Used Profile Milling Machine for sale (67,647)

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW Gedpfx Aozc I Tpekyeiu - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm Gisdpfx Ajzc Iv Dskysu - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are compatible with a HERKULES WETZLAR profile bending machine, type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm 3 pieces, roller set No. 3, roller diameter 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm Gijdpjglaq Ijfx Akyju - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway The machine had 2 driven rollers Weight of all rollers: 57 kg Good condition

Condition: used, Year of construction: 1989, x-travel 580 mm y-travel 380 mm Gsdpfxjzczfxj Akyjiu z-travel 360 mm total power requirement 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,800x2,130x1,980 m

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Giedpfx Aezbybiskyju Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, The machine can be inspected at our premises. Gjdpfx Asviq Tzskyeiu

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm Giodpfx Aszcu Tcjkysu - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2005, Lot consists of: (1) 4-Axis HMC Technical Details: X/Y/Z 630 mm, spindle 15,000 rpm / HSK-63-A, A-axis swiveling table, CNC SIEMENS SINUMERIK 840 D. Gedpfeym Tdzox Akyoiu

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The machine was previously owned by a well-established Formula 1 team from Central Europe! The milling head has been freshly inspected by the machine manufacturer, making it partially overhauled and fully functional. Godpszcqncjfx Akyeiu The machine was always covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis tilting milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area enclosure Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by prior arrangement.

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Gedeza Egnspfx Akyoiu Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, X axis (longitudinal) 800 mm Y axis (transversal) 400 mm Z axis (vertical) 300 mm Table length 1340 mm Table width 300 mm Max. spindle speed 2500 rpm Spindle motor power 3 kW Dimensions (L x W x H) 1800.0 × 2000.0 × 2080.0 mm Gijdpfx Aksw Tyyijyju Weight 2050 kg

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front side - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction ports: 150/120 mm - With 4-roller power feed unit Giodpfoxllw Ajx Akyeu Weight: 600 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Installation dimensions: 1200x80x1350 mm Fence jaws made of wood Incl. Holz Her 3-roller feed unit incl. stand With chassis Godpfx Aexllxaskysiu Availability: short-term Location: Röllbach

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers Giodpfx Aszccuujkyju TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1993, x-travel 400 mm y-travel 375 mm z-travel 350 mm turning speeds 63 - 4000 U/min spindle taper ISO 40 Pull studs ISO TYP B quill stroke 50.0 mm table: 650 x 350 mm workpiece weight max. 200 kg T-slots 5x 14H7 feed range 10 - 1000 mm/min rapid traverse 1.5 / 1.0 m/min Number of working hours ca. 504 h control DIGI "VRZ 650" voltage 380 V total power requirement 8.0 kW Gisdpfozbc Dyjx Akysu weight of the machine ca. 1550 kg. range L-W-H 1640 x 1580 x 1840 mm from a training center very little run (!!) operating hours approx. 504 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * automatic tool clamping with clamping/pull bar * Swivel milling spindle guard - Robust work table incl. T-slots ... 650 x 350 mm * Number/size of T-slots 5 pieces 14H7 * Distance T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: excellent (used), Year of construction: 1993, x-travel 500 mm y-travel 380 mm z-travel 350 mm tool taper ISO 40 spindle turning speed range 63.0 - 4000 U/min feeds 10 - 1000 mm/min quill stroke 50.0 mm table-size 800 x 360 mm table load ca. 250 kg T-slots 14H7 - 5/63 mm rapid traverse X-axis 1.5 m/min rapid traverse Z-axis 1.5 m/min rapid traverse Y-axis 1.0 m/min Control DIGI "VRZ 650" Godpszbc Dgjfx Akyeiu Number of working hours 810 h voltage 380 V control voltage 110 V engine output 8.0 kW weight 1850 kg dimensions of the machine ca. 1880 x 1796 x 1840 mm from a training center very little run (!!) operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * Automatic tool clamping with clamping/pull bar - Robust work table incl. T-slots ... 800 x 390 mm * Number/size of T-slots 5 pieces 14H7 * Distance between T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: excellent (used), Year of construction: 1993, Vertical spindle mount SK 30 Speed range 265 – 3000 rpm Drive power 1.5 / 2 hp Horizontal spindle mount SK 30 Speed range 50 – 1500 rpm Drive power 3 / 4.2 hp Table surface area 800 x 200 mm Longitudinal travel X-axis, automatic approx. 600 mm Transverse travel Y-axis, automatic approx. 200 mm Vertical travel Z-axis, automatic approx. 400 mm Distance between table and milling spindle 300 mm Feed rates, stepless 30 - 340 mm/min Rapid traverse yes Gisdpfxjzbikmj Akyou Dimensions L x W x H approx. 1300 x 1250 x 1800 mm Weight 900 kg Accessories / Special features: • 3-axis digital display ELESTA • Vertical milling head, SK 30 with boring quill, swiveling left-right • Horizontal milling attachment, SK 30 • Feed in all 3 axes, steplessly adjustable via potentiometer on the control panel • Rapid traverse • Rotary table, swiveling left-right • Coolant system • 2-stage main motor • Central lubrication This very good GUALDONI machine comes from an educational institution and can be inspected and demonstrated under power at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometric overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 rpm Feeds: (18) 8 - 400 mm/min Head swivels: 180° Equipment: - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new Gisdpfezcdarex Akysu - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Condition: used, Year of construction: 2000, Table size: 1340 x 800 mm + table extensions Table height: 870 mm Gjdpfx Akszb N T Isyjiu Control panel at eye level Swivel range: -5 - 45° Aigner integral stop Spindle speeds: 3000 / 4500 / 6000 / 9000 1/min Vertical adjustment: 120 mm Milling arbor: 30 mm / MK 5 Dust extraction port: 2x 120 mm Weight: approx. 1000 kg Storage location: Supplier

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Gedezbmzvopfx Akysiu Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), functionality: fully functional, Internal article number: 26007 Universal milling machine Deckel FP1 Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Connection power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed rate: Continuously variable, 5-500 mm/min Rapid traverse function: Not operational! Gsdszb Ni Aopfx Akysiu The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Final price, as differential tax applies according to §25a of the German VAT Act (UstG). You will receive a proper invoice! Internal article number: 26043 Gsdpfx Akszb I Tgsyjiu CNC milling machine Optimum F100 Year of manufacture: 2007 The machine comes from a public educational institution. Control system: Siemens Sinumerik 802 S base line RS232 interface Spindle mount: ISO40 Speed: 100 - 6000 rpm Travel distances: X 450 / Y 300 / Z 400 mm Table: 920 x 280 mm Table load: 300 kg + Operating manual + Programming manual + Electrical wiring diagram + Accessories (Various tool holders, including various MK4 holders (reduction from basic mount to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 rpm Travel distances: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected in operation by arrangement, in our heated warehouse with over 500 m² of space.

Condition: good (used), functionality: fully functional, Internal article number: 26047 Universal milling machine Thiel Duplex 158 + Accessories (Various tool holders, including various MK4 holders (reduction from basic holder to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 RPM Gisdpfxozb I Nze Akyju Travel: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380 V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which covers an area of over 500 m².

Condition: excellent (used), Year of construction: 2015, operating hours: 23,488 h, functionality: fully functional, travel distance X-axis: 20,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, UNISIGN UNIPORT 7000 CNC Portal Milling and Drilling Machine For sale is a heavy-duty CNC portal milling/drilling machine, type UNISIGN UNIPORT 7000, from an Italian group that is relocating product-specific machining operations abroad. Due to compliance and safety regulations, as well as the associated workpiece protection measures, the complete photographic documentation of the machine will only be provided upon request to select, end-user customers. The machine features a very large working area with 20,000 mm of travel in the X-axis, 3,500 mm of travel in the Y-axis, and a robust portal design suitable for large and heavy workpieces. Technical specifications: Manufacturer: UNISIGN Type: UNIPORT 7000 Machine type: CNC Portal Milling/Drilling Machine Control system: Siemens Sinumerik 840-D Travel distances: X-axis: 20,000 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Table: approx. 22,250 x 3,170 mm Max. table load: 2,000 kg/m² Portal clearance width: 3,000 mm Distance from spindle nose to table: 250 – 1,500 mm Spindle: Tool interface: HSK 100 Spindle power: 36 kW Max. spindle speed: 4,000 rpm Max. torque: 1,350 Nm Gearbox: 2-stage Machining performance in C45 steel: Full drilling: Ø 130 mm Thread drilling: M55 Milling performance: approx. 1,200 cm³/min Tool magazine: Chain magazine with 48 positions Max. tool length: 500 mm Max. tool weight: 25 kg Tool change time: approx. 10 seconds Feed rate / Rapid traverse: Rapid traverse X/Y/Z: 40,000 mm/min Feed rate range: 5 – 40,000 mm/min Machine data: Machine weight: approx. 146,000 kg Footprint: approx. 28,500 x 10,800 mm Overall height: approx. 5,000 mm Gijdpfezcqw Rsx Akyou Connected load: approx. 80 kVA Electrical system: 400 V / 50 Hz / 3 phases Description: Heavy-duty CNC portal milling machine with a stable portal design, suitable for machining large and heavy workpieces. The machine is equipped with a Siemens Sinumerik 840-D control system, a powerful main spindle, a large table, and an automatic tool magazine. Ideal for mechanical engineering, large part machining, mold making, steel construction, energy technology, or similar applications. Technical specifications are based on available documentation. Subject to change and errors. Inspection possible by appointment.

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB Gijdpfxjzauvfo Akyeu If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.