse 15,000 mm/min Carriage stroke 1,800 mm Machine weight: 7,500 kg

Condition: good (used), Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 300 kg, table width: 400 mm, overall weight: 870 kg, table length: 300 mm, Electrode diameter 0.1 - 3 mm Electrodes available in brass, copper, or carbide Suitable for starter hole drilling in steel, aluminum, hard metal for wire EDM or for precise, deep, narrow boreholes Manual or CNC-controlled programming cycle Bwodpfx Aaow Dqdnoqsw Approach cycles Includes pump and collection tank on castors Includes drill chuck and seal for 1.5 mm electrodes Machine can be inspected or tested under power at any time.

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm Bwodpfx Aaslnkc Usqew - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies

Year of construction: 2009, condition: ready for operation (used), A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Bwedpfxoxd Avge Aaqow

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: Bedpfxouihvzs Aaqoww 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 1987, Scheer DB5 Line Boring Machine – used, year of manufacture 1987 For sale is a Scheer DB5 line boring machine. The machine is pre-owned but in working condition and ready for immediate use. Technical data: Bwsdpfx Aaexc Twljqjw • Year of manufacture: 1987 • Power supply: 380 V • Power: 2.2 kW • 21 spindles, 32 mm pitch • Stop ruler included • Various dowel drills included • Portal clearance: 1056 mm Condition: • Used, age-related with normal signs of wear • Machine is running and can be inspected and tested on site by appointment • Note: A few pneumatic hoses should be replaced (currently slight hissing noise). Additionally, a fuse needs to be replaced as it trips when switched on (currently bypassed as a temporary fix).

Year of construction: 1982, condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min - throat 760 mm - Installation height 215 mm - working height 1150 mm Bedpfshkr Daox Aaqsww - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces div. hole punches + dies

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: Bjdspuy H Dopfx Aaqeww - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm Bedpfx Aoit T Hyoaqeww - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device Bodergptiepfx Aaqeww - foot switch; - Emergency stop button - Various punches + dies in separate workbench

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm Bwjdjrll I Ujpfx Aaqew - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm or up to 28 mm Ø in steel at 10 mm Bjdpswuqprofx Aaqoww or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: - stop table with adjustable stops - electric foot switch - machine base - various punches with die