Used Profile Machining Centre for sale (67,863)

Condition: excellent (used), functionality: fully functional, Capasity 30 cm3. Flat steel 200 x 30mm (800mm diam) flat stell standing 100 x 18mm (800 mm diam) Hsdpjzhmbujfx Aqrsp

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT PUMP ; PAPER FILTER ; TOOL SETTER Hodpfox U E Szex Aqrsp NOTE: WITH No 1 4th AXIS TABLE

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Hjdpfxoyurx Ts Aqrsp Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Hedszdqttopfx Aqrep Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Hodpfszd Dfijx Aqrjp Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. Hsdpfeglaq Isx Aqrep - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: new, input voltage: 230 V, - Shaft diameter 40 mm - Can be used horizontally/vertically - Foot control - Emergency stop - Includes 1 set of standard steel rollers - Documentation - 230V Hodpelxw Rmofx Aqrsp

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg Hodpfx Aqszhkbforep - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Hjdpfx Asu Snlkoqrsp Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Hedpfjyq Nyyox Aqrsp Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Hodpfxex Nf Tbs Aqrjp Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: reconditioned (used), Year of construction: 2016, operating hours: 9,701 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: series 31i-B5, overall weight: 3,300 kg, spindle speed (max.): 42,000 rpm, spindle nose: A2-4", number of spindles: 2, number of slots in tool magazine: 72, tool length: 150 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC machining centre WILLEMIN MACODEL W508MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2016 CNC control: FANUC series 31i-B5 Number of simultaneous axes: 5 Stroke X axis: 450 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 425 [mm] Traversing feeds X, Y and Z axes: 40000 [mm/min] Axes acceleration: 10 [m/s²] Max. bar diameter in turning spindle: 42 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 7.5 [kW] Angular A axis stroke: 360 [°] Resolution A axis: 0.001 [°] Drive A axis: Torque-motor Hjdpfxjy Uwp Es Aqrsp Spindle taper A axis: A2-4" B axis swivelling stroke: -15 [°] / +100 [°] Resolution B axis: 0.001 [°] Drive B axis: Torque-motor Spindle type: HSK-E40 Max. spindle speed: 42000 [rpm] Tool changer magazin number of stations: 72 Max. tool lenght: 150 [mm] Max. tool diameter: 80 [mm] Tool change time: 1 [sec] Chip to chip time: 3 [sec] Lubrication tank capacity: 150 [l] Collant pump flow rate: 60 [l/min] Rated current: 50 [A] Total power required: 35 [kVA] Supply voltage: 400 [V] Working hours: 9701 [h] Machine weight: 3300 [Kg] INCLUDED EQUIPMENT: x1 Back working unit with integrated 3-position turret on linear slide x1 Vise on back working unit x1 Counter-spindle on back working unit x1 42,000 rpm spindle with air/oil lubrication x1 RENISHAW OMP40-2 part probe x1 BLUM LaserControl NT laser measuring system for tool setting and tool monitoring x1 DETECTOR FRANCE type 202 tool breakage detection device x1 A2-4" collet chuck Set of 58 HSK-E40 tool holders x1 Self-tightening drill chuck LNS Super Hydrobar bar feeder, type 6.42 HS 3.2 Various equipment for LNS Super Hydrobar bar feeder Set of technical manuals x1 parameter backup system Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, including CNC milling, drilling, and tapping machines, as well as CNC grinding machines.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted Hjdpfjzcd D Rox Aqrep – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Hodpfxozauxgs Aqrjp Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: ready for operation (used), Year of construction: 2013, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 540 mm Z-AXIS TRAVEL: 560 mm DISTANCE SPINDLE NOSE-TABLE: 75-635 mm DISTANCE COLUMN-SPINDLE AXIS: 550 mm RAPID FEEDS X-Y-Z: 44 - 44 - 25 m/min SPINDLE: 11000 rpm; 26 kW; ISO 40 TABLE SIZE: 950 x 480 mm Hedpezda Hqefx Aqrsp MAX ADMITTED LOAD: 1300 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: BASKET-TYPE ; 28 POS MAX TOOL DIAMETER: 65 (130) mm MAX TOOL LENGHT: 250 mm MAX TOOL WEIGHT: 7 Kg CONTROL UNIT: FANUC 0-iMD WEIGHT: 6900 Kg OVERALL DIMENSIONS: 3366 x 2238 x 3130 mm ACCESSORIES: SWARF CONVEYOR ; MECHANICAL TOOL SETTER ; PORTABLE HANDWHEEL

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Hodpfjy Nx Ufox Aqrop Total number of tool changer positions: 77

Condition: used, Year of construction: 2001, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 2001 Control : Heidenhain MillPlus Hsdpfx Ajzbzchsqrop Speed : 18000 rpm Movement X/Y/Z : 630/560/560 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):119 Nm Taper:SK40 Workingtable: Clamping surface:1.000 x 600 mm Tableloading (max.):400 kg In general: Toolmagazine:2x 10 stations Rapid travers in X/Y/Z:26/26/20 m/min Equipment/Accessory: Chipmanagement:Chiptrumpet Coolingmanagement:Cooling unit Oilmistseparation:Mechanical extraction, Hör AFS 1100 4.-Axis:Magerl Rotomatik 120 with Counterbearing Processobservation:Operation mode 4 Setup operations:Electronical handwheel Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: used, Year of construction: 1999, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 1999 Control : Heidenhain MillPlus Speed : 12000 rpm Movement X/Y/Z : 800/650/550 mm Spindle: Technology:Motorspindle Speed:12.000 rpm Hedpfx Aqjzbzcbsrop Power (max.):15 kW Torque (max.):130 Nm Taper:SK40 Workingtable: Clamping surface:1.100 x 650 mm Tableloading (max.):600 kg In general: Toolmagazine:25 stations Rapid travers in X/Y/Z:18/18/15 m/min Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Coolant pump Oilmistseparation:Electrostatic extraction, W+W EL-FI 1000 Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: Hedpfx Aqefkz Rbsrsp - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: excellent (used), functionality: fully functional, grinding length: 600 mm, grinding width: 500 mm, total height: 1,840 mm, total length: 2,900 mm, total width: 1,840 mm, grinding height: 230 mm, table length: 600 mm, table load: 200 kg, table width: 200 mm, For sale is a DUE Grind surface grinding machine, brand Asyst, model A525 PNC 100. This machine has been completely overhauled from a Jung 525 surface grinder. A key feature of this machine is its ability to operate both conventionally as well as with CNC control. The machine is in very good, near-unused condition and is ready for immediate use. Technical Data: Year of manufacture: Table length: 600 mm Table width: 200 mm X-axis traverse (stroke): 600 mm Y-axis (grinding height): 500 mm Z-axis travel, end positions +/-: 230 mm Table speed X-axis: 0.3-25 m/min Magnetic chuck dimensions: 600x200 mm Optional 3-point dresser: 350x200 mm Max. workpiece weight (incl. magnet): 200 kg Working area: 400 mm Y-axis traverse speed: 0-1,000 mm/min Z-axis traverse speed: 0-1,000 mm/min Y-axis positioning accuracy: 0.001 mm Z-axis positioning accuracy: 0.001 mm Y-axis measuring system resolution: 0.0001 mm Grinding wheel dimensions: 250x30x51 mm Spindle speed: 100-3,800 rpm Spindle motor power: 100-3,800 kW Automatic dressing with stationary diamond unit TA 3/5 Machine dimensions: 2,900x2,320x1,840 mm Weight: 2,300 kg Transport and loading can be organized Europe-wide at an additional cost if desired. Prices net plus VAT. Viewing is possible by appointment. Please contact us—our team looks forward to assisting you. Hodpfx Ajyx D Ipeqrep Trade-in or exchange is possible! Machines Purchase / Sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or would you like to sell your equipment? For more information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, number of rollers: 3, overall weight: 5,000 kg, Equipment: documentation/manual, Profile Bending Machine PARMIGIANI Mod. MERCORI – M. Used. Three-roll horizontal profile bending machine. Immediately available while stocks last. Visualized adjustment control. Supplied complete with tooling for bending flat bars and tubes. New electrical cabinet. User and maintenance manual included. Bending capacity: angle 120 x 120 x 12: min. Ø 1200 mm; U 160 vertical: min. Ø 1000 mm; Flat bar vertical 140 x 40: min. Ø 1000 mm; Flat bar horizontal 120 x 30: min. Ø 1600 mm; Tube 4″: min. Ø 1200 mm. Weight: 5000 kg. Motor power: 380 V, 12 Hp. Hodpfx Aqjyxwdworjp

Condition: used, Wema Probst profile milling machine Main motor: 11 kW Hedpfx Ajc N N U Njqrop Disassembled and ready for loading.

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm Hodpfx Aowv Havjqrep - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Hjdpfx Aswvgideqrsp Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Hjdpfeyg Ef Djx Aqrsp Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of tool changer positions: 18