Used Promecam Rg-25-12 for sale (84)

Condition: good (used), Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool Fsdpfx Aehqf Rnsgrspb -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Condition: reconditioned (used), functionality: fully functional, control type: manual, actuation type: hydraulic, working width: 60 mm, stroke length: 105 mm, throat depth: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, back gauge: 345 mm, overall weight: 2,800 kg, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Fpedpfsxwukcex Agrjb Distance between uprights: 1020 mm Throat depth: 200 mm

Condition: used, Press brake Amada Promecam HFB 12530 5 axes Y1 Y2 X Z1 Z2 Fodpfx Agox H A Dlorspb Controller Delem DA58 Retrofitting available

Condition: good (used), Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 -Control valve: Abex Denison S16-92489 / S16-39303 / S26.20456 2-way cartridge valves: Bosch Individual components: type / number see photos -Dimensions: 875/560/H400 mm Fpsdjhqifyopfx Agrsb -Total weight: 204 kg

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Fsdpox Ed H Ajfx Agrepb

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Fedpfxjx Dr U Ej Agrepb

Condition: used, functionality: fully functional, Hydraulic Press Brake Manufacturer: Promecam, Model RG - 104 Technical Details Fpodpfx Agox Nnb Ijreb Brand: PROMECAM Model: RG - 104 Year of manufacture: Pressing force: 100 tonnes Bending length: 4,050 mm Throat depth: 410 mm Stroke: 100 mm Dimensions: L 4.25 x W 1.8 x H 2.50 m Weight: approx. 5.5 t Equipment - Amada tool holder - Large tool package as shown in photos - Manual back gauge - Bending angle adjustment via handwheel All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1999, Technical data: Fpjdpfx Aovrh Rcegrsb Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Fpjdotv Rk Rjpfx Agreb Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 14600 h Dimensions of machine: length 3300 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3,5x1,8x2,6 m Control AMNC NT All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 1982, pressure:150 t chamfer lenght:3100 mm distance between columns:2700 mm total power requirement:15,0 kW weight of the machine ca.:10 t Fjdpfx Agjidrg Horepb dimensions of the machine ca.:3,115 x 1,66 x 2,785 m throat:400 mm stroke:150 mm dayligth:450 mm

Condition: refurbished (used), PRESSBRAKE PROMECAM TYP RG 154 PRESSURE 150t SHEET METAL LENGHT 4000mm Fpedpfx Asd R Ay Rjgrjb

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Fodpfovvwdyjx Agrspb

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Fjdpfx Aex Dr Daegrspb Please request further details and photos. We can purchase your faulty press brake.

Condition: used, Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake PRESS BRAKE HYDRAULIC CAPACITY: 80 TONS Fpedpfx Asfuaqmogrob BENDING LENGTH: 2500mm CONTROL: OPERATEUR NO OF AXIS: 7 FRONT GUARDS ERWIN SICK MACHINE MOUNTED SIDE AND REAR INTERLOCKEDFENCING

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. Fpsdpfx Agem Ncayoreb The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Fsdpoxfbb Refx Agropb Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: used, Hydraulic Shear PROMECAM GH 1230 A Capacity: 3000 x 12 mm Electrical Back gear gauge travel: 1000 mm Fedpfx Agjxni Uksrjpb Throat depth500 mm Photoelectric cells on the back New blades Length3600 mm Depth: 2400 mm Total height: 1900 mm Weight: 11 T

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg Fpjdpfx Ajctvqpogrjb

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 stock no. 01917 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 Fodpspygydjfx Agropb STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 2012, condition: excellent (used), Used compact / small foot print Amada Lasmac LC – 1212 a IV NT flat bed 2d cnc laser cutting machine for sale: Fully serviced single bed very clean Amada LC – 1212 a IV NT cnc laser – Video at the bottom of this listing Specification: Most recent work carried out by Amada UK: Fodsimwcbopfx Agrspb New turbo blower recently fitted New lenses and mirrors in August 2022 Fully serviced with Amada Uk Year / New 2012 Power: 2.5kw Machine Model: LC – 1212 a IV NT Travel method: X-Axis Material Travel, Y Axis: laser Beam Travel Axis Travel Distance X x Y x Z M: 1270 x 1270 x 300 Positioning Speed X x Y x Z m/min: 80 x 80 x 60 Cutting feed rare X x Y m/min: 0 – 20 Control Method: X-, Y- and Z-axes (simultaneously controlled) + B – axis Max. sheet size X x Y x Zmm: 2540 x 1270 x 300 Repeatable positioning accuracy mm: +0.005 Oscillator model: AF2000E-LU2.5 AF4000E Oscillation Process: fast axial flow, high frequency discharge excitation Ideal if you are looking to bring laser cutting in house and space is a premium Delivery and installation can be arranged AMADA LASMAC LC1212 MK IV 2.5 KW NT LASER CUTTING MACHINE MACHINE CAPACITY 1270 X 1270 2540 WITH ONE REPOSITION

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake Fpodpfx Agsctq Nqsrsb -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm -Weight: 10 kg

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, Fpedpfx Agou A Dgrerjb ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 Fpedpfx Ajwybcysgreb BENDING PRESSURE 80 TONS BENDING LENGTH 2500 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW

Condition: good (used), Control unit, control panel, operating panel, control unit, foot switch, safety foot switch -Foot switch: Safety foot switch from Promecam STPC 250 40 121 press brake -Metal housing: with protective cover -Overall dimensions: 380/180/H165 mm Fodpfx Aehqf Rrjgrepb -Weight: 6.7 kg

Condition: used, functionality: fully functional, Year of construction: 1985, control type: CNC control, Promecam press brake, fully operational. Sold with tooling. If you have any further questions, we will be happy to answer them. Fpedox S Iyiepfx Agrjb