Used Pulse Oximeter for sale (653)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,119 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,423 kg, total height: 1,950 mm, total length: 1,850 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 C - 02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.100 mm Closed height: 1.950 mm Free lift: 1.300 mm Mast: Triplex (3F410) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V Charger: Dreiphasig 48 V 100 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (50%) Service weight: 3.423 kg Length: 1.850 mm Width: 1.100 mm Year of manufacture: 2019 Operating hours: 9.119 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control Nsdsz Aqc Eepfx Ai Aown ATTACHMENTS Sideshift Internal no.: 1309268 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,655 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,150 kg, total height: 2,060 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 216k GE120-310ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.100 mm Closed height: 2.060 mm Free lift: 1.500 mm Mast: Duplex (2F310) Fork length: 1.200 mm Fork carriage: 2A Nwsdpfx Aez Aql Tsi Aon Drive: Elektro Battery: 48 V 625 Ah (2018) Charger: 48 V - not tested Tyres: Superelastik 18 x 7 - 8 (80%) / 15 x 4,5 - 8 (40%) Service weight: 3.150 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2016 Operating hours: 14.655 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1308645 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2011, Clean air filter with rotary valve airlock Integrated pre-separator Negative pressure monitoring Fire extinguishing system with powder fire extinguisher Nwjdpo Adrxbjfx Ai Ajn PLC control Machine recognition and damper control for 8 machines/dampers Filter material with BIA test, category “M” Chip disposal via rotary valve airlock Maintenance opening for raw gas area Motor power: 9.2 kW / 3-phase / 400 V / 50 Hz Intake nozzle: DN 300 mm Nominal volume flow: 4810 m3/h Maximum volume flow: 6000 m3/h Negative pressure at Vn: 2100 Pa Filter area: 40 m2 Residual dust content: < 0.1 mg/m2 - H3 Sound pressure level: 81 dB(A) Compressed air consumption: 60 Nl/pulse Compressed air connection: 6 bar Dimensions L x W x H = 3015 x 970 x 2,280 Weight: 802 kg Note regarding used machines: • Errors and omissions in technical specifications and prior sale are reserved. • Stated prices are ex works, excluding loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address and telephone number!)

Year of construction: 2026, condition: new, FOBA F.0100-ir is "ultra" in every sense of the word: an ultra-short pulse laser that marks ultra black and is ultra fast and ultra compact. This makes it stand out with properties that cannot be taken for granted for a marking laser of this type. In addition, there is another special feature that makes the laser marker unique: the continuously adjustable pulse width between the femtosecond and picosecond range. This flexibility enables maximum marking precision, outstanding process stability and optimum adaptation to the most demanding marking requirements. The UKP marking system opens up a wide range of applications, particularly in the field of medical technology, for example for marking UDI codes, as well as for various applications in the production of automotive and electronic components. Nodpfjl Slvasx Ai Aswn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD extraction unit, without control software. Njdpfx Aeyrqnzji Aown Dust extraction unit, chip extraction, self-cleaning filter, vacuum-based ALKO ECO JET. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. It is ideally suited for all types of dry dust generated in various technological processes. Filter bags can be replaced according to specific requirements and intended use.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,983 h, load capacity: 3,000 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,180 mm, tire condition: 30 %, front tire type: superelastic tires (black), front tire size: 23 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,589 kg, total height: 2,270 mm, total length: 2,500 mm, total width: 1,300 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.760 mm Closed height: 2.270 mm Mast: Triplex (3F476) Fork length: 1.180 mm Fork carriage: 3 A Drive: Elektro 80V Battery: 80 V 620 AH v. 2011 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 10 - 12 (30%) / 18 x 7 - 8 (40%) Service weight: 5.589 kg Length: 2.500 mm Njdpfxez Apycs Ai Aewn Width: 1.300 mm Year of manufacture: 2011 Operating hours: 5.983 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Heating, Pulse control ATTACHMENTS Sideshift Internal no.: 1309140 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug Nwsdpfx Aiswa Uwdj Asn - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, Year of construction: 2012, Mazak VTC-820/30 – specification Overview - Brand: Mazak - Model: VTC-820/30 - Year model: 2012 - Location: Eskilstuna Control system - Mazatrol Matrix Nexus Movements - Number of axis: 4 (X, Y, Z + 4th shaft) - X-axis: 3.000 mm - Y-axis: 820 mm - Z-axis: 720 mm - Fast transport: 50 m/min - Distance spindle nose to table: 140–860 mm Spindle and tool - Spindle effect: 22 kW - Spindle RPM: 12,000 rpm - Spindelkona: CAT 40 - Tool changer: 30 positions - Cutting fluid through the spindle: 15 bar Nsdjz N An Espfx Ai Aewn Table - Table size: 3,500 × 820 mm - Max table load: 2,500 kg - T-slots: 7 pcs, 18 mm, pitch 100 mm 4th axle - Round Feeding Table Mazak DS50C-R1-Z, Ø 500 mm, with Roller Gear Cam - Vertical mounting on angle shelf Mazak MAZ 80090X Dimensions and weight - Machine depth: 3,700 mm - Machine height: 3,050 mm - Machine weight: 16,100 kg Equipment - Renishaw tool breakage control TRS2 - Shavings conveyor to the left, lamella conveyor with timer relay - Cutting fluid through the spindle, 15 bar - Manual rinsing nozzle - Portable pulse generator (handheld) for shoulder movements - Automatic power shutdown at end of program - 3 extra M-functions (1 pair) - Robot interface, Ethernet/IP slave - Automatic doors

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5381-2013, Year of construction: 2013, load capacity: 1,600 kg, fuel type: electric, battery model: DIN 43535, 3PzS or 4EPzS types, remaining battery capacity: 90 %, battery voltage: 24 V, fork carriage width: 800 mm, fork length: 1,195 mm, turning radius (outer): 1,780 mm, overall weight: 1,540 kg, total height: 4,790 mm, total width: 880 mm, Equipment: pallet forks, Doosan LEDS16IP — 1.6t electric platform stacker General Drive: Electric, walk-behind Capacity (Q): 1.6 t (1,600 kg) Load centre distance (C): 600 mm Load distance (X): 836 mm Year 2013 Serial Number 5381-2013 Max. mast height 4,790 mm Unladen weight incl. battery: 1,540 kg Initial lift (h5): 120 mm Nodpfx Aijz Tdirs Aswn Overall width (b1): 880 mm Fork dimensions (thickness/length): 185 / 1,195 mm Outer fork spread (b5): 575 mm Aisle width for 800×1200 pallet, lengthways (Ast): 2,520 mm Turning radius (Wa): 1,780 mm Performance Travel speed, laden/unladen: 9.0 / 10 km/h Travel speed, pedestrian/stacking mode: 5 / 3.5 km/h Lift speed, laden/unladen: 0.13 / 0.20 m/s Lowering speed, laden/unladen: 0.49 / 0.23 m/s Gradeability, laden/unladen: 6 / 8 % Electrics Drive motor (AC): 2.3 kW Lift motor (DC): 3 kW Battery: 24V, up to 500 Ah (DIN 43535, 3PzS or 4EPzS types) Max. battery weight: 400 kg Controller: AC pulse control (drive and lift)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. Nwodpjz Hwzmefx Ai Aon - Welding spot from 0.1 to 3 mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 6,892 h, load capacity: 5,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: telescopic, construction height: 2,570 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,300 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 355/50 - 15, rear tire type: superelastic tires (black), rear tire size: 200/75 - 9, overall weight: 8,244 kg, total height: 2,570 mm, total length: 3,050 mm, total width: 1,440 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-50/600 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 3.500 mm Closed height: 2.570 mm Mast: Standard (2W350) Fork length: 1.300 mm Fork carriage: 3 B Drive: Elektro 80V Battery: 80 V 930 Ah v. 2020 Charger: ohne/without Tyres: Superelastik SE 355/50 - 15 (25%) / 200/75 - 9 (25%) Service weight: 8.244 kg Length: 3.050 mm Width: 1.440 mm Year of manufacture: 2020 Operating hours: 6.892 h Condition: working condition Nwjdpfx Asz Aqh Ioi Aen EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control, Full free lift ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309197 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Nwjdpfxjrualpe Ai Ajn Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,721 h, load capacity: 1,800 kg, lifting height: 200 mm, fuel type: electric, gearing type: other, battery capacity: 200 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), total length: 1,700 mm, total width: 720 mm, fuel: electricity, STILL EXU 18 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Battery: 24V/200 Ah (2013)-GEL Charger: Sonstiges Ladegerät integr. Nwsdpez R T Nqofx Ai Asn Transmission: Impuls Tyres: Bandage BA v: Tandem Length: 1.700 mm Width: 720 mm Year of manufacture: 2013 Operating hours: 3.721 h Condition: working condition EQUIPMENT Pulse control Internal no.: 1308247 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Nodpszwgiqsfx Ai Aewn

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Nwodpfjzzz N Hjx Ai Aen Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,787 h, load capacity: 1,400 kg, lifting height: 7,360 mm, free lift: 2,300 mm, fuel type: electric, mast type: triplex, construction height: 3,050 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,532 kg, total height: 3,050 mm, total length: 1,750 mm, total width: 1,270 mm, fuel: electricity, Equipment: sideshift, LINDE R 14 - 01 – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 7.360 mm Closed height: 3.050 mm Free lift: 2.300 mm Mast: Triplex (3F736) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2015 Charger: Dreiphasig 48 V 80A not tested Tyres: Polyurethan Poly Service weight: 3.532 kg Length: 1.750 mm Width: 1.270 mm Year of manufacture: 2016 Operating hours: 4.787 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309270 Location: 14974 Ludwigsfelde bei Berlin Price on request. Njdpfx Aez R Ugwji Aswn Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 15,079 h, load capacity: 2,000 kg, lifting height: 4,550 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, gearing type: other, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,644 kg, total height: 2,120 mm, total length: 2,050 mm, total width: 1,180 mm, fuel: electricity, Equipment: sideshift, LINDE E 20 L-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 4.550 mm Closed height: 2.120 mm Free lift: 1.470 mm Mast: Triplex (3F455) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Nwsdpfoz Apuyjx Ai Asn Battery: 48 V 625 Ah v. 2017 Charger: ohne/without Transmission: Impuls Tyres: Superelastik 200/50 - 10 (0%) / 15 x 4,5 - 8 (0%) Service weight: 3.644 kg Length: 2.050 mm Width: 1.180 mm Year of manufacture: 2017 Operating hours: 15.079 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1308611 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Nsdpfxexwma As Ai Ajwn Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: used, Year of construction: 2018, machine/vehicle number: 1803006, with extraction system, manufactured by LOTUS LASER SYSTEMS, and an additional pre-filter extraction system, type: VACUAIR UML 350, in new condition. Nodpfez Nhr Ajx Ai Ajwn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 6,580 h, load capacity: 4,000 kg, lifting height: 3,490 mm, fuel type: electric, mast type: telescopic, construction height: 2,470 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 250-15, rear tire type: superelastic tires (black), rear tire size: 200 / 75-9, overall weight: 6,639 kg, total height: 2,470 mm, total length: 2,810 mm, total width: 1,310 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-40 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.000 kg Lifting height: 3.490 mm Closed height: 2.470 mm Mast: Standard (2W349) Fork length: 1.200 mm Fork carriage: FEM 3 A Drive: Elektro 80V Battery: 80 V 930 Ah v. 2022 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik 4 x SE 250-15 (80%) / 200 / 75-9 (90%) Nodpfsz Ap Nqsx Ai Aewn Service weight: 6.639 kg Length: 2.810 mm Width: 1.310 mm Year of manufacture: 2022 Operating hours: 6.580 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309296 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg Nwjdpfx Aez Et Rusi Ajn - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: used, Year of construction: 2012, Dust collector JP 300-L with briquetting press CS 3-12-R Year of manufacture: 2012 Equipment: Dust collector Briquetting press Technical data: Vacumobil JP 300: Nominal volumetric flow rate: 5100 m3/h Maximum volumetric flow rate: 6000 m3/h Pressure difference at nominal volumetric flow rate: 2700 Pa Pressure difference at maximum volumetric flow rate: 2200 Pa Filter area: 28.0 m2 Suction nozzle: 300 mm Nozzle height: 1215 mm (center) Fan motor: 7.5 kW On-site fuse protection: 32 A Compressed air connection: 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 120 NL per pressure pulse with a pulse duration of 150 ms Sound pressure level: 75.0 dB Weight: 900 kg Briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m3/h (material-dependent) Hydraulic pump motor: 3.0 kW Mixer motor: 0.37 kW Metering screw motor: 0.75 kW On-site fuse protection: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Nwjdoz Rrbkopfx Ai Aen Location: NRW (North Rhine-Westphalia) Availability: approx. June/July 2027

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm Nsdpfx Aijz Ahccs Aewn • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Condition: new, Magnetization Device, Magnet Physics MF-RI8, 251970 Item condition: New, without original packaging Njdpeivdl Tsfx Ai Aewn The item comes from the liquidation of a company in the automotive industry and was temporarily stored in carousels. Possible signs of storage. R12B1_EK You can find more magnetization devices – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading Nwodpoz Aha Isfx Ai Aon • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (