Used Pre Heater for sale (16,788)

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Hfodpfx Aox An Eqsbrsc

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Applications: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating during the cold season Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat input: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Hfedpfxjxwkw Ee Abrec Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Hfedpfx Abou Thhrjrjc Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller manufacturer: Cybelec, working width: 4,100 mm, pressing force: 225 t, TECHNICAL DETAILS Pressure: max. 225 t Folding length: max. 4,100 mm Hsdpexhd Rmefx Abrsfc Stroke: max. 265 mm Total output: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg EQUIPMENT - Lower beam crowning for precise bending processes. - 2 manual support arms - 2-hand foot switch

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Hsdpfxsg Sty Es Abrjfc Included: – Electrical Motor – Springs Vibrating screen can be sandblasted and painted.

Condition: new, Fully automated system Energy saving Industry 4.0 Durma Cloud Fiber Laser Technology Environmental awareness Synchronous minimum working range High precise repeatability High process accuracy Compact layout Hodpfsg Adn Isx Abrsfc Low noise level Simple and fast installation On request we will send you information material

Condition: used, New: No Price: On request VAT/margin scheme: VAT deductible = Company information = Hfjdpfjxr H Nmsx Abroc For further information you can reach us on weekdays from 8:30 am to 5:00 pm and on Saturday from 10:00 am to 3:00 pm by phone . You can also email us at: See you soon!

Condition: good (used), Year of construction: 2008, functionality: fully functional, rotor length: 2,820 mm, rotational speed (max.): 32 rpm, rotor diameter: 610 mm, funnel diameter: 3,353 mm, sieve perforation: 125 mm, TECHNICAL DETAILS Screen size: 125 mm Throughput: 45 m³/h Crushing unit: two shafts Length of each shaft: 2820 Diameter of each shaft: 610 mm Speed: 32 rpm Funnel opening: 11' (approx. 3353 mm) Electric motor: 1 x 160 kW Motor type: asynchronous Discharge conveyor: 8 m x 1 m Control and maintenance Integrated electrical control unit: yes Automatic lubrication system: yes MACHINE DETAILS Weight: 18,500 kg Hfjdpfx Abov Iqtforoc

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,500 h, machine/vehicle number: 2M220888, power: 21 kW (28.55 HP), overall weight: 65 kg, total width: 450 mm, total length: 500 mm, total height: 1,000 mm, control cabinet height: 1,000 mm, control cabinet width: 450 mm, temperature: 95 °C, Equipment: type plate available, Electric central heating system Mobile heating and cooling! Heating courier Hfsdsqtyrtepfx Abrec

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Hjdpedzqblsfx Abrjfc Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Hfsdpfx Abod D Dh Ajrsc Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Hjdpfx Ajw Tk E Ajbrjfc Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Hfodpfxexlp T Is Abrsc Press jaws: 76.1; 88.9; 108 mm

Condition: good (used), table length 1,500 mm / width 760 mm, Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested Hodjimz D Uspfx Abrsfc >>REX New price over 20,000 €

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hfedjxykwwjpfx Abrsc Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: new, ELMAG oil/diesel heating gun with chimney flue TURBOHEAT ODK 32 ADVANTAGES Heating guns with indirect combustion through chimney flue for closed rooms/halls or also for tent heating etc. Combustion with very high efficiency Stainless steel combustion chamber Safety switch-off in the event of flame/fan failure and overheating Desired temperature easily adjustable via rotary knob incl. 10 meter temperature sensor for measuring the room temperature Hfodpfx Ast Hvw Nebrsc TECHNICAL DATA Output 30 kW Air output 1100 m³/h Fuel consumption (heating) 3 l/h Tank capacity 50 l Mains voltage 230 V Flue gas connection Ø 110 mm Air outlet Ø 23 cm Dimensions LxWxH 1080x445x495 mm Weight 26.2 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm Hsdpfx Aboxv Akzorefc - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: new, Year of construction: 2024, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm Hedek Utrpspfx Abrofc hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dohmeyer Cryogenic Spiral Freezer with Pre-freezing Tunnel Dohmeyer's spiral cryogenic freezers are designed for rapid freezing or chilling of food products using liquid nitrogen (LIN – Liquid Nitrogen). They are mainly used in the food industry, especially for products requiring quick freezing such as meat, seafood, pastries, ready meals, and other delicate products. Model: DOH-SPK-D244-W26-E21-LIN-2017 Hfsdowp Uhbepfx Abrjc Type: Cryogenic Freezer Spiral Serial number: 201703033177 Year of manufacture: 2017 Cryogenic gas/operating pressure: LIN / 2…4 bar Compressed air/pressure range: 6…8 bar Power supply: 3x400V + N + PE, 50 Hz Weight: 16,000 kg Pre-freezing tunnel/cryogenic tunnel freezer Brand: ENT Edelstahl- und Nahrungsmitteltechnik Type: CFP 600 Serial number: 03 133/2 Year of manufacture: 2017

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm Hsdpfsf N Nlvsx Abrofc • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 420mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland” Hedegn Hcbjpfx Abrjfc

Year of construction: 2022, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm Hfjdpfx Aef N Nl Djbrec • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes Hfedpfx Abef N Nlrersc • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: excellent (used), functionality: fully functional, Electric water heater Hjdpevbfvhjfx Abrsfc Maximum power - 18kW

Condition: used, mileage: 539,000 km, power: 162 kW (220.26 HP), first registration: 07/2001, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, total width: 2,500 mm, total height: 4,000 mm, loading space length: 7,400 mm, loading space width: 2,400 mm, loading space height: 2,950 mm, Year of construction: 2001, Equipment: ABS, tail-lift, Additional information: * Payload: 4080 kg * Type | First axle: Dunlop * Tyre size | First axle: 265/70 R17.5 * Tyre tread depth inner left | First axle: 50% * Tyre tread depth inner right | First axle: 50% * Maximum axle load | First axle: 4450 kg * Type | Second axle: Dunlop * Tyre size | Second axle: 365/70 R17.5 * Tyre tread depth outer left | Second axle: 60% * Tyre tread depth inner left | Second axle: 60% * Tyre tread depth outer right | Second axle: 60% * Tyre tread depth inner right | Second axle: 60% Hfjdpfx Absxbv I Dorec * Maximum axle load | Second axle: 8500 kg * Wheelbase: 508 cm * Tail lift | Loading capacity: 1500 kg * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tyres | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional equipment: * Anti-lock braking system * Roof spoiler * Electric windows * Homepage * Air suspension * Fog lights * Parabolic suspension * Radio/CD player * Spare wheel * Spoiler * Toolbox * Tow coupling Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please make inquiries in advance regarding costs and procedures specific to your country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to alterations, prior sale, and errors.