Used Prepress Interface for sale (4,164)

Year of construction: 2008, condition: ready for operation (used), This Arburg Allrounder 520A 1500-400 was manufactured in 2008. It features Selogica direct control, small accumulator hydraulics, and a thermoplastic processing capability. Equipped with multiple core pulls and a robot system interface, it's ideal for precise, automated molding operations. Consider the opportunity to buy this Arburg Allrounder 520A 1500-400 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Fsdoxu Rv Aopfx Ah Uegi Injection Moulding

Condition: excellent (used), Type: VT 4004 Vötsch Temperature Test Chamber, Air-Cooled Temperature Range: -40°C to +180°C 37 liters Temporal Temperature Fluctuation in the Usable Volume: ±0.2 K to 0.5 K Spatial Temperature Deviation: ±0.5 K to 1.5 K, corresponding to a temperature gradient of 1 K to 3 K Temperature Rate: Temperature change rate according to IEC 60068-3 Heating: 5.3 K/min Cooling: 6.0 K/min Heat compensation: max. 550 W Calibration values: +23°C and +80°C Technical Description VTM 4004 Installation and Operation Data: Test chamber internal dimensions: Width 320 mm, Depth 290 mm, Height 400 mm External dimensions: Width 1000 mm, Depth 780 mm, Height 630 mm Test Chamber: Floor load capacity: 200 kg/m² Point load: max. 15 kg Test chamber lighting: Halogen lamp 20 W, only with additional equipment “door with viewing window” Port openings: 3x port openings 2x diameter 50 mm, installed left side 1x diameter 80 mm, installed left side Refrigeration unit: low-noise, fully hermetic refrigeration, air-cooled Control terminal: Mincontrol Backlit display Plain text display Password protection Input for setpoints; access to stored test programs Temperature limiting software for minimum and maximum chamber temperatures Plain text error messages Control system: Microprocessor-controlled regulation and monitoring system MINCON/32 Fgodpsxt D Aysfx Ah Uei 32-bit technology Integrated program controller Fault diagnostic system Program memory for 100 programs with a total of 1000 segments, 250 loops and 9999 cycles RS 232 interface Communication with user’s PC Networking of up to 32 devices optionally possible via RS 485 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 0.7 kW Rated current: 4.0 A Refrigerant: R-404A Weight: 115 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors) If you have further questions, we will be pleased to answer them by phone.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Fgjdpfjr Hbf Tsx Ah Uji Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: like new (used), Year of construction: 2015, operating hours: 15,000 h, functionality: fully functional, Year of manufacture: 10-2015 Control: OSP P300S Maximum turning diameter: 650 mm Main spindle Drive power: 32/22 kW Max. spindle speed: 3,000 rpm Max. torque: 955 Nm Spindle nose: A2-11 Spindle bore: 112 mm Hollow clamping cylinder SMW-VNK225-95, bore 95 mm Sub spindle Drive power: 26/22 kW Max. spindle speed: 4,000 rpm Fedpfx Ahoxu Awls Usgi Max. torque: 420 Nm Spindle nose: A2-8 Bearing inner diameter: 80 mm Solid clamping cylinder SMW SIN-S175 Milling spindle Drive power: 22/18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.001° HSK-A63 Travel paths X1/X2-axis: 695/235 mm Y-axis: 300 mm Z1/Z2-axis: 1,600/1,524 mm B-axis: -30° to +210° Tool magazine / ATC 80 tool positions Max. tool diameter: 90/130 mm Max. tool length: 400 mm Lower turret 12-position tool turret Turning tool: 25 mm Boring bar: 40 mm Special equipment Software for limiting spindle speed to 3,500 rpm Software for multifunctional tools Software extension kit One Touch IGF-M-D Machining Navi M-g for milling operations Tool breakage detection – Renishaw TRS2 laser Machine-side preparation for high-pressure coolant 70 bar Factory-installed door automation Robot interface (Type “E”) Connection for oil mist extraction Separate coolant filtration system TMF300/980, drum-type swarf filter, clean tank 980L Chip conveyor Standard equipment Lower turret with 12 stations, direct mounting system "radial", with cylindrical roller guide on ZB-axis, sliding guide on XB-axis Collision avoidance system (CAS) in real time 19'' color LCD TFT with 3D color graphics as touch screen Second operating system Windows 7 for operation and open data communication, freely usable for Windows 7 compatible applications Tool monitoring system for service life and breakage+ Tool measuring device Machine management MacMan with integrated BDE Ethernet interface with browser and DNC-T1 for program transmission Prepared for remote diagnostics Harmonic spindle speed oscillation by periodic speed variation Tool height correction in Y-axis for rotating tools Circular thread milling X/Z/Y/B including eccentric milling X/Y/C Hi-Cut Pro high-speed control for rotary tools Coordinate transformation Electronic spindle orientation Dimensions and weight L/W/H: 4,480/3,082/3,030 mm, Weight: 18,000 kg

Condition: used, Year of construction: 2013, functionality: fully functional, HWACHEON - Cutex 160 B Offer Details Stock Number: 1039-9338 Machine Type: CNC Lathe Manufacturer: HWACHEON Model: Cutex 160 B Year of Manufacture: 2013 Control System: Fanuc Oi-TD Location: D-59302 Oelde Country of Origin: Korea Delivery Time: by arrangement Freight Terms: ex location Additional Information: CNC Lathe HWACHEON - Cutex 160 B Operating Hours: - Control on: approx. 26,932 h - Machining time: approx. 7,546 h WE OFFER YOU: - Workshop-inspected machines - Free loaded on truck - NO auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter max.: 300 mm Fgjdpext N I Isfx Ah Uji Turning length max.: 284 mm Control: Fanuc Oi-TD Swing diameter over bed: 550 mm Chuck diameter: 210 mm Spindle nose: A2-6 Main Spindle: Max. speed: 4,500 rpm Spindle bore: 62 mm Bar capacity: 51 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel: X-axis travel: 170 mm Z-axis travel: 335 mm Tool Turret: Number of tool stations: 12 positions Tool size: Ø25 x Ø40 mm Feed Rates: Rapid traverse (X / Z): 36 / 36 m/min Tailstock: Quill diameter: 60 mm Quill stroke: 80 mm Tailstock taper: MT 4 Total power requirement: 25 kVA Machine weight approx.: 3.2 t Space requirement approx.: 8.5 x 2.5 x 2.0 m Accessories - Documentation - Chip conveyor - Coolant system - Tailstock - Signal lamp - Parts catcher - Hydraulic unit - 3-jaw chuck: SEOAM CAH-08 - Collet chuck: HAINBUCH nova size 65 - Tool measurement - Interface for bar feeder - Bar loading magazine: Breuning SIMAG 70.1-3000 - Various toolholders

Condition: excellent (used), Year of construction: 2004, MAZAK QUICK TURN NEXUS 200MS-Y Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol 640T Nexus - KITAGAWA three-jaw chuck BB-208 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 fixed tool holders - 2 driven tool holders Fodpfxsw Du S Ao Ah Uegi

Year of construction: 2004, condition: ready for operation (used), This DEMAG Ergotech System 150/500-840 was manufactured in 2004. It features a complete injection unit with a ø50mm and ø60mm bimetal screw, both highly wear-resistant. Equipped with four hydraulic core pullers, a pneumatic valve, and a Euromap interface for handling. Consider the opportunity to buy this DEMAG Ergotech System 150/500-840 hydraulic injection moulding machine. Contact us for more information about this machine. Fedpfx Ahexvfkde Usgi Application Types Injection Moulding

Condition: excellent (used), Cycle Lathe Weiler E 50 / 1D Year of manufacture: 1999 Machine no.: 684 Control: Weiler (Siemens 810D) Power-on hours: 43,543h (Machine was overhauled by Schmeißer a few years ago) Technical specifications: Spindle speed: 1–625 / 4–2,500 rpm (2 gear stages) Drive power: 17kW torque Spindle torque: 1,200Nm Spindle bore: 66mm Distance between centers: 1,000mm Center height: 280mm Swing diameter over bed: 570mm Swing diameter over cross slide: 340mm Equipment/Accessories: - Interface for external programming - Parat tool holder incl. 6 holders - Operating manual Fsdpfx Aowtqnrsh Usgi - Coolant system - Various turning tools and drills - Jaws for lathe chuck - Live center - Machine feet The machine has been tested under power and is in perfect, ready-to-use condition. The machine bed is also in good condition. Price: net ex works, loaded on truck from stock.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Fgsdpfer Hbf Ejx Ah Uji Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations Fgodewz Rifjpfx Ah Usi - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 50 T Offer Details Stock number: 1039-9277 Type of machine: Universal Machining Centre Manufacturer: DECKEL MAHO Model: DMU 50 T Year of manufacture: 1998 Control: TNC 426M Heidenhain Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex site Additional information: CNC Universal Machining Centre DECKEL MAHO - DMU 50 T - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manual via handwheel) WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Travel (X-axis): 500 mm Travel (Y-axis): 400 mm Travel (Z-axis): 400 mm Control: TNC 426M Heidenhain Main spindle: - Speed range (main spindle): 20 – 9,000 rpm - Drive power (main spindle): 9 / 13 kW - Max. torque: 57 / 82 Nm - Tool interface: ISO 40 DIN 69871 Swivel rotary table: - Table size: 700 x 500 mm - Swivel angle (B): 105° (-10°/+95°) manual - Rotary axis (C): 360° manual - Max. table load: 200 kg - Number of T-slots: 7 - T-slot pitch: 63 mm - T-slot width: 14H7 mm - Center bore: 30H7 mm Tool changer: - Tool magazine positions: 16 - Tool holder: ISO 40 DIN 69871 - Max. tool length: 290 mm - Max. tool weight: 6.0 kg - Max. total tool load: 50 kg Feeds: - Feed rate: max. 10,000 mm/min - Rapid traverse: 12 m/min - Programming increment: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m Equipment - Documentation - Chip tray - Coolant system - B-axis manual - C-axis manual - Swivel rotary table - Tool changer (16 positions) Fjdpext Eyyofx Ah Ujgi - Electronic handwheel - Operating Mode 4

Year of construction: 2022, condition: used, functionality: fully functional, This listing features the latest generation of the VarioCooking Center, the iVario Pro XL 150-litre unit from the premium manufacturer Rational (successor to the VCC 311). The unit has been inspected and serviced in our in-house specialist workshop and is in full working condition. Manufacturer’s recommended retail price for this configuration: approx. €30,849 net. Rational VarioCookingCenter iVario XL 150L Features: - Equipped with WIFI / Balanced Power - 3NAC 400 V 50-60Hz - Capacity: 59 dm² / 150 litres - Meals per batch: 100–500 - Approval ID: LMX.100.DE - Country of installation: Germany - Balanced Power - iZone Control - Low-temperature cooking - Socket (Type F) - WIFI - USB interface (standard) - Base with 150mm plastic feet - Hand shower with automatic retraction - Protection: 3 x 63A - Recommended cable cross-section: 5 x 10mm² Fedpfx Asxuihwjh Uegi Technical Data: - W x D x H: approx. 1,635 x 894 x 1,078 mm - Electrical connection: V: 400 / kW: 34 / Hz: 50 - Capacity: 150 litres - Weight: 245kg - Serial number: E31VK22118068154 - Year of manufacture: 2022 - Condition: Used, tested, fully operational Accessories for the iVario XL are available at additional cost upon request. An invoice with VAT shown separately will be issued. Please note: sample photos are used; original images will follow shortly. Unit available from week 46. Highlights: - iCookingSuite: intelligent cooking assistant with 6 operating modes (meat, fish, vegetables and side dishes, egg dishes, milk and desserts, soups and sauces) and 5 cooking methods (boiling, roasting, deep-frying, braising, and finishing) - iZoneControl: flexible division of the pan base into zones with different temperatures - Low-temperature cooking (including overnight), confit, sous-vide - Vario Cooking Control mode: select the desired result at the touch of a button (e.g. from light to dark) - VarioBoost: patented heating system ensuring absolutely uniform and precise temperature transfer - Programming mode: create manual programs and manage cooking processes - Integrated WiFi module for connection to ConnectedCooking Additional Features: - Integrated 230V socket - Integrated hand shower with automatic retraction and spray regulation - High-quality pan base - Seamless with rounded corners - Core temperature sensor with 6 measurement points - 1,200 programs, each programmable and nameable with up to 12 steps - Integrated hose spray, integrated water drain in the pan - Temperature unit adjustable in °C or °F - Tilting pan - Lid with integrated water inlet - Automatic service message display - IPX5 water jet protection - USB interface for HACCP data export and updates - Including base with plastic feet Functions: - Manual mode (30°C–250°C): set liquid temperature, pan base temperature, oil temperature, automatic precise water filling by volume, delta-T cooking - Auto Lift: basket lifting and lowering device (for boiling and frying baskets) – Frying function is locked but can be unlocked. Service: We are happy to assist in arranging certified Rational customer support throughout Germany. Shipping: Delivery or self-collection by arrangement. Worldwide shipping available on request. Delivery to islands or mountain stations only by prior agreement. Contact us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00.

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand SIEMENS Model SINUMERIK 840 D sl Additional Equipment Measuring System: Linear in both axes This 5-axis Pittler PV2500 was manufactured in 2021, featuring a CNC vertical lathe with a maximum swing diameter of 3,000 mm and a turning diameter of 2,800 mm. It includes a double tool holder with Capto C8 interface, high-pressure coolant capabilities, and a robust spindle supporting up to 25,000 kg load. Ideal for complex, large-scale machining tasks. If you are looking to get high-quality turning capabilities consider the Pittler PV2500 machine we have for sale. Contact us for more information. Fedpfjxuw Aiex Ah Uegi Application Types Turning

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible Fsdpfx Ajd Etadsh Uegi The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Fgjdpfexur Iaex Ah Usi Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 Fgjdpfxsh Hvk As Ah Uoi spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, Year of construction: 2007, functionality: fully functional, SCHÜTTE - SG 18 Offer Details Stock No.: 1039-9273 Machine Type: Multi-Spindle Automatic Lathe (Bar Automatic) Manufacturer: SCHÜTTE Model: SG 18 Year of Manufacture: 2007 Control: Siemens Location: D-59302 Oelde Country of Origin: Germany Delivery Time: By arrangement Freight Terms: Ex-works Additional Information: CNC Bar Turning Automatic Lathe SCHÜTTE - SG 18 - Co2 fire suppression system Kraft&Bauer - Ruez drag link conveyor - IEMCA bar loader PRA 52 42 F - Tooling package - Cam set - Various clamping devices WE OFFER: - Workshop-inspected machines - Free-on-truck loading - NO auction fees - Possible delivery (at extra cost) - Unloading and commissioning (at extra cost) Technical Data Turning diameter: 18 (16) mm Turning length: - mm Control: Siemens Spindle pitch circle diameter: 180 mm Bar feeder stroke: max. 80 mm Longitudinal slide travel: 50 (63) mm Cross slide travel: 20 (32) mm Spindle speed: 800 - 8,000 rpm Fsdpfx Ahjxt Emas Uegi Main spindle drive power: 11 kW Torque: 18 Nm Space requirement approx.: 6.0 x 1.5 x 2.2 m Machine weight approx.: 5.5 t Included Accessories - Documentation - Chip conveyor - Coolant system - Parts discharge - Signal lamp - Interface for bar loader - Bar loading magazine IEMCA PRA 52 42 F - Hydraulic unit

Condition: used, functionality: fully functional, machine/vehicle number: E31VK25088094112, Year of construction: 2025, This is the latest generation of the VarioCooking Center, the iVario Pro XL 150 liter, from the premium manufacturer Rational (successor to the VCC 311). The unit has been inspected and serviced in our in-house specialist workshop and will be supplied with a full manufacturer’s warranty starting from commissioning. Manufacturer's recommended retail price in this configuration: approximately €25,810 Rational VarioCookingCenter iVario XL 150L equipment: - with WIFI / Balanced Power - 3NAC400 V 50-60Hz - Capacity: 59 dm² / 150 liters - Meals per batch: 100–500 - Approval ID: LMX.100.DE - Country of installation: Germany - Balanced Power Fjdpfsxuia Hjx Ah Uogi - iZone Control - Low temperature cooking - Socket (Type F) - WIFI - USB interface (standard) - Stand with plastic feet 150mm - Hand-held spray with automatic return - Protection: 3 x 63A - Recommended cable cross-section: 5 x 10mm² Technical data: Dimensions (W x D x H): approx. 1635 x 894 x 1078 mm Power supply: 400V / 34 kW / 50 Hz Capacity: 150 liters Weight: 245 kg Serial number: E31VK25088094112 Year of manufacture: 2025 Condition: used, inspected, fully functional Accessories for the iVario XL are available upon request at an additional cost. You will receive an invoice with VAT shown separately. Sample photos are shown – original images coming soon. The unit will be available from calendar week 46. iCookingSuite – intelligent cooking assistant with 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, dairy and sweet dishes, soups and sauces; or 5 cooking methods: boiling, frying, deep-frying, braising and finishing iZoneControl: flexible allocation of the pan base to zones with different temperatures Low-temperature cooking: (including overnight), confit, sous-vide Vario Cooking Control mode: select desired cooking result at the touch of a button, e.g. from light to dark VarioBoost: patented heating system for absolutely even and precise temperature transfer Programming mode: create manual programs and manage cooking processes Integrated WiFi interface, e.g. for connection to ConnectedCooking Further details: - Integrated 230V socket - Integrated hand shower with automatic recoil and spray adjustment - High-quality pan base - Seamless finish with rounded corners - Core temperature sensor with 6 measuring points - 1,200 programs, each programmable with up to 12 steps - Integrated hose shower on the device, integrated water drain in the pan - Temperature unit adjustable in °C or °F - Tilting cooking pan - Lid with integrated water inlet - Automatic service notification display - IPX5 water jet protection - USB interface for HACCP data export and updates - Including base frame with plastic feet Functions: Manual mode (30°C-250°C): - Set liquid temperature - Set pan base temperature - Set oil temperature - Automatic, precise water fill (by the liter) - Delta-T cooking Auto Lift: raise and lower devices (baskets for boiling and frying). The frying function is locked but can be activated. Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by arrangement

Condition: used, functionality: fully functional, mileage: 83,890 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,165 kg, maximum load weight: 1,335 kg, first registration: 08/2022, next inspection (TÜV): 06/2027, loading space length: 4,000 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, machine/vehicle number: DEG-BZ17, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, power assisted steering, sliding door, soot filter, truck registration, Special equipment: Audio system: Radio with Bluetooth/audio interface MP3 + DAB+, vehicle key (2) both foldable, rear wing doors without glazing (opening angle 270 degrees) Fjdpfexvc Ersx Ah Usgi Additional equipment: Driver's airbag, driver assistance system: hill start assist, generator 180 A, body/design: high-roofed van, body variant: vehicle length L4, body variant: high roof (H2), L4H2, 3.5 t, reinforced, closed cargo area partition (without window), adjustable steering column (steering wheel), engine 2.2 L - 103 kW CDTI, wheelbase 4035 mm, low emission according to Euro 6d standard, steel wheels 6x16, interior trim in the load/FG area: half-height

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Fodped Etagofx Ah Uogi Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: good (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder DIN 2080: ISO 40 Travel distances: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Spindle speed range: 50 - 4000 rpm Infinitely variable feed rate: 5 - 2000 mm/min Rapid traverse on all axes: 8 m/min Swiveling vertical milling head: ± 90° Manual quill stroke adjustment: 80 mm Drive power: 7.5 kW Fsdpjxtu H Nofx Ah Ujgi Dimensions L x W x H: approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • HEIDENHAIN HR 410 electronic handwheel • SIEMENS AC servo drives • Data interface V 24/ RS 232 • Swiveling vertical milling head ± 90° right & left with quill adjustment • Hydraulic tool clamping vertical + horizontal SK / ISO 40 • Swiveling device for vertical milling head • High speed range up to 4,000 rpm • Vibration-free operation due to stable and heavily ribbed cast-iron guides • Ball screws for X, Y, and Z axes • All electrical controls located on one side in movable control panel • Fixed angular table with foldable chip guard • Coolant system integrated in machine base • Hydraulic unit • Central lubrication • CE-compliant Operating hours: 17,256 Spindle hours: 3,816 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Media Chip conveyor Yes Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA 15 bar pump with filter This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Fodpfx Aexuaxmjh Uogi Turning

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life Fedpfext Dq Rex Ah Uogi - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: ready for operation (used), Year of construction: 2021, We have a Mueller Apparatebau 8300 envelope inserting system available. Fgodoxggtzjpfx Ah Uji This system is in 2021 fully rebuilt and sold by Mueller Apparatebau.... This envelope inserter is equipped with a high speed single sheet channel with vacuum, 5 insert feeders, 2 of these selective and 1 with matching. This complete system can still be modified to your exact needs! The Müller MK8300 Multiformat Inserting System stands for high-quality and secure inserting of confidential documents as well as for processing different envelope formats. Thanks to simple and fast job set-up for format changes and ultimate flexibility due to the modular design, the Müller MK8300 adapts perfectly to increasingly complex applications. In particular, the multi-channel system from Müller, which is freely configurable from 2 to 15 stations, enables this unique flexibility. This allows multi-channel applications with reading and enclosures to be produced in any order. Whether as a cut-sheet or from the web, with or without reading, un- or prefolded enclosures – almost anything is possible. Nearly all transaction applications from personalized large and small jobs to direct mail applications can be handled with the Müller MK8300. The intuitive Müller software provides the necessary security and guarantees complete traceability throughout the entire production process. Configuration flexibility • customer-specific system design Dynamic speed • automatic speed adjustment Envelope flexibility • largest selection with all intermediate formats Process control • document monitoring and Camera Job Control Flexible processing • cut-sheet and continuous or mixed processing Performance Müller MK8308 Müller MK8306 8.000 (DL - C4) 6.000 (DL - C4) Document Cut sheet (optional cutters) (60) 70 - 130 (170) g/m² 15.000 - 40.000 documents/h Processing Cut sheet White paper management Face down, foot first, A-Z (= standard) Folder All types of fold up to 8 sheets Interface Central screen & local displays Document monitoring Interface for productions management systems (PMS) Enclosures DL: Min. 98 x 190 mm, Max. 115 x 227 mm C5: Min. 98 x 190 mm, Max. 155 x 227 mm C4: Min. 200 x 280 mm, Max. 220 x 307 mm (40) 60 - 200 (250) g/m² 1.500 sheets Envelopes DL: Min. 105 x 200 mm, Max. 120 x 240 mm (h x w) C5: Min. 150 x 200 mm, Max. 162 x 240 mm (h x w) C4: Min. 218 x 300 mm, Max. 250 x 345 mm (h x w) 70 - 120 g/m² 1000 envelopes 12 mm filling capacity

Condition: ready for operation (used), Year of construction: 2004, operating hours: 24,998 h, General Data Machine weight 6500 kg Control Unit Brand HEIDENHAIN Model ITNC530 Main Drive Spindle speed range 24000 Tool taper HSK-A63 Number of axis 3 Fjdpfsxua Axox Ah Uogi This 3-axis MIKRON HSM 800 was manufactured in 2004. It features a 24,000 rpm spindle, HSK A 63 interface, and ITNC530 control. Equipped with a tool changer, protective cabin, chip conveyor, and band filter system. Includes a pallet changer and vacuum docking table. If you are looking to get high-quality milling capabilities consider the MIKRON HSM 800 machine we have for sale. Contact us for more information about this machine. Application Types Milling