Used Posmill C 1050 for sale (55,051)

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing workshops, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam; edge segments can be switched on and off. Segment width of the pressure beam: 35 mm Contact roller can be pneumatically adjusted, low wear thanks to grooved steel roller Abrasive grain compensation Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed, frequency controlled from 2 to 18 m/s Feed belt can be continuously adjusted via frequency inverter from 2.5 to 13 m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the exit Constant working height of 900 mm by adjusting the machine upper section, allowing integration into sanding lines Feed belt still very grippy and in excellent condition Maximum sanding width approx. 1090 mm Workpiece height approx. 3 to 150 mm Common abrasive belt size: 1120 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable outfeed table Prepared for vacuum blower. The conveyor is perforated and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to the extraction system. Extraction connections: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam engagement points front and rear, edge segments, belt blast nozzle, optional vacuum blower, pneumatic setting of the calibration roller. Nwsdpfx Aoym Du Rsg Ijc CE mark Operating manual without the power cable shown Original paint, only partial touch-ups Approx. 592 operating hours, i.e., around 40 minutes per week. Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg. The machine can be demonstrated on our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: Njdpfx Agjymn Ego Ijwc - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone. Njdjymnv Espfx Ag Ijwc

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display Nsdpoymm Erofx Ag Iewc - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), controller manufacturer: HAITIAN, This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Aditional information Nodpex D Rbqofx Ag Ijwc • Haitian handling system • Protective enclosure • Conveyor belt for parts storage

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Nedjyml Niepfx Ag Iswc Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: excellent (used), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for continuous professional operation. For sale is a professional climate test chamber from Weiss Technik, model WK 5/55-120, manufactured in 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range from 10–95% RH, the chamber covers a broad range of testing scenarios. The spacious test chamber of approximately 5 m³ allows for testing of larger components or assemblies. Technical highlights: - Temperature range: -55°C to +120°C - Climatic range: 10–95% RH - Heating/cooling rate approx. 1.5 K/min - Requires water cooling Technical data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume - Test space volume: approx. 5 m³ - External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm - Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55 °C to +120 °C - Heating/cooling rate: approx. 1.5 K/min - Climatic range: 10 – 95 % RH - Dew point range: +4 °C to +85 °C Electrical data: - Mains connection: 3/N/PE AC 400V ±10% 50Hz - Rated power: approx. 47 kW (depending on configuration) - Rated current: 71 A - Customer-side fuse: 63 A Cooling water: Nwsdpsymdc Iefx Ag Ijc - Water cooling required - Maximum cooling water consumption: approx. 7 m³/h - Inlet temperature: approx. 20 °C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: - Weiss Technik climate test chamber WK 5/55-120 - Control system - Operating manual (German) - Nameplate & documentation Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data! All information provided without liability.)

Condition: excellent (used), Binder Model: MKF 720 E3.1 Temperature and Climate Test Chamber Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% r.h. to 98% r.h. Nwedsymcqdjpfx Ag Ijc The MKF climate test chamber is a specially developed environmental simulation chamber for industrial material testing and environmental simulation. It offers unmatched performance, significantly exceeding the capabilities of conventional heating chambers. It is suitable for all applications required in material testing, aging, and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm, Height: 2005 mm, Depth: 1230 mm Internal dimensions: Width: 1200 mm, Height: 1020 mm, Depth: 600 mm Interior volume: 734 liters Net weight (empty): 590 kg Max. total load: 160 kg Max. load per shelf: 40 kg Performance Data, Temperature: Temperature range: -40°C to +180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Performance Data, Climate: Temperature range: 10...95°C Humidity range: 10...98% r.h. Temporal temperature deviation depending on setpoint: 0.2...1.5 ± K Max. heat compensation: 1000 W Electrical Data: Nominal voltage: 400V 3N~ ±10% 50Hz Nominal power: 11 kW, 19.2 A Refrigerant: R404A, 5 kg Important notice: 'The table shown in the photos is not included in the sale.' Buyer safety information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with regulation-compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and error!) Further questions? Feel free to contact us by phone.

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection Nwedpsyma Nwjfx Ag Ioc External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm Nsdpfjx Dndcjx Ag Iswc z-travel 500 mm

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Njdpfxeym Nbvo Ag Iowc Machines can be inspected under power by appointment.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data is based on the original order confirmation. The seller cannot guarantee that it matches the current condition. Nwjdjym Uu Uopfx Ag Isc TECHNICAL DETAILS Load capacity: 12,000 kg at load center 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Lowered height: 4,895 mm Extended height: 8,100 mm Mast tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm STEINWEG Stone Clamp Type HG1T-6000S TECHNICAL DETAILS Clamping width: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Load capacity: 6,000 kg Double clamping bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in stable and clean welded construction Splayed clamping arms with rotatable mounting With hydraulic cylinders, required valves, lines and fittings Including oil pressure gauge and connecting hoses to the rotator Additionally: one pressure gauge mounted 180° opposite the standard gauge Load arm & extension TECHNICAL DETAILS Extension: 1.6–2.1 m Load capacity: 8,000 kg at outreach of 1.6–2.1 m EQUIPMENT 1 telescopic forklift jib, double-beam design, with infinite rotator and pendulum suspension Including connecting hoses to the forklift 1 hydraulic extension with extension cylinder 1 pair of stabilizers (2) for pendulum movement compensation Integrated sideshift with sliding guides, sideshift range: 250 mm Wireless Pressure Monitoring (Clamp Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30 °C to +85 °C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC System: Electronic control with 7" touchscreen Driver’s seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable sideways ADDITIONAL EQUIPMENT Front mud guards Rear mud guards External mirrors on high-mounted fenders Turbo II heavy-duty air filter Additional hydraulic function Quick couplings on carriage Accumulator/shock absorber 60 bar / 2 L in lift hydraulics Hydraulic oil tank pre-heating Additional LED headlights, 2 × on mast Reverse alarm LED beacon Electric cables above the mast Power connection 400 V, 3-phase Blue Spot lighting front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with speed boost EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/Analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Adjustable A4 writing surface LED reading lamp Diesel auxiliary heater + engine water heater Sun visor (roof/front) Panoramic rearview mirror Installation of attachments from other manufacturers Central lubrication system, basic version with 14 lube points

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,824 h, travel distance X-axis: 2,715 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 224 mm, overall weight: 1,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 3,000 W, number of axes: 3, This 3-axis FomIndustrie ADIR C was manufactured in 2018. It features an X-axis travel of 2715 mm, Y-axis travel of 355 mm, and Z-axis travel of 224 mm. The machine is equipped with a powerful electrospindle with a speed range of 1000 – 12,000 rpm and a worktable height of 850 mm. If you are looking to get high-quality milling capabilities, consider the FomIndustrie ADIR C vertical machining centre we have for sale. Contact us for further details. • Control: PC-based system with FOMCAM software • Axis speeds: X 25 m/min, Y 13 m/min, Z 11 m/min • Distance between stops: 2600 mm • Milling capacity: X 2675 mm, Y 250 mm, Z 120 mm • Worktable: rotation 0° / 90° / 180° (pneumatic), height 850 mm • Spindle: Electrospindle, taper ISO 30 (DIN 69871) • Tooling: max tool length 130 mm, max tool diameter 20 mm • Tool holder positions: 6 (manual tool change, ISO 30) Njdpoymzixefx Ag Iowc • Pneumatics: 4 pneumatic clamps, operating pressure 7 bar, air consumption 24 NL/cycle • Electrical: supply voltage 400 V, frequency 50 Hz, installed total power 3.5 kW • Hours: machine 1,824 h; electrospindle 560 h Technical Specification Taper Size ISO 30

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Nedpfx Agjykqwts Iewc Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high-pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measuring system Collision protection system Water treatment system TCI HIDROSYSTEM 2.0 Sludge removal system Lantek Expert 2D software with automatic nesting feature

Condition: good (used), Year of construction: 2009, Industrial robot Manufacturer: Kuka Model: KR16 C Ceiling Year of manufacture: 2009 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2GHz Operating system: WinXP Software version: V5.6.8 Kuka Teach pendant: KCP2ed05 Kuka Connection cables: 7m/15m 24226ä Nedpfx Ajq Rc S Asg Iswc Several robots available!

Condition: good (used), Year of construction: 2016, Industrial robot Manufacturer: Kuka Nodpfx Ajq Rc Uwsg Iewc Model: KR16-2 C Ceiling Year of manufacture: 2016 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka control system KRC4 Weight: 145 kg Software version: V8.3.40 Interface: X11 Kuka touch panel Kuka connection cables 24226ä

Condition: good (used), Year of construction: 2007, Industrial robot Manufacturer: Kuka Model: KR16 C Ceiling Year of manufacture: 2007 Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Controller KRC2ed05 Nwedpfxstpf Ite Ag Isc Weight: 185 kg Processor: 2GHz Operating system: WinXP Software version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka Connection Cables 7m/15m 24226ä

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Nedpfx Aoydql Dog Ijwc

Condition: good (used), Year of construction: 2015, machine/vehicle number: C10428528, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 1,800 mm, total length: 7,000 mm, total width: 2,200 mm, overall weight: 3,000 kg, Equipment: documentation/manual, COSEN C-320 NC Automatic Metal Band Saw - Saw blade dimensions: 4240 x 34 mm - Cutting speed: 15 - 100 m/min Cutting capacities: - Round: 320 mm - Square: 320 x 320 mm - Rectangular: 380 x 320 mm - Incl. roller conveyor - Roller conveyor length: 3500 mm Njdpfx Ajym Sa Uog Iswc - Roller conveyor width: approx. 450 mm Attention: The item must be collected on a fixed date between 21.04. and 30.04.2026, to be agreed in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2013, machine/vehicle number: C1022629, functionality: fully functional, power: 3.75 kW (5.10 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 1,800 mm, total length: 7,000 mm, total width: 2,200 mm, overall weight: 3,000 kg, Equipment: documentation/manual, COSEN C-320 NC Automatic Metal Bandsaw - Saw blade dimensions: 4240 x 34 mm - Cutting speed: 15 - 100 m/min Cutting capacities: - Round: 320 mm - Square: 320 x 320 mm - Rectangular: 380 x 320 mm - Includes roller conveyor - Roller conveyor length: 3500 mm - Roller conveyor width: approx. 450 mm Nwjdeym R T Topfx Ag Isc - Includes matching workshop cabinet with suitable accessories Note: The item must be collected between 21.04. and 30.04.2026 on a specific date to be agreed. FCA D-96257 Marktgraitz – loaded onto truck

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Refurbished in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Nwjdpfx Agowp E Rgo Ijc Spindle speed: 4,200 rpm Machine weight: approx. 2,500 kg

Year of construction: 2018, condition: good (used), Fully automatic L-sealer / Fully automatic side sealing machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operator side: Left in the running direction Nsdstzcd Sjpfx Ag Iewc Clear passage width: approx. 600 mm Clear passage height: approx. 190 mm Sealing length: approx. 900 mm Working height / belt height in/outfeed: approx. 860 mm +100 Output: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 Ph + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 4000 mm Nedpfoxcbhxox Ag Iewc z-travel 1200 mm workpiece weight 3500 kg

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min Nedpfx Aswa Dx Rog Iowc total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: S18092, The DMK 20 C Table Cutter is the ideal table cutter for small to medium-sized meat processing businesses, premium gastronomy, as well as large-scale kitchens and catering operations, thanks to its compact, robust, and precise design. The well-thought-out construction provides the user with almost unlimited versatility in all application areas. The machine is equipped with two independently operable, powerful motors, offering a wide range of control options. The optionally available robust, mobile base frame ensures the desired mobility. The machine recently underwent a major inspection at the manufacturer DMS in Saarbrücken. The net weight of 260 kg speaks for itself – a true professional-grade machine! The machine is available from week 8. You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Tested & fully operational - or your money back • Flexible shipping or self-collection options • Competent advice – before and after purchase • Provision of user manuals, wiring diagrams & spare parts • DGUV V3 inspection Machine specifications: • Completely stainless steel • Solid cast stainless steel bowl (bowl capacity 20L) • High-precision, maintenance-free cutting unit • Stainless steel knife head with 6 knives • Tight cutting clearance in the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter cover • Analog, easy-to-read thermometer • 6 stainless steel knives, 7 stainless steel distance rings, two bowls Drive & control: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds can be controlled independently • Large, easy-to-use push buttons with hygienic protective covers Safety features: • Overflow protection in accordance with UVV • Ingress protection in accordance with UVV • Noise reduction cover • Electromagnetic brake Nwedpfxeymd Sis Ag Ijc • Emergency stop function • Machine meets HACCP requirements • Machine complies with UVV • BG certified Technical data: • Bowl volume: 20L • Usable fine emulsion capacity: approx. 16kg • Number of knives: 6 • Speed: 1500/3000 rpm • Knife shaft power: 3.3/4.5 kW • Mains voltage: 400 V • Control voltage: 24 V • Circuit breaker: 16A (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Type: DMK 20 C Condition: Used, major inspection carried out, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement