Used Power Amplifier for sale (39,609)

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 Ksdpfxszd Uhhs Ac Eedr * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: used, Year of construction: 2020, 1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent power cos φ=0.8: 2,483kVA, rated reactive power cos φ=0.8: 1,490kVA, rated current at cos φ=0.8: 3,584A, frequency: 50Hz, voltage: 400V, speed: 1,500/min, overspeed: 1,800/min, power factor (ind.-cap.): 0.8-0.95, efficiency cos φ=1: 97.4%, efficiency cos φ=0.8: 96.5%, moment of inertia: 117kgm², cable outlet: left, insulation class: H, temperature rise (at drive power): F, max. permissible ambient temperature: 40°C, weight: 6.752t, with documentation. An on-site inspection is possible. Kjdpfx Acezvgg Te Esdr

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, type of input current: three-phase, power: 600 kW (815.77 HP), input voltage: 400 V, rotational speed (min.): 600 rpm, rotational speed (max.): 600 rpm, fuel: domestic gas H, overall weight: 25,000 kg, type of cooling: water, warranty duration: 1 months, nominal power: 630 kW (856.56 HP), input frequency: 50 Hz, Equipment: documentation/manual, We offer this ALC "DIESELMASH - CGU" DvGA-630 8CHN25/34 block-type gas cogeneration power plant in very good condition, manufactured in 2003. Manufacturer: ALC "DIESELMASH - CGU" Model: DvGA-630 8CHN25/34 Year of manufacture: 2003 Kdedpfezlwi Dex Ac Ejr If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2016, operating hours: 32,318 h, functionality: unexamined, power: 30 kW (40.79 HP), Used Spanner HKA 30, year of manufacture 2016. Kdedpfx Aezbnklsc Eer The unit was fully operational. It has already been dismantled and is ready for collection. 30 kW electric 73 kW thermal Operating hours: 32,318 Engine: GM 5.7L, non-turbo Includes complete control cabinet and numerous accessories.

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, lifting height: 3,000 mm, fuel type: diesel, power: 39 kW (53.03 HP), Empty weight: 3.680 kg Lifting capacity: 2.500 kg Maximum passing height: 207 cm CE mark: yes Technical condition: very good Visual appearance: very good Kdedpfx Acexkrv Aj Esr Please contact Tobias Mayr for more information

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Ksdpfxszul T Nj Ac Ejdr Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: used, ETS Solutions Type: M437A + IPA120H + GT762M / GT350M + HE762SQM-370 + THVS720-W5 Technical data: Sine force: 4,000 kgf / approx. 39.2 kN Random force: 4,000 kgf / approx. 39.2 kN Frequency range: DC to 2,500 Hz Max. continuous displacement: 51 mm Max. sine vibration speed: 2.0 m/s Max. sine acceleration: 981 m/s² / approx. 100 g The IPA120H provides a significantly higher peak power during shock testing. Shock power IPA120H / M437A: 3 ms: 12,540 kgf / approx. 123 kN 6 ms: 11,880 kgf / approx. 116.5 kN 11 ms: 9,240 kgf / approx. 90.6 kN 18 ms: 5,676 kgf / approx. 55.7 kN 30 ms: 2,688 kgf / approx. 26.4 kN Max. shock speed: 2.97 m/s Max. shock displacement: 51 mm Pulse shape: Half Sine Pre/Post Pulse: Square 20 % Vibration exciter type M437A Diameter of armature: 370 mm Effective moving mass: 34 kg Number of threaded inserts: 16 stainless steel inserts Threaded inserts standard: M10 Bolt circle: 8 x Ø 150 mm Bolt circle: 8 x Ø 300 mm Resonant frequency of armature without payload: approx. 2,250 Hz Max. static payload: 500 kg Weight of shaker approx.: 2470 kg Dimensions of shaker with GT slip table approx.: 2,426 × 1,082 × 1,185 mm (L × W × H) Base frame: approx. 2,130 mm length, 700 mm height Surface area of slip table: 762 × 762 mm Head expander Type: HE762SQM-370 Surface area: 762 x 762 mm Height: approx. 250 mm Weight: approx. 74 kg Usable frequency range: 5 to 2,000 Hz Resonant frequency: 1,216 Hz Power amplifier Type: IPA120H Amplifier power: 120 kW Efficiency: > 90 % Switching frequency: 112 kHz Signal-to-noise ratio: > 70 dB Dimensions approx.: 550 x 800 x 2070 mm Weight approx.: 550 kg Cooling fan Type: HP-3AV / HP-3A Motor power: 7.5 kW Air flow rate: approx. 0.73 m³/s Air pressure: approx. 0.082 kgf/cm² Compressed air supply for shaker: 6.9 bar Climate testing chamber Type: THVS720-W5 Temperature range: -70 °C to +180 °C Heating rate: 5 K/min Cooling rate: 5 K/min Humidity range: 10 % to 98 % RH Test chamber dimensions: 1400 x 1200 x 1200 mm Test chamber volume: approx. 2016 liters External dimensions: 4600 x 2350 x 2500 mm Voltage supply: 380 VAC / 50 Hz / 3 phases Power consumption: max. 45 kW Refrigerant: R449A / 4.8 kg Refrigerant: R508B / 3.2 kg Weight of climate chamber: approx. 7000 kg Water-cooled Cooling water requirement: 4.9 t/h Cooling water inlet: ≤ 18.3 °C Water pressure: 0.2 to 0.4 MPa Water connection: G2" / DN50 Mobile shaker chamber Travel distance of chamber: approx. 1050 mm Kdsdjzu R U Espfx Ac Eer The climate chamber is mounted on a rail system and designed for combination with the horizontal slip table and the vertical shaker. Chamber equipped with: 1 x vertical connection plate 2 x horizontal connection plate 1 x blind plate Thermal barrier for head expander Thermal barrier for slip table Application: Vibration testing Sine testing Random / noise testing Shock testing Temperature testing Humidity testing Climate and vibration testing Environmental Stress Screening (ESS) Condition: used Scope of supply: Shaker M437A IPA120H power amplifier GT762M / GT350M slip table HE762SQM-370 head expander HP-3AV cooling fan THVS720-W5 climate testing chamber Age-related and usage-related signs of wear Dirt, paint chips and traces of corrosion present Optical condition according to pictures Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone. If you have any further questions, please do not hesitate to contact us by telephone.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 mm with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Kdodpozdc Iqjfx Ac Eor Loading table for sheets of 3000 x 1500 mm. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Always used for thin sheets, max. 2 mm. A tapping head TU6 is included, but it displays an error message.

Condition: like new (used), Year of construction: 2021, WEISS Ltd. used / tested CR heavy duty table with servo amplifier B&R 8V1180.00-2 EXTREME LOADABLE, FOR HORIZONTAL AND VERTICAL 585Kg axial runout : 0,02 mm Radial runout : 0,02 mm Center opening : Kdjdjpa Nz Dopfx Ac Esr 346 mm max. dynamic axial force : 70000 N B&R: 8V1180.00-2 Modular mechanical design by plug-in modules Integrated mains filter Integrated or optional external braking resistor All connections in pluggable design Integrated electronic restart interlock ACOPOS servo drive, 3x 400-480 V, 19 A, 9 kW, line filter, braking resistor, DC link power supply and electronic safe restart interlock integrated

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Kdjdpfezizz Sex Ac Esr Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: Ksdpfszru Rrox Ac Eodr ML60B BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: • Used. • Visual condition as shown in the photos – normal signs of use.

Condition: good (used), Year of construction: 2012, Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module -Manufacturer: Fanuc, Spindle Amplifier Module from CNC machining center Santenberg GTC S 2 -Type: A06B-6111-H011#550 -Number: 2x servo module available -Price per piece -Dimensions: 285/90/H380 mm -Weight: 4.7 kg/pc. Kedpfx Aji Sdgnjc Eedr

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Ksdpfozrl H Rex Ac Eodr Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: new, Year of construction: 2026, It is a complete painting system, comprising the following components: 1) An oven with an air heater (the type of fuel can be adapted to the client's specifications). 2) A spray painting booth equipped with an absorbent filtration system suitable for even the most demanding paint applications. Kdedpfx Acsyaqt Te Esr 3) Two parking areas where parts can be placed after painting or curing. 4) A rail system that enables easy movement of parts from one station to another. 5) A trolley for transporting the aforementioned parts. 6) A fully integrated and robust steel structure, engineered for high static stability and to minimize the risk of component failure. From both a design and technical specification perspective, the above installation constitutes a comprehensive and autonomous electrostatic painting line. For limited systems, there is an offer for the complete package at 115,000 euros.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location. Ksdpfszrnhwjx Ac Eodr

Condition: good (used), Year of construction: 2002, operating hours: 160 h, functionality: unexamined, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 1,100 mm, total length: 3,900 mm, total height: 2,150 mm, fuel: diesel, overall weight: 3,220 kg, continuous power (apparent): 250 kVA, continuous power: 225 kW (305.91 HP), rotational speed (max.): 1,500 rpm, input current: 360 A, input frequency: 50 Hz, Equipment: documentation/manual, Brand: Perkins Model: G220S Year of manufacture: 2002 Serial number: 124588 Operating hours (recorded): 160 Kdedpfx Acezvaphj Eor Capacity (kVA): 250 Capacity (kW): 225 Engine brand: Perkins Engine model: 2006TAG2 Fuel: Diesel Alternator brand: Leroy Somer Alternator model: LL 6014 B Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 360 Dimensions L x W x H (mm): 3900 x 1100 x 2150 (excluding panel) Weight (kg) approx.: 3220 Quantity in stock: 1 Manufactured in: United Kingdom Comments: Ex emergency generator set, in excellent optical condition, with heat exchanger cooling system.

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Shimadian, Thyristor power controllers Ksdpeyhblcsfx Ac Eodr -Type: PAD36-Series -Number: 2x power controllers available -Price: per piece -Dimensions: 430/260/H255 mm -Weight: 18.4 kg/pc.

Condition: ready for operation (used), Hüttinger Elektronik 1324293 HF power amplifier 36/44 kW with 973412 reflectometer for laser machine, used, in good condition, 100% functional, supplied as shown in the photos. ATTENTION: Please enquire separately for charges for packing and shipping! Kdsdpfsx Etu Sex Ac Esr

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Kdodpfszvnhrex Ac Eer Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos Kdsdpfowkqmiox Ac Ejr -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Specification: Kdsdpfsqi D Sqox Ac Eor Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 Koden H Etfspfx Ac Eedr -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg

Year of construction: 2011, condition: excellent (used), CONTEC-COMPRESSORS POWER SYSTEM PS 2037 PM SCREW COMPRESSOR, WITH VARIABLE SPEED CONTROL (INVERTER) 37 KW MOTOR, CAPACITY 5 m3/min, PRESSURE 10 BAR. Ksdpfjfdl H Tex Ac Eedr YEAR 2011. TECHNICAL CONDITION: FUNCTIONAL. START-UP GUARANTEE. NET PRICE 13,000,- GROSS PRICE 15,990,- S0048 WE HAVE A LARGER QUANTITY OF COMPRESSORS, REFRIGERANT DRYERS, AND WELDING EQUIPMENT FOR SALE. WE PROVIDE SERVICE AND REPAIRS FOR SCREW COMPRESSORS. INSTALLMENT PLANS AVAILABLE!!! CONTEC-COMPRESSORS

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Kodszc Nw Aepfx Ac Ejdr Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears - Machine concept designed for the shortest set-up and changeover lines and Kdodpfoymfz Ssx Ac Eor maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer - Operating elements and PC protected against unauthorized access with lockable cabinet element