Used Pocket Hole for sale (4,236)

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg Cjdpfxjz Epnvo Akteri • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details turning diameter 570 mm turning length 1000 mm control MANUALplus 620 swing diameter over face slide 340 mm spindle bore 93 mm spindle turning speed range 1 - 3000 U/min transmission ratio 2 rapid power traverse in X-and Z direction 7 / 10 m/min max. workpiece weight -without tailstock 500 kg max. workpiece weight between centres 1000 kg workpiece weight in steadies max. 1250 kg main drive motor (100/60% ED) 20 / 25 kW Dimensions (LxWxH) 2,94 x 2,20 x 1,96 m max. torque on the spindle ca. 1400 Nm weight of the machine ca. 3,4 t Additional information * HEIDENHAIN MANUALplus 620 control system - Control system expansion for ICP and DIN programs, incl. thread repair * Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm, mounted in front of the turning center (limits achievable turning diameter and tailstock operations; reduces turning length) * 2-speed planetary gearbox, automatic shifting * Main spindle holding brake, incl. software upgrade for bolt hole circle and milling cycle options - C-axis-style functionality for pocket milling, with drilling, milling, and engraving cycles and free ICP input * Reinforced coolant pump * RÖHM 3-jaw chuck, 315 mm, with one set of hard jaws * Steady rest * Approx. 20 fixed tool holders Crsdoz Ixz Dspfx Aktsi

Condition: good (used), Year of construction: 2012, Ref. -No.: 10680 Manufacturer: TOYODA Type: FH 1250 SX Year of construction: 2012 Type of control: CNC Control: FANUC Series 310i-A Storage location: Halberstadt Country of origin: Japan Serial no.: NS 22XX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Table Dimensions (Lengthxwidth): 1250 x 1250 mm Table Load: 2500 (zu bestätigen) kg Tool Taper: SK 50 Numbers Of Tools In Magazin: 128 (zu bestätigen) Turning Speeds: 20 - 6000 RPM Dimensions Of The Machine Ca.: 10500 x 6300 x 5000 (Platzbedarf) mm m Numbers Of Pallets: 2 Operating hours: 1833 H Further information: TOYODA FH 1250 SX – 1,833 operating hours Horizontal 4-axis machining centre with 2 pallets 1,250 x 1,250 mm and large tool magazine. Control: FANUC Series 310i-A Working range / travels - X-axis: 2,200 mm - Y-axis: 1,600 mm - Z-axis: 1,850 mm Crjdpfx As Ahmwksktji - 4th axis: rotary table (B-axis) - Feed X/Y/Z: 1 – 2,100 mm/min (stated as rapid traverse by seller, to be confirmed) Pallets / table - 2 pallets with automatic pallet changer - Pallet size: 1,250 x 1,250 mm (tapped holes, standard version) - Max. pallet swing diameter: Ø 1,600 mm - Max. load fixture + workpiece: 2,500 kg (according to manual, to be confirmed) Spindle - Tool taper: SK 50 - Speed: 20 – 6,000 rpm Tool system - Chain magazine with 128 pockets (120 stated elsewhere, to be confirmed) - Automatic tool changer - Tool length measurement Equipment - Chip conveyor / coolant system KNOLL - Hydraulic unit - Electronic handwheel - Set-up station with pallet station - Tooling manual (JTEKT) available Floor space: approx. 10.5 x 6.3 x 5.0 m (L x W x H) Data according to seller's description, subject to technical changes and errors.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Cjdpfx Akjwz Eu Njtsri Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 2,300 kg, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering a new roll-off platform for sale, manufactured in our own production facility. The platform features the following: - Manufactured according to DIN standards - 50mm diameter mounting bracket - Hook height 1570mm - 5mm checkered steel floor / 4mm front wall thickness - Robust hook housing with surrounding steel plates - IPN 180 longitudinal beam / reinforced - External rollers, greaseable and replaceable - Primed, painted in RAL 7016 / anthracite - C-locking mechanism according to DIN - 5 pairs of recessed lashing points with a tensile force of 2.5t each - Lateral perforated rails with 30mm hole spacing - 6x heavy-duty and lockable inserts to compensate for track differences - Tracks recessed by 120mm (125mm ground clearance) - Recessed tracks, each approximately 4780mm long and 708mm wide Crjdpozrdc Dsfx Aktji - 2x lockable steel pockets on the front - 2x lashing rings with 5.3t tensile force each on the inside of the front wall - 2x lashing rings with 5.3t tensile force embedded in the ramp - 2x warning markings according to §32 (1) StVO & DIN - Including type plate & container inspection according to DGUV rule 114-010 (formerly BGR) - Immediately available Also available with a usable platform length of 6.5m and 5.5m. Nationwide delivery is possible for an additional charge! If you are interested in other roll-off container products, we would be happy to receive your inquiry!

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A Crjdper Hbf Esfx Aktji About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: Crodsr Hbf Topfx Aktsi >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Credox U Eh Nopfx Aktsi Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Condition: new, Year of construction: 2024, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clamping for fixtures - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 117 (57|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Credpfor Nbzxox Aktsi Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: ready for operation (used), An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Crodpfx Asxnbruektei

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system Csdpev Rppkefx Aktsri >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: Cjdpfx Akexaaipotori - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Credpfx Akortrx Rjtei Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). Cjdpfx Aoz Ad Dcoktori 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t Credpsu Idmvjfx Aktsi dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: good (used), Year of construction: 2009, functionality: unexamined, overall weight: 1,750 kg, total length: 3,000 mm, total width: 2,000 mm, total height: 1,900 mm, 1 x WP Haton 4-pocket dough divider. This is an industrial volumetric dough divider engineered to split massive batches of dough into accurate individual portions. Supplied with electrical cabinet, extensive spare parts kit, user manual and electrical drawings. Manufacturer - WP Haton BV. Model - B700. Serial number - HB010319. Date of manufacture - 2009 (Refurbished by WP Haton bv in 2016). Codpfx Akj Ahqz Sotjri Production capacity - 2,000 to 6,000 pieces / hour (500 to 1500 strokes / hour). Dough portion size range - 200g to 1000g (with fresh dough). Suitable dough types - Wheat, rye, multigrain, whole wheat, stiff pizza doughs, and soft French doughs. Electrical rating - 400 V / 50 hz / 3 phase. Dough divider overall dimensions - 3000mm wide (2000mm wide without either exit conveyor fitted) x 1800mm wide x 1900mm high (approximately). Electrical cabinet overall dimensions - 1100mm wide x 500mm deep x 1800mm high. Condition - Removed from factory fully working, needs new electrical cabling to/from electrical cabinet.

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm Credpfx Akozz Ei Rotei LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Credpfjgb Ec Hsx Aktei Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: used, maximum load weight: 78,380 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 06/2023, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt of the equipment, complete equipment list available upon request. Equipment: * 2-inch kingpin * 12 t Broshuis SL axles * Extendable width extensions * 4 pairs of lashing points on the central beam, 10,000 daN * 1 pair in the fixed section in front of the telescoping section * 3 pairs behind the telescoping section * 9 pairs of lashing points in the outer frame, 10,000 daN * Holes in the outer frame for attaching lashing straps * Jost 2-speed geared support winch * 4 extendable, illuminated width extension panels * 3 plug-in side panels on the gooseneck (length approx. 2,400 mm) * Rear corner posts, plug-in/removable * 4 sets of shims with holders under the loading platform at the support legs Csdpfx Aez Ifk Eektsri * 1 pair of lashing points in the outer frame of the gooseneck, 10,000 daN * 3 pairs of lashing points in the outer frame of the gooseneck, 5,000 daN * NATO socket - NATO spiral cable - 2 x 7-pole electrical system * 1 x 7-pole EBS - 1 socket at the front and rear for auxiliary steering * 1 storage box on the gooseneck, spanning the entire width, with angled corners (45°) * Opening from above - doors in the corners can be locked (not continuous to the storage box in the middle) * 6 sets of plug-in uprights, approx. 1,200 mm high, incl. holder on the gooseneck * WADER container pockets for 1 x 20 ft and 1 x 40 ft - Brake connections, red/yellow - EBS WABCO * Rear support, telescoping * 2 LED reversing lights at the rear * LED lighting (DK round) * 1 LED rotating beacon * 8 pairs of upright pockets in the outer frame of the loading platform * 3 pairs of upright pockets in the outer frame of the gooseneck * Contour marking, yellow on the sides / red at the rear * Adjustable attachment rails for loading ramps * 3 LED flashing beacons at the rear of the vehicle * RAL 3002 carmine red * 2 ECE plates at the rear

Condition: used, empty load weight: 7,180 kg, maximum load weight: 23,820 kg, overall weight: 31,000 kg, first registration: 05/2024, loading space length: 7,500 mm, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 18 tie-down points, 12 pocket holes for securing cargo, 2 ramps, each 3,110 mm long x 760 mm wide, hydraulic, one-piece ramps, loading height: 890 mm, including axle load indicators, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, also available with K80 towing eye!, , -- Subject to printing errors, errors and changes, sample images --, More data can be found at: !, More Details: ! Crodo Ah Sxiepfx Aktei

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Credpfx Ajztyxdektei Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Csdpfjx Ehg Tox Aktsri

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Crodpozlmkwsfx Aktei Without connection cable to the tractor unit Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor Crsdpfxjrgzv No Aktei * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Crodpfx Akjw U H Sbetoi Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi