Used Pole Lathe for sale (6,611)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz Dsdpfx Aijwz Rifj Ejwd - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Location: in stock at 54634 Bitburg - immediately available - Dwedsw Hl Adspfx Ai Esd

Condition: good (used), Year of construction: 2008, turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, total height: 6,700 mm, total width: 6,300 mm, total length: 9,300 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, table diameter: 2,000 mm, travel distance X-axis: 1,835 mm, travel distance Y-axis: 1,000 mm, workpiece diameter (max.): 2,400 mm, overall weight: 48,000 kg, Equipment: documentation/manual, X Stroke 1835 mm Z Stroke 1000 mm Table load 20 Ton Ram size 230 x 230 mm   Stroke crossrail 800 mm  Stroke crossrail in 5 steps each 200 mm Live tools 2000 Rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360.000   Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Max. turning Ø: 2400mm Table Ø: 2000mm ATC / revolver: 18 Speeds / ranges: 200Rpm Power: 48kW Djdpfx Aijv R Di Sj Eswd Maximum turning height:1500mm C-Axis: 360000° Length: 9300mm Width: 6300mm Height: 6700mm Weight: 48000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm Dedpfsw Rkt Isx Ai Eewd centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: used, total length: 3,700 mm, total width: 1,650 mm, total height: 190 mm, Year of manufacture: 2001 Colour: White Empty weight: 3.300 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: 291/01 - Drive system: Teach-in - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 Dodpfx Aozhuvgoi Eswd - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Bed width [mm]: 365 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Quick-change tool post, Fixed steady, Digital readout, Three-jaw chuck - Transport dimensions: 3700mm x 1650mm x 190mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, functionality: fully functional, JESSEY CHAMPION CP 1540 VS Guide and Lead Screw Lathe Manufacturer: Jessey Type: Champion CP 1540 VS Year of manufacture: 2015 Condition: used Dedpfx Aijzminuj Ejwd Scope of supply: - Coolant system - Machine light - Machine feet - Documentation - Chuck jaws - Digital display - MultiFix B Further information available upon request.

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Dwedpey Tyyqofx Ai Eed Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Dsdpfxsz At Abe Ai Eswd Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg Dwodpfx Ajzzlg Asi Ejd - Documentation available: Yes - Drive system: Conventional - Centre height [mm]: 225 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: R0285, spindle bore: 70 mm, total length: 3,350 mm, total width: 1,550 mm, type of input current: three-phase, spindle motor power: 15 W, overall weight: 4,000 kg, workpiece diameter between centers: 290 mm, workpiece length between centers: 1,500 mm, CNC Lathe MONFORTS KNC 5 – 1999 For sale, a MONFORTS KNC 5 CNC lathe, year 1999, in very good overall condition. Ideal for precision turning operations, the manufacture of individual parts, as well as small and medium production runs. Technical specifications Brand: MONFORTS Model: KNC 5 Year of manufacture: 1999 Condition: Very good Color: White Weight: 3,300 kg Motor power: 15 kW Numerical control: Monforts Control System MTC K Programming: By teach-in Documentation: Available CE marking: Yes Machining capabilities Distance between centers: 1,500 mm Center height: 250 mm Maximum turning diameter above the bed: 500 mm Maximum turning diameter above the cross slide: 290 mm Spindle bore: 70 mm Spindle speed: 2 to 2,800 rpm Included equipment 3-jaw chuck FORKARDT F+250 Collet chuck, see photo Soft jaws and reversible jaws, see photo Technical documentation Dimensions and transport Length: 3,350 mm Width: 1,550 mm Height: 1,800 mm Total weight: 3,300 kg Additional information Machine in very good condition Price shown excludes VAT – VAT is recoverable for eligible professionals, subject to applicable conditions. Machine can be viewed by appointment in Sprimont, Belgium. Dwsdpfx Aj Agvttoi Eed For any further information or to arrange a visit:

Condition: used, Year of construction: 2015, operating hours: 21,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Dodpfx Aisxdbkvj Ejwd

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module Djdpfx Aek Dpxlsi Eewd 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2027, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation Dedpfod Ivynjx Ai Ejwd -Side support -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Dsdsvbh N Rjpfx Ai Eswd Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW Dsdpevb Hlwjfx Ai Eswd total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: good (used), Year of construction: 2005, CITIZEN K12 CNC lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extension length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15000 rpm Max. machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Spindle speed, counter spindle: 10000 rpm Tool attachment, number of tools: 8 Speed of the driven tools: 6000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1950 kg SCOPE OF OFFER Among other things: (list not exhaustive) Citizen K12 CNC lathe Chip tray Transformer Complete operating documentation Dsdpovrz H Rsfx Ai Eewd Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T Dwedpfx Aieucgxue Ejd turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l weight - pallet system 5500 kg

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm Dsdpfju Ixw Asx Ai Eewd centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm Dodpfsu Ixzbjx Ai Eswd spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm Dsdpfx Aisu Ix Arj Eewd turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc Dwedeu Ix D Aopfx Ai Eod *

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 Dwjdpfxeu Ix Rpj Ai Ejd tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Dsdpfx Aju S Rivji Eewd Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information

Condition: used, Year of construction: 1975, Technical details: Dwjdpfxsv A Sqho Ai Eod turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! Dwedoz S Euaepfx Ai Eed TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display