Used Production Printer for sale (17,613)

Condition: excellent (used), Bottle Inspection Station For manual, visual quality control of bottles before filling or level checking. - Stainless steel housing - With backlighting Dkjdpfsy T I Euox Al Ujn - With top lighting - Power: 230 V - With two brackets for direct mounting on the bottle conveyor belt - In very good condition Dimensions: - Height: 560 mm - Length: 1000 mm - Width (bottom): 90 mm - Width (top): 240 mm

Condition: used, offer for central drum flexo press FLEXOTECNICA NG10 from year 2009 with 1280 mm web width Dkedpfjy Sfcnjx Al Uen

Condition: excellent (used), Vemag Sausage Production Line Vemag Vacuum Filler -Type: HP20E -Power: 23 kW -Operating Hours: 4174 Dkedpfx Aex Rbdfol Usn -Year of Production: 2020 -With Loading -With Technical Documentation -Condition: Used in very good condition, ready to work Precision Sausage Portioning, Joining, and Separating Device -Type: FSL 210 -Power: 7 kW -Capacity: Up to 800 Portions/Min -Year of Production: 2020 -Weight: 548 kg -Condition: Used in very good condition, ready to work Automatic Portioning Device -Type: MMP220 -Power: 1.5 kW -Portion Size: 100 - 3000 g -Year of Production: 2020 -Weight: 335 kg -Condition: Used in very good condition, ready to work

Year of construction: 2020, condition: used, Bell-Mark Thermal Printer RF Pouch Printer, Type East Print 111 128, Model No. EP41015R, prints full rear bag artwork including barcodes to clear scannable quality. S/No. 20572763 (2020). Country of Origin: U.S.A. Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dksdpfoy Rzriex Al Uon

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Dsdpfjy Tav Eox Al Ujkn

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Year - 1980 Line Consists : 1.Wire drawing machine SKP8 T.I. 95647 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P Serial Nr 9564/7 1.3. Year of production 1995 -1999(depends on condition) 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Year of production 1978-1981 3.3. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Year of production 1978-1981 4.3. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production Dksdpfsyfg Tgox Al Uen 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: used, Year of construction: 1987, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Line Consists : 1.Wire drawing machine SKP8 T.I. 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P 1.3. Year of production 1995-1999 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Model MS6 3.3. Year of production 1986-1989 3.4. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Model MS6 4.3. Year of production 1986-1989 4.4. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 Dkedpfx Asyf Drmsl Uen 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm Djdpfxeyc Rtxo Al Uekn - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg Djdpfx Aoyc R U Ael Uokn - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line includes: • Main Extruder: BA105 AMUT, year of manufacture 2004 • Single-screw Co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Raw material pneumatic conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Discharge table _____ TECHNICAL DATA – BA105 AMUT Extruder Dodpfxsyc R Aaj Al Uokn • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 RPM • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Venting: 2.2 kW pump, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (total 1:25) • Belt type: 3VX600 (4 pcs.) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines are complete and fully operational Ready for profile production using co-extrusion technology Possibility to sell one or both lines, depending on buyer’s requirements On-site inspection available. Documentation and photos provided. It is possible to purchase one line for €80,000.00

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm Dsdpfsy Ug Ecjx Al Uekn - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: new, A complete pallet production line. Djdowduudjpfx Al Ujkn Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 4/LP-OM/Leg positioning system/1 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, PRICE 95,000 EUR (excl. VAT) SERVICES INCLUDED IN THE PRICE: Wooden crate suitable for international container shipping Inspection and demonstration under power prior to payment, at our facility in Belgium Sample print during inspection, upon request On-site installation and commissioning by personnel with previous certified experience on Massivit systems, included for EU destinations. (For non-EU installation, availability is subject to location and prior agreement — please enquire.) On-site operator training by personnel with previous certified experience on Massivit systems at the buyer's premises (EU destinations included; non-EU subject to prior agreement), or alternatively at the seller's facility in Belgium (max. 2 persons, max. 5 days) — available for all buyers 6-month warranty on refurbished mechanical components: dispensers (stators, bearings, couplings), pump stator, dispenser seals, gel filtration system 12 months remote technical assistance via WhatsApp, email or video call, including operation support, g-code guidance, print parameter optimisation and general technical advice DESCRIPTION Large-scale industrial 3D printer Massivit M1800 Pro, model year 2018, professionally refurbished and operational and testable under power. The machine can be inspected and tested under power by appointment at our facility in Belgium. Sample prints available upon request. On-site installation and operator training are included for EU destinations and delivered by personnel with previous certified experience on Massivit systems, supporting setup, calibration and commissioning. For non-EU destinations, please enquire. Training at the seller's facility in Belgium is available for all buyers (max. 2 persons, max. 5 days), covering installation procedures, operation, routine maintenance, software usage and basic troubleshooting. Post-sale remote technical assistance included for 12 months. The machine is equipped with dual independent printheads and offers a build volume of 145 × 111 × 180 cm, making it suitable for the production of oversized parts, moulds, master models and display elements. The system operates with GDP (Gel Dispensing Printing) UV-cured technology, enabling high-speed manufacturing of large components with reduced support requirements, lower material consumption and reduced post-processing time. REFURBISHMENT DETAILS Dispensers refurbished: new stators, bearings and couplings Hydraulic pump refurbished: new stator installed Dispenser seals and rubber wear components replaced Gel filtration system refurbished: new filters installed UV curing modules tested and calibrated XYZ belt tensioning and full table alignment performed DisplayPort cables and left head camera replaced Software updated to Massivit Smart Printer v5.0.3, BIOS/OS verified Complete system alignment, calibration and functional testing performed before sale Standard equipment included: 2 × nozzles 2.6 mm, 2 × nozzles 1.8 mm, grease gun Software license dongles included (Massivit Printer + Massivit Slicer) Machine available for collection in Belgium (EXW — Ex Works). Loading, handling and transport are at the buyer's cost. Dkodpfjxx S Diex Al Ujn

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. The production line also includes a testing station. According to our checks, all required documentation is available. Dodpfx Aljy H H N Eo Uskn Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? For more information or contact options, please reach us via the contact form.

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Dedpfx Alsxhgl To Uekn Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, total length: 1,740 mm, total height: 1,960 mm, total width: 1,425 mm, overall weight: 200 kg, input voltage: 230 V, Modix Big Meter 3D Printer for Sale Professionally assembled and fully built up. Purchased for a large-format print project, which has now been successfully completed, making the printer surplus to our requirements. Dksdjy R U Nhepfx Al Usn Currently equipped with a Titan Aero extruder and an E3D Super Volcano hot-end upgrade, along with additional cooling enhancements. The printer supports dual extrusion and includes a second Titan Aero extruder. The current configuration can print up to 6kg per 24 hours per nozzle with 1.75mm PLA filament. The printer is fully enclosed and features a heated bed divided into three individually controlled sections. PEI bed surface sheets are in very good condition, and a new spare set of PEI sheets is also included. A selection of 1.4mm spare nozzles for the upgraded Super Volcano hotend is provided. Software package includes slicer profiles and macros. Additional upgrades and equipment: - Integrated CCTV camera for remote monitoring - Automatic fire extinguisher system with thermal cut-out for unattended operation - Power consumption meter installed - 7-drawer tool cabinet with tools and spare parts included The printer is located in Zaandam (near Amsterdam) and ready for collection. Delivery of the fully assembled printer can be arranged within the Netherlands and neighboring countries at an additional cost of €1 per kilometer each way. Price excludes VAT / BTW (where applicable).

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material mixer from a pellet production line. Thanks to the mixer, the raw material fed into the pelletizers is homogeneous. Capacity of the line in which the mixer was used: approximately 8 tons/hour. Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Dedpfxewxatbe Al Uskn Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Rib diameter: approximately 1400 mm, 22 kW motor, Mixer price: 23,000 Euros, We offer a bag filter for the mixer, visible in the photos of the production line. Filter price: 7,000 Euros, The machine can be viewed in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SLM250182820, Year of construction: 2018, total length: 110 mm, total width: 100 mm, laser power: 250 W, laser wavelength: 1,070 nm, type of cooling: air, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser System Laser type: Fiber laser Laser power: 250 W Wavelength: 1,070 nm Spot size: 40 µm Cooling: Air cooling Process Chamber Process atmosphere: Low-oxygen environment Shielding gas: Argon / Nitrogen Max. extraction system flow rate: 190 m³/h Coating System Coater: Precision coater with rotary guide Coating blade: Steel, rubber, or brush system Micrometer screws: For optical alignment of the coater MACHINE DETAILS Printing Process: SLM (Selective Laser Melting) process Operation Control model: 12" Microsoft Surface Pro 3 tablet Control type: Tablet-based control and monitoring Dodpfxey Sm D Ho Al Uokn Build Volume and Powder Reservoir Build volume: 100 mm x 110 mm Reservoir volume: 110 mm x 200 mm EQUIPMENT Integrated extraction system Cartridge system for quick and safe metal powder replacement Monitoring and adjustment of process parameters Cloud manufacturing technology Accessories as shown in the images

Condition: excellent (used), Year of construction: 2024, operating hours: 992 h, functionality: fully functional, machine/vehicle number: 20240250, overall weight: 6,000 kg, For sale: BOXMATIC Manual 25 DCFM-D – a semi-automatic machine for producing regular corrugated cardboard folding boxes with cutting capabilities. It is an ideal solution for companies requiring flexible production of corrugated cardboard boxes with frequent order changes. The BOXMATIC Manual 25 model is designed for the professional and efficient production of basic types of folding boxes, with the option of additional die-cutting (e.g., cutting hand holes, cross boxes), particularly FEFCO 02 and FEFCO 03 types made from single, double, or triple-wall corrugated cardboard. The machine can also produce dividers or simply score and cut the cardboard. The machine performs excellently in short and medium runs (10–5000 units), offering quick changeovers and a wide range of produced formats and FEFCO box types. Key advantages: - Cardboard handling: single, double, and triple-wall (2–12 mm) - Max. sheet width: 2500 mm - Output: 300–600 units/hour, up to 2300 units/hour in multi-product mode - Quick setup and production change (approx. 5–10 minutes) - Wide range of FEFCO box types - Flexographic printing and additional die-cutting options - Ideal for producing large formats - Excellent value for money Djdpfxoy Tv N Ie Al Uekn Technical specifications: - Weight: approx. 6000 kg - Length: 3070 mm - Width: 2820 mm - Height: 1710 mm - Power supply: 400 V / 50 Hz - Power: 19 kW

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, CARTON CUTTING AND CREASING MACHINE LCR VISION 2800 Technical features and options Production rate: 7/8 boxes/min Dedjy T Evdopfx Al Ujkn Group positioning time: 7 to 12 sec Max. cardboard width: 2800 mm Max. cardboard length: unlimited Single-fan-fold cardboard/sheets Cardboard types: A, B, C, K, BA, BC, EB, single/double flute Operator panel Thickness: 2 to 7 mm CAD/CAM system with a library of FEFCO/LCR box designs Function to acquire production lists by uploading/downloading from a host system (AS400, SAP, SQL)

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: A40 1438, DIMAC Packaging Star F30 USED DIMAC Star F30 packer & thermo tunnel used for bottle packaging (3x2, 3x3, 4x3) 2003 Year - Currently machine is stored in WH. Also for SALE LINKER CSW-30 & BTG-1M €19,000 PACKER SHRINK WRAPPER LINKER EUROPA SP z o.o. SERIAL SW-001/03/2007 YEAR 03/2007 CAPACITY 30 cases / minute +Thermo tunnel for transparent & printed shrink foil THERMOTUNNEL Dodetyu N Ejpfx Al Uskn MANUFACTURER TERMO-PAK MODEL BTG - 1M SERIAL 3755 YEAR 11/2016 CAPACITY up to 7200 bph

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 Dodpfjy I Sd Rox Al Ujkn White Room Mangle Dimensions 5500x2800 mm

Condition: excellent (used), Year of construction: 1998, operating hours: 1,830 h, functionality: fully functional, Please submit your price offers. Schroeder solid hardwood flooring production line. It has only operated for 1830 working hours (1 year with one shift). Fully functional, with a working speed of 30 m/min. The line consists of: Feeder, Planer I, transfer, Planer II, transfer/turntable, End matcher. Dimensions of the processed elements: width 45-100mm, thickness: 10-23mm, length: 250-1200mm. Dsdpfjywkdzjx Al Ujkn

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Manufacturer APV TYPE / Year 35 / 1997 Capacity 8000 Kg /h Working Pressure 16 bar Dedpfxsquuxuo Al Uokn Max working temp 95 *C

Condition: refurbished (used), functionality: fully functional, total length: 2,772 mm, total height: 1,683 mm, total width: 2,027 mm, overall weight: 2,869 kg, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys F900 3D printers are available immediately. Each machine undergoes comprehensive inspection according to strict guidelines, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new equipment. Dkodpfx Aeytckqsl Usn The machines vary in year of manufacture, configuration, and operating hours. Detailed information regarding condition and price range is available upon request. The Stratasys F900 is an industrial large-format FDM 3D printer featuring a build volume of 914.4 x 609.6 x 914.4 mm. This machine is suitable for functional prototypes, end-use parts, and production tooling. It offers high precision, repeatable print results, and dependable production throughput. More than 25 materials can be processed.