Used Power Amplifier for sale (40,632)

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: Nodpfx Aijz E A Rws Aswn - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, Hydraulic power unit, hydraulic power pack, Polarteknik PMC 185 Bar, Used Machine Nwedezw Eghepfx Ai Ajn Manufacturer: Polarteknik PMC Oy Ab (Made in Finland) Product No.: 93980 Diagram No.: PF314022 Design Operating Pressure: 185 BAR Year of Manufacture: 2006 (28 March 2006) Design: Integrated hydraulic oil tank with oil level indicator, pressure gauges, filtration system, high-pressure hoses and electric motor drive. Electrical Data: 400 V, 11 kW, 21.5 A Ideally suited for powering and supplying industrial presses, special-purpose machinery, lifting equipment, abrasive blasting / Blastman systems, as well as other hydraulic systems requiring high pressure. Overall Dimensions: Width: 1300 mm Depth: 980 mm Height: 1200 mm

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support Nedjz Nia Ujpfx Ai Aown - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, B&R 0PS3200.1 Power Supply / Power Unit SN: AF651013330 - 3-phase / 24VDC / 20A, unused in opened original packaging (protective film still sealed), 100% operational, scope of delivery as per photos. Nwjdpfex Ht A Ejx Ai Asn

Condition: excellent (used), Year of construction: 2017, Motor from Lammers Antriebstechnik 11kW, 1470/min Valves: HYDAC Nwjdpfxorm Nhls Ai Asn Pump 30 cm³/rev Tank 250 liters Pressure 100 bar max Oil HLP 46

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Nwjdpfxoz Atinj Ai Aon

Condition: new, Year of construction: 2023, functionality: fully functional, Manufacturer: CGM Continuous power output, 3-phase: 7.00 kVA - 5.6 kW - 400 V Continuous power output, 1-phase: 4.11 kVA - 3.28 kW - 230 V Honda gasoline engine, Model GX 390 Manual and electric start versions Fuel tank capacity: 15 liters AVR regulation Connector panel: 1 x 16 A - 400 V / 5-pole 1 x 16 A - 230 V / 3-pole 1 x 16 A - 230 V Schuko Nwsdpfx Aez Sqfwsi Aon Weight: 85 kg Dimensions in mm: 825 x 550 x 530

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour Nwsdpfx Asxw Tg Nsi Aen # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Concrete Power Trowel MT24-2 – Standard blade trowel suitable for all finishing work on concrete surfaces, precast concrete elements, industrial floors, bonded and specialty screeds, and asphalt. – Large blades for effective surface treatment. KINGWAY MT24-2 CONCRETE POWER TROWEL ✒︎ Engine type: G200F ✒︎ Troweling diameter: [cm/in] 61/24 ✒︎ Engine / Drive: 1-cylinder, 4-stroke, OHV LONCIN G200F ✒︎ Engine output P1/P2: 4.8 / 4.1 kW at 3,000 rpm ✒︎ Displacement: 196 cm³ ✒︎ Fuel tank: 3.6 l ✒︎ Engine oil: 0.6 l Nwedjyk S Tcspfx Ai Aon ✒︎ Starting system: Recoil starter ✒︎ Rotor diameter: 760 mm ✒︎ Number of blades: 4 ✒︎ Blade size (L/W): 260 / 150 mm ✒︎ Blade angle: 0 - 15° ✒︎ Rotational speed: 60 - 100 rpm ✒︎ Sound power level LWA: 108 dB(A) ✒︎ Trowel weight: 63 kg ✒︎ Engine weight (net/gross): 16 / 19 kg PRICE: €630 net €750 gross

Condition: used, Emergency power generator / Generator set Nedpeztnh Hsfx Ai Aewn Manufacturer: Anton Piller KG Type: NKTB 2-818 Year of manufacture: unknown Speed: 3000 rpm Voltage: 400 / 231 V Current: 118 A Frequency: 50 Hz Apparent power: 82 kVA Efficiency/Power factor: $\cos \varphi = 0.8$ (corresponds to approx. 65.6 kW active power) Protection class: IP 23 Insulation class: F 191026ä

Condition: used, 5 5 kW as good as new Nedpfx Aszrxqiei Ajwn

Condition: used, Horlemann HR10U-S switchgear, 12 kV HR 10U, the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit strength: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC cast resin transformer: Design: Cast resin High-voltage side: 10 kV Low-voltage side: 400-230 V Circuit: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The pressure relief of the switchgear is carried out via a pressure relief chamber in the lower part of the switchgear bay. Documents: Test report Wiring diagram Nodpfsnfu Dyex Ai Ajwn You can find more new and used items in our shop! International shipping costs on request!

Condition: used, TDK GEN20-120-1P230, TDK-Lambda 19-inch laboratory power supply 44 mm housing, 0 - 20 V/DC / 0 - 120 A Switched-mode Input voltage range: 85 - 265 V/AC Integrated RS-232 / RS-485 interface External, analog programming and monitoring Njdpfek Uuh Tex Ai Aown Design (general): Rack-mountable Item condition: Used, in perfect condition R11B1_EK You can find more laboratory power supplies – new and used – in our shop! International shipping costs available upon request!

Condition: used, EA Elektro-Automatik EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Item condition: Used - 6.3A - 2400W Price: 7.00 Nedpfx Aioyplqlj Aswn You can find more laboratory power supplies – new and used – in our shop! International shipping costs available upon request!

Condition: new, Promess Servo Press KA-EMF80 80 KN, New, with DMS Amplifier Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Condition: New Nodpfx Asrgn Nnji Aown Calibrated: Yes DMS Amplifier: BA 624.u2 More servo presses, new and used, can be found in our shop! International shipping costs available upon request!

Condition: good (used), Spindle amplifier module, Servo Amplifier Module, CNC Control System, Plug-in card, -Manufacturer: FANUC -Type: A06B-6152-H045H580 Nwedpfx Aswrxzwoi Ajn -Dimensions: 150/380/H290 mm -Weight: 8.2 kg

Condition: good (used), power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U1K224 -Power: 1200 VA Nodpowcyz Hsfx Ai Aswn -Dimensions: 250/175/H215 mm -Weight: 19,2 kg

Condition: good (used), power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Siemens, power supply DC power supply SIMATIC S7-400, power supply PS407. 10A -Type: 6ES7 407-OKROO-OAAO -Power: 10 A -Dimensions: 215/50/H290 mm -Weight: 1.4 kg Nwjdpfxswc Nmfs Ai Aen

Condition: used, functionality: unexamined, Ferwood Code: RU0002548 - Manufacturer Code: KL9110 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 0.5KG - 20X20X20 Nedpfx Aisyk Efxe Aswn

Condition: used, functionality: unexamined, Ferwood Code: RU0007369 - Manufacturer Code: V15-10-00-0R - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nwedpfx Ajv Ef Thei Ajn

Condition: used, functionality: unexamined, Ferwood Code: RU0010019 - Manufacturer Code: CJ1W-PD025 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nedpfxov In Tis Ai Ajwn

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm Nedpfx Aiev Tvtne Aown -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Nodpfx Aoxnldzsi Aown

Condition: good (used), Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact Power supply Quint Power -Type: QUINT4-PS/1AC/24DC/20 -Order No.: 2904602 -Input: 100-240V AC -Output: DC 24V 20A -Number: 16x power supply available Nsdjxpf Dkjpfx Ai Aswn -Price: per piece -Dimensions: 130/70/H130 mm -Weight: 1.4 kg/pcs

Condition: good (used), power converter, power supply, power pack, switching power supply, power supply, DIN rail power supply -Manufacturer: Siemens, SITOP PSU8200 power supply -Type: 6EP3437-8SB00-0AY0 -Input: 3 AC 400-500V/2.1-1.7A 50/60 Hz Njdpfexph Dgox Ai Aewn -Output: DC/24 V/40A -Number: 6x module available -Price: per piece -Dimensions: 150/135/H150 mm -Weight: 3.2 kg/piece