HYDRAULIC PRESS BRAKE

AMADA PROMECAM ITS2 50-20

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster Lsdpfehturcjx Al Tjrn to test under power ! option: warranty, setup, training

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Lrjdpfev Tk Exsx Al Ten Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: new, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or stamping separation of metal parts, with dimensions ranging from 50 x 50 mm up to 1100 x 100 mm. The 1st station processes the products using a contact roller (approx. 55° Shore) with a sanding belt, removing heavy burrs in the first step. The 2nd station processes the products with two counter-rotating transverse belts from below and above. The transverse belts round the edges of the parts to be processed, both on the inner and outer edges. A major advantage is also the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 Z2C: Working capacity (diameter mm) 1100x100 Number of belt stations (Z) 1 Number of transverse belt stations 2 Sanding belt, dimensions (mm) 1100x2200 Sanding belt speed (m/s) 8-22 Transverse belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Transverse belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Dust extraction connection per head (diameter mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000 Ljdjd Ixadspfx Al Torn

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Lrsdox Enh Tjpfx Al Tsn Application Types Milling

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Ljdpfxotwliwe Al Tjrn Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, Grindermak 150-06 Grindermak 150-06 Ledpfx Alofuakcs Torn New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: used, Gehrungs cold-cut circular saw KALTENBACH, type KKS 400 NA Machine no. 101701, year of manufacture 1983 Saw blade diameter 400 mm Cutting range at 90° round Ø 130 mm Cutting range at 90° square 120 x 120 mm Cutting range at 90° rectangular 305 x 20 mm Cutting range at 45° round Ø 130 mm Cutting range at 45° square 110 x 110 mm Cutting range at 45° rectangular 245 x 30 mm Clamping range of the jaw feed 30 to 140 mm Working height 1000 mm Miter cut 0 - 180° Feed stroke 600 mm Saw blade speed 10 + 20 m/min, 2 speeds Motor power 1.7 and 2.6 kW Hydraulic motor 1.5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material jaw feed with infeed roller track on the left, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Miter cut - saw angle with manual adjustment - Hydraulic feed control, cutting speed can be adjusted manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant system with electric pump in the machine base - Hydraulic unit permanently mounted on the base machine - Piece counter with zero reset Space required for the saw 2600 x 1200 x 1900 mm Lsdped N H A Nefx Al Torn Weight of the saw approx. 1400 kg in good condition

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm Lsdpfx Aljv Tpxqe Tjrn -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, mileage: 72,000 km, power: 78 kW (106.05 HP), first registration: 01/2012, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro4, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35S11, Size: 2 - Maxi, VAT deductible. Net price: €6,390 20 units in stock ---- Please no emails / Emails can only be processed sporadically due to time constraints! Thank you for your understanding. ---- Opening hours and further information: Viewing and purchase possible without appointment: MO - THU: 9:00 to 16:00 FR: 9:00 - 13:00 SA: 9:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen Germany For inquiries: Christian Hirsch Please call several times as we are frequently with customers. ---- Full service history / workshop maintained: yes Emission standard: EURO 4 Environmental badge: Green Previous owner: 1 VAT deductible: yes Emission standard: Euro 4 = Green badge Available with or without air suspension -Reversing camera-LED -Interior lighting with motion sensor -Cargo compartment length: 4.35 m -Cargo compartment width: 2.05 m -Cargo compartment height: 2.07 m Folding passenger seat Interior features: Cup holder, Power steering Exterior features: Sliding side door, Electric and heated side mirrors, Central locking incl. remote control, Electric front windows Technology: Outside temperature display On-board computer Safety & Environment: Driver airbag, Immobilizer, ABS, ESP, Traction control, Particulate filter For inquiries: Christian Hirsch Please try calling several times as we are often assisting customers. More offers at / Equipment details were determined using VIN inquiry; technical errors possible. ---- Information provided online is non-binding and does not represent guaranteed characteristics. The seller does not accept liability for typing or data transmission errors, changes, or entry errors. Subject to errors and prior sale. Lodpfxov Nf Rzs Al Torn Sale to businesses or for export only.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Lredpfx Alst Ucgae Ton Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t