Used Profile Forming for sale (11,286)

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included Godszqhgdspfx Af Ajka * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: new, Year of construction: 2026, KRBS 101: Combined tube, profile, and belt grinding machine Convenient operation thanks to easily adjustable clamping device The rotatable clamping jaws of the clamping device enable secure clamping of square tubes, round tubes, and flat steel Adjustable grinding angles from 30 - 90° and from 0° - 60° The optimized quick-change holder allows the clamping roller to be easily and quickly replaced without tools Particularly durable thanks to larger and improved roller bearings Practical clamping roller holders integrated in the base Extensive range of clamping rollers for grinding various tube diameters available as accessories Quick changeover between tube grinding and belt grinding possible Powerful motor Almost all settings can be carried out without tools (operating tool included) Large, foldable protective screen with optimal field of vision Two belt speeds allow optimal adaptation to the respective material (15 m/s best for stainless steel and aluminum, 30 m/s perfectly suited for steel) With two easily removable chip collection containers Dust extraction port (Ø 100 mm) for dust extraction systems available Dust extraction systems available as accessories Further developed, vibration-reducing base Scope of delivery: 1 x Standard grinding belt, grit size K 36 2 x Chip collection containers 1 x Wrench 1 x Grinding roller 42 mm Model: KRBS 101 Item No.: 3921001 Technical data Mains connection: 400 V Mains frequency: 50 Hz Gksdpfxscnz Ays Af Aea Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30 - 90 ° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Dust extraction port diameter: 2 x 100 mm Dimensions (length x width x height): 1250 x 750 x 1140 mm Weight: 159 kg Location: Ex works - available for short-term delivery

Condition: excellent (used), Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Gkedpozii N Dsfx Af Asa

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf Gjdpfx Afsgh T Hko Aeka - Model ZB 60/3 MD - year of construction 2026 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: new, Year of construction: 2026, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Gkodpfx Afedktnke Aea

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Gksdpfx Aszmu N Rjf Aoa Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor Gjdjnzhxqspfx Af Aeka B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: new, Year of construction: 2026, CORMAK RBM 40HV Tube and Profile Bending Machine The CORMAK RBM 40HV tube and profile bending machine is a precise three-roll, roll-type bending machine designed for bending steel tubes, rectangular profiles, and solid materials. It enables operation in two working positions – vertical and horizontal – allowing flexible adaptation to different production conditions. Equipped with hardened rollers and a graduated upper roller pressure adjustment system, it ensures high repeatability of bending radii and excellent resistance to wear. Main advantages of the machine Roll-type (non-mandrel) bending system – enables bending of tubes and profiles without the risk of cross-section deformation. Vertical or horizontal operation – allows adaptation to the technological layout of the workstation. Mechanical upper roller pressure adjustment with vernier scale – precise setting of the bending radius. High machine weight (485 kg) – ensures excellent stability and vibration-free operation during bending. Ground and hardened guide rollers – increased durability and accurate material guidance. Foot pedal operation – comfortable and safe control for the operator. Left and right rotation – versatility when producing complex shapes. Design and technology The CORMAK RBM 40HV has been designed for intensive use in industrial environments. The machine body is made of thick-walled, rigid steel components, providing high resistance to twisting forces and bending loads. The bending rollers are manufactured from hardened and precisely ground steel with a diameter of 40 mm, increasing their resistance to wear. The pressure adjustment system with a vernier scale allows the operator to repeatedly set the same bending radius, which is particularly important in serial production. Precision and work efficiency Gsdpfou Snm Isx Af Ajka The CORMAK RBM 40HV tube and profile bending machine provides high bending accuracy for both individual components and series production. The gearbox with a motor power of up to 2.2 kW (S6) enables smooth bending of demanding materials, including steel tubes with a wall thickness of 2 mm. The possibility of operation in both rotation directions significantly simplifies the production of closed arcs and spiral-shaped structures. Applications The RBM 40HV model is a professional tool for the metalworking industry, designed for bending materials with various cross-sections. It is ideal for: production of railings, handrails, canopies, and structural components, companies specializing in steel tube and profile processing, metal workshops manufacturing small architectural elements, serial production of highly accurate bent components. Standard equipment Side guide rollers Foot pedal control system Set of working rollers Technical and Operating Documentation (DTR) in Polish CE Declaration of Conformity Technical specifications Parameter Value Material: round tube 50 × 2 mm Material: rectangular profile 50 × 50 × 2 mm Material: round solid bar 35 mm Material: rectangular solid section 35 × 35 mm Roller diameter 40 mm Motor power S1 1.5 kW / S6 2.2 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 900 × 850 × 1700 mm Weight 485 kg

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine Gksdpfx Asu Snlkef Asa The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: like new (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: E-008281, There are 7 transport trolleys for sale. Gksdpozqu S Tofx Af Aoa Price per unit. Load capacity: 500 kg.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, input voltage: 400 V, PIPE AND PROFILE BENDING MACHINE This new pipe and profile bending machine is designed for the efficient forming of round and rectangular tubes, as well as round and square solid bars. Its robust construction, compact dimensions and 2.2 kW motor make it a practical solution for metalworking workshops, fabrication companies and industrial production facilities. The machine is suitable for producing curved components used in steel structures, frames, railings, gates, furniture, architectural elements and a wide range of custom metalwork applications. MATERIAL CAPACITY Round tube: up to 70 x 2 mm Rectangular tube: up to 60 x 60 x 3 mm Round solid bar: up to 35 mm Square solid bar: up to 35 x 35 mm TECHNICAL SPECIFICATIONS Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 400 V, three-phase Machine dimensions (L x W x H): 900 x 850 x 1700 mm Machine weight: 450 kg KEY ADVANTAGES Suitable for tubes, profiles and solid bars Wide material capacity Robust and stable construction Compact machine footprint Simple and convenient operation Suitable for workshop and production use New and fully operational machine DOCUMENTATION AND SERVICE 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English DELIVERY We can arrange delivery of the machine directly to the customer. Transport costs are calculated individually according to the delivery destination and the carrier’s quotation. Gkjdpfxsytffwe Af Asa Please contact our sales department to receive further information, a commercial offer or an individual transport quotation. Visit our website to explore our complete range of metalworking machines and equipment.

Condition: good (used), Vacuum Filler Line Make: Handtmann Model: VF200 Complete with loader *With Handtmann Meatball forming attachment* Gkjdpfeznkfdex Af Aea

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side Gkjdpfen E N Ndjx Af Aja 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units working range: wire diamter range: 1,5 - 5,0 mm stripmetal width: max. 50 mm feeding length: max. 200 mm output: max 450/min. Gksdovuzvdepfx Af Aoa

Condition: excellent (used), Year of construction: 1977, equipped with: 1 pce. BIHLER auccustic cabine 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: Gkjdpjfzr Aqofx Af Aja wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 3 Standard slide units Working range: wire diameter range: 0,5 - 3,5 mm Gksdpfx Afjl D N Hvj Aja strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: excellent (used), Year of construction: 1984, Equipped with: 1 Grip feeding system right hand side 3 Press units á 180 kN = Total 540 kN 4 Standrad slide units 1 Narrow slide unit working range: Gedpfx Aoma S Nrjf Aeka wire diameter range: up to 10,0 mm strip metal width: up to 100 mm feeding length: up to 250 mm output: up 135/min.

Condition: excellent (used), Year of construction: 1995, Control cabinet für Thread forming unit BIHLER GSE 4.1 Godpfx Afsx Rrqij Aska Thread dimameter range: M 3- M 8 Spindle stroke: max: 15 mm Roduction rate: max. 120/min

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side 4 pcs. Width slide units (welding press slides) Gkedpfx Afowxarqo Aea 1 pce Welding sytem BIHLER B 1000 Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side Gksdpfx Ajtqf Iqsf Asa 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Gedjtmtzkepfx Af Ajka Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 4 Standard slide units 1 Narrow slide units Godpex Tuzcsfx Af Aoka 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system Gsdpfx Aer D N Eqef Ajka 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: good (used), Year of construction: 1985, Main drive motor: 400 V, 055 kW, 2800/min Gksdpfsdzud Dsx Af Aea Thread dimameter range: M 1- M 6 Spindle stroke: max: 15 mm Roduction rate: max. 120/min

Condition: used, Year of construction: 2000, Second-hand machine Gkedezk Nruopfx Af Asa Year of manufacture: 2000 Features and technical specifications: - Grinding unit can be swivelled using a hand crank - The machine frame, made of welded steel, guarantees high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for better sanding results - Oscillation can be switched on as required - Grinding base with graphite coating for a longer service life of the grinding belt - Height-adjustable grinding table to utilise the full width of the grinding belt - Additional table for grinding radii with integrated extraction ports - The spring-loaded belt tensioning system automatically compensates for differences in belt length - With adjustable stops, ideally suited for veneer sanding - Excess veneer can be sanded down effortlessly - With castors - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Grinding surface length: 800 mm - Grinding surface width: 150 mm - Grinding unit swivel range: 0–45° - Work table length: 950 mm - Worktable width: 450 mm - Work table height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: at short notice Location: Flörsheim