Used Pre Heater for sale (46,562)

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,500 h, machine/vehicle number: 2M220888, power: 21 kW (28.55 HP), overall weight: 65 kg, total width: 450 mm, total length: 500 mm, total height: 1,000 mm, control cabinet height: 1,000 mm, control cabinet width: 450 mm, temperature: 95 °C, Equipment: type plate available, Electric central heating system Iisdsqtyrtspfx Agzek Mobile heating and cooling! Heating courier

Condition: good (used), Tricool Thermal oil heater Model: SHK509A Iisdpfx Aerwz N Iegzsk Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile

Year of construction: 1980, condition: good (used), 5 (7) rolls, Ø 160 mm strip width: max. 1.750 mm Iiodpfx Agednztwozsk strip thickness: 0,4 - 3 mm

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2025, Equipment: 4 in one shovel, Infrared Asphalt Heater MIRA-1 Infrared Asphalt Heater MIRA-1 by TICAB TM is compact and powerful device. Best for small patch repairs. It is quite reliable and highly effective in use SPECIFICATIONS: - Propane fuel. - Controls - mechanical. - 2 gas bottles. - Consumption - 5-5.5 kg / h (depending on the outside temperature). - Weight 120 kg. Effective in the repair of: Iodpfsq Rcrqjx Agzjik • Potholes. • Raising manhole and utility covers. • Failed pavement joints. • Joint asphalt repair.

Year of construction: 2020, condition: like new (used), TWK PEGASO ELECTRIC HEATER – MOD. 150 OAF (150 KW) TWK PEGASO 150 OAF electric heater, 150 kW, equipped with 3-way valve, PT100 probe, ZEUS 1.0 touch panel. Excellent condition. Main data: • Brand / Model: TWK PEGASO 150 OAF • Year of construction: 2020 • Power: 150 kW with cooling heat exchanger • Valve: integrated 3-way • Control: 4–20 mA board + 1 PT100 probe • Control panel: ZEUS 1.0 touch screen • Additional features: Integration for remote input Iisdpfxexlkg Nj Agzok Condition: • Electric heater in excellent condition.

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams Iodpodzqblsfx Agzoik For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Included: – Electrical Motor – Springs Iisdpfx Agsg Sty Eezek Vibrating screen can be sandblasted and painted.

Condition: used, Tricool 99 S2/50 chiller 50/S2/1617 stainless combi chiller on mobile skid, also with heating Isdedmn U Aspfx Agzeik

Condition: good (used), Year of construction: 2005, Offer 25190 Technical Data approx.: - max. temperature 400°C - temperature control 0 - 250°C - time automatic 0 - 60 min. Iodjwp Exdspfx Agzsik - working space under the yoke 320 - 200 mm - max. ball bearing weight 250 kg - drive 400 V / 12 kVA - space requirement approx. W 850 x D 600 x H 1150 mm - weight approx. 150 kg - yokes 40 + 50 + 80 mm - mobile base

Condition: used, mileage: 539,000 km, power: 162 kW (220.26 HP), first registration: 07/2001, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, total width: 2,500 mm, total height: 4,000 mm, loading space length: 7,400 mm, loading space width: 2,400 mm, loading space height: 2,950 mm, Year of construction: 2001, Equipment: ABS, tail-lift, Additional information: * Payload: 4080 kg * Type | First axle: Dunlop * Tyre size | First axle: 265/70 R17.5 * Tyre tread depth inner left | First axle: 50% * Tyre tread depth inner right | First axle: 50% * Maximum axle load | First axle: 4450 kg * Type | Second axle: Dunlop * Tyre size | Second axle: 365/70 R17.5 * Tyre tread depth outer left | Second axle: 60% * Tyre tread depth inner left | Second axle: 60% * Tyre tread depth outer right | Second axle: 60% * Tyre tread depth inner right | Second axle: 60% * Maximum axle load | Second axle: 8500 kg * Wheelbase: 508 cm * Tail lift | Loading capacity: 1500 kg * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tyres | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional equipment: * Anti-lock braking system * Roof spoiler * Electric windows * Homepage * Air suspension * Fog lights * Parabolic suspension * Radio/CD player Iiedpfx Agoxbv I Djzok * Spare wheel * Spoiler * Toolbox * Tow coupling Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please make inquiries in advance regarding costs and procedures specific to your country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to alterations, prior sale, and errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. Iodpfju Thhrex Agzjik The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Revolving briquetting press RUF type RBK 55/2500/120 S Hydraulic pellet press or briquetting press for grinding sludge, metal chips, or similar No. 70002 Year of construction 2009 Briquette diameter 120 mm Briquette length in the pre-compactor approx. 120 mm Pressing force in the pre-compactor 30 tons at 260 bar Briquette length in the main compactor approx. 80 mm Iisdpshg Uz Ijfx Agzek Pressing force of the main press cylinder 250 tons at 260 bar Stroke size of the main press cylinder 120 mm Pressing force of the counter-press cylinder 250 tons at 260 bar Stroke size of the counterpress cylinder 15 mm Piston diameter of the main press cylinder 350 mm Press stroke Cycle time approx. 30 sec. for grinding sludge with low residual oil content Hopper size of the screw conveyor 1000 x 600 mm Hydraulic motor power 37 kW Mains connection 400 Volt, 50 Hz, 45 kW - Revolver with 5 stations for high material throughput - Pre-compressor stage for pressing material into the turret disk - 2 opposing main press cylinders with 120 mm and 15 mm stroke - Ejection cylinder for ejecting the finished briquettes from the turret disk - Infinitely variable adjustment of the hydraulic speed for each pressing stage - was used for grinding sludge from metal processing - Material hopper as hopper with screw conveyor - the machine was completely overhauled at RUF in 2018 - a new SIEMENS Simatic touch panel was installed in 2020 - only a few operating hours after the overhaul very good condition Grinding sludge recycling - great savings through cooling lubricant recovery - Large savings in disposal costs due to the reduction in volume and weight of the grinding sludge - Grinding sludge briquettes with a low residual oil content can possibly be classified as "non-hazardous waste".

Condition: used, Thermal system, fan heater -Space-saving fan heater: HVL 031 -Power: 225 W Iijdpfeff Nmfjx Agzsk -Price: per piece -Number: 2 pieces -Dimensions: 90/130/H160 mm -Weight: 0.9 kg/piece

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm Ijdpfxjd D Dh As Agzjik weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece

Condition: used, Vibratory finishing machines Pre-filter system, filter system, pre-filter container, water filter for cylindrical vibrator, vibratory finishing machine, vibratory finishing system, vibratory finishing cylindrical vibrator, Trowal system, continuous vibrator Iodpjigamuofx Agzsik -Pre-filter system: for vibratory finishing machines or others -Transport frame: mobile, with 2 filter inserts -Collection tank: volume approx. 350 litres -Total dimensions: 1400/620/H920 mm -Weight: 106 kg

Condition: used, Thermal systems, fan heaters, heating elements Iodpfoff Nmgox Agzsik -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Condition: used, Thermal system, fan heater, heating elements Iiodpeuqf Hzsfx Agzjk -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

Condition: used, Immersion heater -Power: max. 2000 W -Step switch: 12 positions -Body: made of aluminum Iijdpfx Ageb A Iavszek -Connection: 230 V -Weight: 5 kg

Condition: used, Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm Isdsrkp Nxopfx Agzsik -Weight: 6.2 kg/piece

Condition: used, Original Knecht filter (air filter), pre-filter, pre-cleaner, air filter -Turbo pre-cleaner Iioded Sxg Nepfx Agzjk -Filter with: 76 mm inlet -Dimension: Ø 193/270 mm -Weight: 2.1 kg

Condition: used, Fan heater, mobile heater, gas heater, gas fan Iijdpsb A Hyujfx Agzsk -Power: approx. 30 kW -Dimensions: 620/340/H540 mm -Weight: 20 kg

Condition: used, Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan Iodpfx Agsf Sxbuozsik -Manufacturer: RO/SE fan heater/switch cabinet heater -Type: HH/250s -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

Condition: used, Fan heater, mobile heater, gas heater, gas fan -Power: adjustable 30 kW -Consumption: 2.3 kg/h -Connection pressure: 0.35-1.5 bar Iiodpfxsb A S Dbj Agzsk -Air flow rate: 1000 m³/h -Weight: 21 kg

Condition: used, Fan heater, mobile heater, gas heater, gas fan Isdob A Iwaopfx Agzeik -Power: adjustable 50 KW -Connection pressure: 0.35-1.5 bar -Air flow rate: 1000 m³/h -Weight: 20 kg

Condition: used, Fan heater, mobile heater, gas heater, gas fan -Power: adjustable: 24.3 to 64 kW -Consumption: 1.5 to 5 kg/h Iiedob A S A Tspfx Agzjk -Connection pressure: 0.6-3.0 bar -Air flow rate: 2150 m³/h -Weight: 30 kg