Used Powder Applicator for sale (9,776)

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Iodpfx Apezg Er Ae Djih Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Iisdpfxjzhadco Ap Dsh Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Iodpszhkfqsfx Ap Doih Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Ijdpfx Apjzd Axbs Deih Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Atlas Xenon Weather-Ometer / Weathering Test Device Atlas Ci3000+ Xenon Weather-Ometer Xenon test device for artificial weathering and light aging For sale is a used Xenon Weather-Ometer from Atlas Material Testing Technology LLC. The device is suitable for weathering tests, light aging, material testing, quality control, research and development, as well as aging tests for plastics, paints, coatings, and materials. Technical data Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Device type: Xenon Weather-Ometer / Weathering Test Device Year of manufacture: 12/2010 Light source: Xenon arc lamp Lamp rated power: 4,500 W Operating range Xenon lamp: 1,700 – 4,500 W Device model according to display: Ci3000+ W Sample sensor 1: Black standard Sample sensor 2: Black panel Light sensor 1: CI 300 – 400 nm Light sensor 2: CI 420 nm Mains connection: 220 / 380 V Frequency: 50 Hz Connection type: 3/N/PE Rated current: 50 A Power consumption: 9.5 kW Control voltage: 24 VDC Compressed air supply required Operating pressure: 80 – 100 PSI (552 – 689 kPa) Compressed air consumption: approx. 4 CFM (0.11 m³/min) Dimensions: approx. 950 x 730 x 1830 mm (W x D x H) Required footprint: approx. 1050 x 2030 mm (W x D) Weight: approx. 404 kg Minimum distance exhaust hood: approx. 102 mm to 152 mm Equipment Touchscreen control panel Xenon burner Test chamber with sample rack Black standard sensor Black panel sensor CI 300 – 400 nm light sensor CI 420 nm light sensor Water-cooled lamp system Exhaust connection Interface connections Integrated humidification system Documentation / Documents as shown in the pictures Accessories / Documents Iedpjzf D Rnefx Ap Deih Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Documentation as shown in the pictures Accessories as shown in the pictures Areas of application Artificial weathering Light aging testing UV and Xenon testing Material testing Plastic testing Paint and coating testing Colors and pigments Textiles Packaging Automotive industry Construction and materials testing Quality assurance Research and development Condition Used Good optical condition Optical condition as shown in the pictures Scope of delivery 1x Atlas Ci3000+ Xenon Weather-Ometer Available accessories as shown in the pictures Available documentation as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Climate test chamber / temperature test chamber Vötsch VC 4060 climate test chamber Temperature and climate test chamber with humidity, water-cooled (converted to R-452a) For sale is a used climate test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Equipment type: Climate test chamber / temperature test chamber Test chamber volume: approx. 600 liters Controller: S!MCON / 32 Test chamber dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 4.0 K/min Temperature change rate, cooling: approx. 3.0 K/min Temperature deviation, temporal: ±0.1 to ±0.5 K Temperature deviation, spatial: ±0.5 to ±2 K Temperature gradient: approx. 1 to 4 K Climate range, temperature: -10 °C to +95 °C Humidity range: 10 % to 98 % RH Humidity deviation: ±0.1 to ±3 % RH Temperature deviation, climate operation, temporal: ±0.1 to ±0.3 K Temperature deviation, climate operation, spatial: ±0.5 to ±1.0 K Temperature gradient, climate operation: approx. 1 to 2 K Refrigerant: R452A Cooling: water-cooled Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated power: 7.8 kW Rated current: 15.0 A Fuse: 16 A slow-blow, provided by the customer 1 penetration Ø 50 mm, installed on the left 1 penetration Ø 125 mm, installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 controller Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side penetrations Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC 4060 climate test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Ijdozf E E Tspfx Ap Djih 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding by a freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Iisdpfszh I Dwjx Ap Djh Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Anton Paar Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. Iodpfszicwusx Ap Djih The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Iedpeziyqrofx Ap Deih Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   Iodpszpx Ucsfx Ap Deih The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Ijdpozra Rqofx Ap Deih Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Iiodpfeztyabsx Ap Deh Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. Iijdpfx Apozhlr Eo Dsh If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,590 mm Support distance B: 5,890 mm Beam length: 6,390 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm UK crane bridge: 4,145 mm UK portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load chains: 2 Weight at 5 m lift: 65 kg Travel unit / Trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Ijdpfx Aszgv U Uop Doih Conductor rail / Power supply Steel support and beam structure Documentation / Crane test book available Hoist test book available EC declaration of conformity (crane) available EC declaration of conformity (hoist) available Assembly and operating instructions available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operations Material handling Logistics Longest component: approx. 6.4 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam structure Control / Operating elements Main switch Documentation / Test book EC declarations of conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing Iisdpfszlp Ixsx Ap Doh For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller and an SP2 teach pendant. The robot system is ideally suited for fast pick & place applications, assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, teach pendant, robot connection cable, and other accessories, will be delivered as shown in the pictures. Technical data: Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Year of robot manufacture: 02/2024 Year of controller manufacture: 02/2024 Controller: CS9-TS2-40 Teach pendant: SP2 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: Stäubli CS9-TS2-40 rack controller SP2 teach pendant VAL 3 activated PROFINET Device Ethernet interface Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Power consumption: 1700 VA PROFINET Device Ethernet Digital input/output Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling mounting installed VAL 3 programming system Accessories as shown in the pictures Iodpfxezlry Ro Ap Dsih Application areas: Pick & Place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2024. Optical condition as shown in the pictures. System start and information menus tested. Robot system including controller and teach pendant. The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping via freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal Isdpfx Apjzd Tllo Dsih The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Isdpfxewymlyj Ap Deih Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: used, Weiss Type: SWT 1000 – IPX9K Weiss spray and splash water testing chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standard-compliant testing of the water protection classes of housings or components. With optional equipment, testing according to IPX9K (high-pressure/jet water), ISO 20653, and other standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, according to the following standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible protection classes & tests The SWT system can cover a wide range of tests (depending on the equipment): Basic configuration: IPX3 / IPX4 tests (spraying or all-round splashing water). Optionally: Higher protection classes up to IPX5 / IPX6 (jet water), and – with appropriate high-pressure equipment – up to IPX9 or IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection classes) or ISO 20653 (e.g., for vehicle or outdoor applications) – depending on the target and area of application. Typical applications Some typical application scenarios for such a test chamber: Electronic devices or housings that are to be used outdoors or in humid environments, e.g., outdoor lighting, control cabinets, units, panels. Components for vehicles or machines, especially if they are exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). Batteries or electrical components that need to be tested for water protection – e.g., in the automotive industry or in e-mobility. Ijdpfszil T Ssx Ap Dsih Technical data: Suitable protection classes: IPX3 / IPX4 Swivel arm radius (for IPX3/4 tests): standard 200 mm (for SWT 1000) – optionally up to 400 mm. Test chamber (interior) Internal dimensions: Approx. 1,000 × 1,015 × 1,000 mm (W x H x D) Operation / Control: Web panel or GUI for programming and controlling the tests. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). Iodpfx Apozixy So Dsih It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Iijdpozizr Refx Ap Djh Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Testing System CSR-60/810/S | -60 °C to +170 °C 39.6 kW | Test chamber 1200 L Description: For sale is a professional climate and temperature testing system from CTS GmbH, consisting of a CSR-60/810/S type conditioning unit and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations over an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, consisting of: Conditioning unit (CSR-60/810/S) External test chamber (Test chamber 1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of construction: Temperature & Climate Temperature range: -60 °C to +170 °C Humidity range: 10 % to 80 % RH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A slow-blow Connection type: Fixed connection Refrigeration system Refrigerant: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Iiodpfxezimgas Ap Doh Test chamber 1200 L Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Iisdezix Ucspfx Ap Djh Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Iiedpfxjziizys Ap Dsh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Leybold Oerlikon Type: RUVAC WSU 501 Iijdpfeytfzrsx Ap Doh Leybold Oerlikon RUVAC WSU 501 Roots vacuum pump booster, 505 m³/h, 2.2 kW, DN100 For sale is a powerful industrial vacuum roots pump from the manufacturer Oerlikon Leybold Vacuum. The roots pump serves as a booster pump to increase the pumping speed in vacuum systems and is typically operated together with a backing pump. It is ideally suited for industrial applications such as coating systems, vacuum furnaces, laboratory equipment or general vacuum technology. The pump impresses with its robust design and high pumping capacity. Technical data: Manufacturer: Oerlikon Leybold Vacuum Model: RUVAC WSU 501 Year of manufacture: 12/2010 Pumping capacity: 505 m³/h (50 Hz) / 606 m³/h (60 Hz) Max. pressure difference: 80 mbar Motor power: 2.2 kW Speed: 2900 rpm Voltage: 230 / 400 V three-phase Current draw: approx. 9.0 / 5.2 A Operating mode: S1 continuous operation Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.