Used Powder for sale (1,131)

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Rear doors, Smooth exterior walls Equipment: - 40mm insulated wall - +2° C to +10° C - GOVI 1600N Net: €8,025.21 / Gross: €9,550.00 Item number: UC6113251319.01 Technical data: • Brand: Unsinn • Model: UKT 6C 2513-13-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 250 x 135 x 190 cm • External dimensions (LxWxH): 391 x 192 x 248 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 625 kg • Payload: 675 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layer glued screen-printed plywood, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich construction • Interior and exterior skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door, double-wing with aluminum hinges • Refrigeration unit toggle fastener and stainless steel door latch • Rear frame and trim profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Fully encapsulated unit with "outdoor" housing mounted on the front at the top • Environmentally friendly, CFC-free refrigerant • Electronic defrosting system for the evaporator • The control display is lockable and therefore protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230-volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse drive automatic Hnodpfx Akszy Dwqs Uou • Plastic mudguards • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load-bearing capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically lowerable, motorcycle chock, bicycle carrier Features: - LED lighting - Foldable - Rear wheel guide Net price: €2,306.72 / Gross price: €2,745.00 Article number: LMT175241011.01 Technical data: • Brand: Lorries • Model: MT-1 Hsdpfxozy Dxze Ak Uonu • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (German technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 238 x 104 x 0 cm • External dimensions (L x W x H): 332 x 173 x 96 cm • Permissible total weight: 750 kg • Unladen weight: 175 kg • Payload: 575 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • HALF-FOLD system, allowing you to fold the trailer in half to save space for storage • Folded dimensions: 233 x 171 x 65 cm (H x W x D) • Lowerable loading platform via hand winch • Stable frame construction • Frame galvanized and then powder-coated in an elegant black color • Trailer can be stored upright • Closed floor made of aluminum tread plate • Rear floor with ramp over the frame • Wheel holder (motorcycle chock) for stable fixation of the motorcycle • Suitable for transporting one motorcycle and 2 bicycles • Foldable, galvanized + powder-coated tubular drawbar • Plastic mudguards • 8 lashing points distributed on the loading platform • Maintenance-free rubber spring axle • 13-pole connector • Large-sized LED safety lighting • Integrated rear fog light • Support wheel mounted • 2x bicycle carriers for mounting on the loading platform (unmounted) • 1x rear wheel guide for stabilization (unmounted) _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Type: 8-pocket rotary airlock Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Hnodpfszwfbxox Ak Ueu Outlet size: 510 x 510 mm Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. Hnjdpfoz Ixfvsx Ak Ueu The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Hnodpfozvxvaox Ak Uou Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 2000 Rear Tipper ⭐ NEW MODEL ⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 67cm Total weight: 2000kg Payload: 1590kg Braked two-axle trailer Overrun brake and handbrake by Knott Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Hand pump with adjustable handle OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tilting mechanism -Charger -Remote control -Bluetooth remote control -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf screen in various heights, also closed Hnedpfxsz H Uw Eo Ak Uou -Extension sideboards 30cm with tension lock -Flat cover with or without bow -High cover More accessories available on request! Plus vehicle registration document and shipping costs from the manufacturer to us: €200.00 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 2000 Rear Tipper ⭐ NEW MODEL ⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 67cm Total weight: 2000kg Payload: 1590kg Braked two-axle trailer Overrun brake and handbrake by Knott Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Hand pump with adjustable handle OPTIONAL ACCESSORIES Hodpfx Asz Iaansk Usnu -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tilting mechanism -Charger -Remote control -Bluetooth remote control -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf screen in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bow -High cover More accessories available on request! Plus vehicle registration document and shipping costs from the manufacturer to us: €200.00 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 285 kg, maximum load weight: 1,715 kg, overall weight: 2,000 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,500 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 2000 2 ⭐New Model⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 2000kg Payload: 1715kg Braked single-axle flatbed trailer Overrun brake and handbrake by KNOTT Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tension lock Foldable and removable on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED outline lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES Hedpjz Iamusfx Ak Uonu -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Black Edition (Powder-coated side boards and rims in black) -Ramps -Steel plate on base plate -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side boards 30cm with tension lock -Flat cover with or without bow -High cover Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system Hnjdpfxjz Hkdns Ak Uou - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg pads including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber Hnodpfx Ajz Egkhek Uou large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting -theft protection -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender Hnedpsz Eg Awefx Ak Uju – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: good (used), 1 x Guttridge Screw Elevator Height is 3m. Screw is 3.3m. Hnsdsz Ap Ndopfx Ak Usu *The is no motor on this for the screw elevator but the horizontal screw is complete*

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Hnodjz A Ufzjpfx Ak Usu Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: new, Year of construction: 2026, overall weight: 1,900 kg, Big Bag unloading station complete with electric lifting hoist, discharge hopper, structural steel support frame, service platform with access stairs, and perimeter safety guards. Suitable for handling and unloading various bulk materials, including plastic granules, plastic flakes, flour, powders, and similar products. Hodpoz Hlgksfx Ak Usnu

Condition: used, Year of construction: 2024, operating hours: 682 h, functionality: fully functional, working width: 510 mm, area performance: 1,530 m²/h, overall weight: 240 kg, tank capacity: 55 l, This used, trailing-type scrubber dryer BD 50/55 W Classic from Kärcher (year of manufacture: 2024 | operating hours: 682) has been technically overhauled and cosmetically refurbished in our in-house workshop. The brush head and suction bar have been newly powder-coated. New suction strips and a new disc brush have been installed. Hedpfx Aksz Nd Nqe Uenu Thanks to its compact design, the machine offers excellent visibility. The self-explanatory operation allows for easy starting and reduces the need for training. The standard curved suction bar ensures rapid drying thanks to the reduced residual water on the cleaned surfaces. The integrated drive system and the comfortable four-wheel system make it easy and energy-efficient to operate. An externally supplied charger ensures that the batteries are charged during daily use. The BD 50/55 is suitable for use in public buildings, in retail stores and car dealerships, as well as in industrial environments. Technical data: Working width, brushes: 510 mm Working width, suction: 850 mm Tank capacity, fresh/dirty water: 55 / 55 l Theoretical area performance: max. 2550 m²/h Practical area performance: 1530 m²/h Permissible total weight: 240 kg

Condition: used, 2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Hnedpfszzyrgex Ak Usu Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2017, condition: excellent (used), Karl Schnell Processed Cheese Blending Line Capacity: 5,000 kg per hour. Complete Karl Schnell preparation/blending line, ideally suited for the preparation and blending of ingredients prior to the processed cheese melting process. Designed for efficient processing of cheese blocks, butter, powders, and other dry ingredients. The Karl Schnell grinder offers capacities of up to 5,000 kg/h, depending on the product. Hedozxcgbjpfx Ak Ujnu The line can feed a processed cheese UHT system and/or multiple cookers, making it highly suitable for continuous industrial production. Two heavy-duty ribbon blenders provide efficient and homogeneous mixing of all ingredients. Large buffer tanks ensure controlled product flow. Equipped with heavy-duty Waukesha pumps, load cells, recipe-controlled operation, CIP capability, and an integrated pigging system. Designed for large-scale industrial use, offering high capacity, flexibility, and reliable ingredient preparation. Machinery: - Processed Cheese Blending Line 1. Trolley Elevator 2. Grinder 3. Conveyor 4. Blender 1 – 1,500 kg with buffer 5. Blender 2 – 1,000 kg with buffer 6. Pigging system

Condition: good (used), mileage: 153,323 km, power: 294 kW (399.73 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: electric window regulation, power mirror, - Brake booster - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Windshield - Power take-off (PTO) Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 Engine displacement: 10,518 cc GVW: 35,000 kg Body manufacturer: WIELAND B.V, BB.8200 TG Technical condition: good Optical condition: good MAN TGS 35.400 BB 8x4 WIELAND BLOWVAC BIGBAG 8200 – DRY MATERIAL SUCTION/BLOWING SYSTEM First registration: 04.05.2009 Operating hours: 13,442 hrs Drive: 8x4 Suspension: Leaf spring Engine power: 400 hp For sale is this MAN TGS 35.400 BB 8x4, equipped with a professional Wieland dry material suction/blowing system, type BlowVac BigBag 8200. This heavy-duty industrial unit was specifically designed for the suction, collection, transport, blowing, and filling of dry materials and bulk goods. Thanks to the powerful vacuum system and extensive equipment, this vehicle is suitable for numerous industrial applications. CHASSIS / TRUCK * MAN TGS 35.400 BB * 8x4 drive * Engine power: 400 hp * Heavy-duty MAN chassis * Leaf spring suspension * Suitable for heavy industrial applications * First registration: 04.05.2009 WIELAND DRY MATERIAL SUCTION SYSTEM Manufacturer: Wieland Type: BlowVac BigBag 8200 Design: Industrial dry material suction/blowing system Equipment includes: * 3-vane rotary piston vacuum pump * Maximum vacuum / maximum suction power: 900 mbar * Total container volume: 10 m³ * Suitable for the suction of dry materials and bulk goods * Blowing system available * Filling system available * BigBag system * Controlled emptying and filling of the collected material possible SUCTION CONNECTORS * Suction connector Ø 200 / 150 mm * Dome lid with suction connector * Large maintenance opening * Good accessibility for cleaning and maintenance work FILTER CHAMBER The Wieland system has a separate filter chamber for processing dry and dusty materials. This makes the system particularly suitable for applications where larger quantities of dust, powder, sand and other dry materials need to be collected. OPERATION & EQUIPMENT Hedpjzxgl Iefx Ak Uenu * Remote control * Blowing system * Filling system * BigBag system * Storage area * Storage area with sideboards * Various connections for suction hoses * Maintenance opening to the filter chamber * 2 supports at the rear of the vehicle * Heavy-duty industrial design OPERATING HOURS 13,442 operating hours APPLICATION POSSIBILITIES This MAN/Wieland combination is suitable for, among others: * Industrial cleaning work * Suction of dry bulk goods * Sand and dry construction materials * Dust and powder * Cement-like materials * Production residues * Cleaning of silos and industrial plants * Factories and industrial plants * Construction and infrastructure projects * Filling into BigBags * Blowing out of the collected material DESCRIPTION A heavy-duty...

Condition: used, ESTEVE double interior silo unit 2 independent storage cells Capacity 2 x 1,500 kg, totaling 3,000 kg Dry bulk product, likely flour Dimensions: 5300 x 2580 x 2630 mm Electrical supply: 380 V Common support frame for both silos Two metal silo bodies 1 - Filling: connection and piping Ø 80 mm Cell feeding via filling circuit 2 - Storage: 2 cells of 1,500 kg Separation of 2 batches or compatible products Graduated level indicators on both cells Front inspection ports 3 - Discharging: hoppers at the bottom Product directed towards the extraction system 4 - Extraction: mechanical system with rollers Product extraction at the outlet of the cells 5 - Screening: integrated sifter Sifter motor 0.75 kW according to installation sheet 6 - Transfer: pneumatic system RBL 10 Transfer motor 3 kW according to installation sheet Piping circuit of approximately 25 m Distribution piping included 7 - Filtration: textile filter sleeves Motors installed at the bottom Integrated storage, extraction, screening, and transfer Hsdpfx Aezx Thcjk Usnu Brand: ESTEVE, now integrated into Shick Esteve The ESTEVE JE 2500 double interior silo unit is a professional, used equipment designed for storing dry bulk ingredients. It includes two independent 1,500 kg cells each, for a total capacity of 3,000 kg. The identified use is likely related to flour or compatible powdered dry products. The unit combines storage, mechanical extraction, screening, filtration, and pneumatic transfer in a single installation powered by 380 V. Why this model stands out The JE 2500 is not limited to storage; it brings together several functions necessary for handling a bulk ingredient. Its two cells allow for the separation of two batches or two compatible products, while extraction via rollers ensures the mechanical removal of the product. The integrated sifter and RBL 10 pneumatic transfer system complete the installation for organizing its flow. This configuration is particularly advantageous when a project requires a professional interior flour silo with several pieces of equipment already grouped on the same frame. Key advantages Two independent 1,500 kg cells Total storage capacity of 3,000 kg Mechanical extraction via rollers Pneumatic transfer system type RBL 10 Sifter integrated into the unit Filtration with textile sleeves Filling via Ø 80 mm connection Front inspection ports Graduated level indicators on both cells Unit installed on a common support frame

Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 886 kg, maximum load weight: 2,614 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,560 mm, loading space width: 1,840 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 356 184 3500 2E Three-sided tipper NEW VEHICLE Internal dimensions: 356cm x 184cm Side wall height: 35cm Loading platform height: 75cm Hnodpfxozz N Eco Ak Ueu Total weight: 3500kg Payload: 2614kg Braked tandem axle trailer Overrun brake and parking brake from AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side walls with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED outline lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 41 degrees backwards Lateral tilting by repositioning the safety pins Electric tipping operation with plug for charging the 12V battery Electric limitation of the tipping angle to the side U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side walls (price reduction) -Black Edition (Powder-coated side walls and rims in black) -Integrated loading ramps 2800kg -Extended tipping angle to 52 degrees (5-stage cylinder) -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side walls 30cm with tensioning latch -Flat cover with or without rail -High cover 180cm or 200cm Further accessories available upon request! Plus freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories that incur additional costs. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories, including for trailers from various manufacturers. You can find a wide selection of rental trailers with us. Visit us online or come by directly!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change Hsdpfewymlyex Ak Ujnu - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: excellent (used), Year of construction: 2019, BEAM MODULO 400 Year Mfg 2019 Siemens Control Build Volume: Approximately 650 × 400 × 400 mm (or roughly 600 × 400 × 400 mm operational) with continuous 5-axis motion kinematics Laser Source: Ytterbium fiber laser options ranging from 500 W up to 2 kW Hnsdpfjzvlhpox Ak Usu Deposition Heads/Nozzles: Supports an automatic tool changer to swap between different heads (e.g., the 10Vx for fine precision down to 0.1 mm and the 24Vx for higher deposition rates) without stopping production Powder Delivery: Equipped with a vibrating multi-hopper powder feeder system capable of managing up to 4 or 5 separate material feed options

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: Hjdpfxoyivbzj Ak Uonu - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Main Advantages of the Machine Hjdpox Dkx Nsfx Ak Ujnu Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm Note: The KDP1000 sandblasting machine is supplied as a self-assembly version.

Condition: new, mileage: 36 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,815 kg, maximum load weight: 4,735 kg, overall weight: 8,550 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 4,000 mm, operating hours: 90 h, Equipment: ABS, air conditioning, central locking, crane, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - Fuso 9C18 City Roll-off Tipper with GSR - Delivery time approx. 2 months - Roll-off body according to DIN 30722-3, 6000kg lifting capacity, hydraulic articulated arm, hydraulic container locking - Optional preparation for crane container with additional hydraulic container locking at the front, hydraulic quick-release coupling, switch for crane/roll-off operation - Automatic transmission (Duonic) - Air conditioning - Reversing camera with hands-free function, DAB, Carplay, Bluetooth, etc. - Differential lock - Tow hitch ball coupling 3500kg - Comfort seat - 1x tool box - 2x shovel holders - 2x powerful LED work lights at the rear, in the cab - LED side marker lights (legally required) - Components for underrun protection, galvanized and powder-coated Hodpfx Akjzv Ntpj Ujnu - Lateral underrun protection profiles, aluminum, anodized and powder-coated - Fasteners for fenders, galvanized and powder-coated - Rear lights with mudguards - Gross vehicle weight: 8550kg, unladen weight: 3815kg, payload without container: 4735kg - Downrating to 7.5t possible - Wheelbase: 3400mm - M+S tires Continental - Fog lights - LED daytime running lights - Various containers available as optional extras - Optional roof rack for lights: 2x LED Hella rotating beacon, 2x LED Hella Black Magic high beam, 2x LED outline light, price depending on configuration, available on request - Further pictures of the roof rack available on request - Pictures show a reference vehicle in black RAL 9005, glossy. Painting in any desired RAL color for the cab and all components is possible and included in the price. - Subject to errors and prior sale! - More information and XXL pictures can be found on our website: - For inquiries in English, please call ... Air conditioning, automatic climate control, automatic transmission, VAT can be shown separately, ASR, ABS, radio, telephone with hands-free function, on-board computer, heated mirrors, electric windows in front, electric door locks, central locking with remote control, trailer coupling, fog lights, power steering, differential lock, tinted windows, tachograph, cab: day cab, air-suspended driver's seat, electric windows, work lights, auxiliary drive, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, emission sticker: 4 - Green, hands-free system.