Used Pulse Oximeter for sale (634)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 13,631 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,570 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 75 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,171 kg, total height: 2,160 mm, total length: 2,000 mm, total width: 1,080 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 216 GE 115-330ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.300 mm Closed height: 2.160 mm Free lift: 1.570 mm Mast: Duplex (2F330) Dcodpfxez Aprro Ak Aop Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 750 Ah v. 2017 Charger: 48 V 150 A not tested Tyres: Superelastik 18 x 7 - 8 (75%) / 15 x 4,5 - 8 (40%) Service weight: 3.171 kg Length: 2.000 mm Width: 1.080 mm Year of manufacture: 2017 Operating hours: 13.631 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1308639 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,985 h, load capacity: 1,800 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,850 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 140/55 - 9, overall weight: 3,669 kg, total height: 2,850 mm, total length: 1,950 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, LINDE E 18-02 EVO / 386 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.650 mm Closed height: 2.850 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah v. 2018 Charger: 48 V 70 A not tested Tyres: Superelastik 200/50 - 10 %) Service weight: 3.669 kg Length: 1.950 mm Width: 1.200 mm Dedpoz Apu Hjfx Ak Ajcp Year of manufacture: 2018 Operating hours: 3.985 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1308893 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,433 h, load capacity: 1,400 kg, lifting height: 5,630 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,524 mm, battery capacity: 560 Ah, battery voltage: 48 V, fork length: 1,100 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 180x60x10, rear tire type: superelastic tires (black), overall weight: 3,401 kg, total height: 2,524 mm, total length: 1,800 mm, total width: 1,400 mm, fuel: electricity, Equipment: sideshift, LINDE R 14 G – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 5.630 mm Closed height: 2.524 mm Free lift: 1.850 mm Mast: Triplex (3F563) Fork length: 1.100 mm Fork carriage: FEM 2 A Drive: Elektro 48V Battery: 48 V / 560 Ah. v. 2019 Charger: Dreiphasig 48 V Tyres: Superelastik SE 180x60x10 (50%) Service weight: 3.401 kg Length: 1.800 mm Width: 1.400 mm Year of manufacture: 2019 Operating hours: 6.433 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Djdpez Ap A Rsfx Ak Aecp Internal no.: 1309300 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,896 h, load capacity: 4,800 kg, lifting height: 4,670 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, battery capacity: 805 Ah, battery voltage: 80 V, fork length: 1,600 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 250-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,090 kg, total height: 2,400 mm, total length: 2,930 mm, total width: 1,500 mm, fuel: electricity, Equipment: cabin, sideshift, LINDE E 48 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.800 kg Lifting height: 4.670 mm Closed height: 2.400 mm Free lift: 1.620 mm Mast: Triplex (3F467) Fork length: 1.600 mm Fork carriage: 3 Drive: Elektro 80V Battery: 80 V / 805 ah. Charger: Dreiphasig 80 V Dcsdpfx Akoz Ap Dhs Asp Tyres: Superelastik SE 250-15 (70%) / 21x8-9 (50%) Service weight: 7.090 kg Length: 2.930 mm Width: 1.500 mm Year of manufacture: 2007 Operating hours: 7.896 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309297 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 11,340 h, load capacity: 1,200 kg, lifting height: 2,950 mm, fuel type: electric, mast type: telescopic, construction height: 1,810 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 895 kg, total height: 1,810 mm, total length: 1,800 mm, total width: 800 mm, fuel: electricity, LINDE L 12 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.200 kg Lifting height: 2.950 mm Dcsdpfxsz Aqfme Ak Asp Closed height: 1.810 mm Mast: Standard (2W292) Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V Charger: Einphasig 24 V 30 A not tested Tyres: Polyurethan V Service weight: 895 kg Length: 1.800 mm Width: 800 mm Year of manufacture: 1997 Operating hours: 11.340 h Condition: working condition EQUIPMENT Pulse control Internal no.: 1309229 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,121 h, load capacity: 1,400 kg, lifting height: 8,180 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,360 mm, battery capacity: 560 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,674 kg, total height: 3,360 mm, total length: 1,800 mm, total width: 1,250 mm, fuel: electricity, Equipment: sideshift, OM XR 14 ac – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 8.180 mm Closed height: 3.360 mm Free lift: 2.700 mm Mast: Triplex (3F818) Dcodsz Aqf Hopfx Ak Asp Fork length: 1.150 mm Fork carriage: 2 B Drive: Elektro 48V Battery: 48 v 560 Ah v. 2017 Charger: Dreiphasig 48 V not testet Tyres: Polyurethan V Service weight: 3.674 kg Length: 1.800 mm Width: 1.250 mm Year of manufacture: 2008 Operating hours: 5.121 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309210 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,171 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 23 x 9 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 4,886 kg, total height: 2,260 mm, total length: 2,600 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-25 – Electric 4-wheel forklift Dsdpfxoz Aqixj Ak Ascp TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.900 mm Closed height: 2.260 mm Free lift: 1.550 mm Mast: Triplex (3F493) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 80V Battery: 80 V 620 Ah v. 2020 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 9 - 10 (25%) / 18 x 7 - 8 (50%) Service weight: 4.886 kg Length: 2.600 mm Width: 1.200 mm Year of manufacture: 2012 Operating hours: 6.171 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309260 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 13,447 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,248 kg, total height: 2,121 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.620 mm Closed height: 2.121 mm Free lift: 1.480 mm Mast: Triplex (3F462) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah Charger: Dreiphasig 48 V 75 A not tested Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (50%) Service weight: 3.248 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2021 Operating hours: 13.447 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309227 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Dcodpfx Aoz Aqp Eek Asp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,161 h, load capacity: 1,600 kg, lifting height: 2,940 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, battery capacity: 460 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,195 kg, total height: 2,000 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16C - 02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 2.940 mm Closed height: 2.000 mm Free lift: 1.400 mm Mast: Duplex (2F294) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 460 Ah v. 2019 Charger: ohne / Without Dcodpfx Asz Aqp Ssk Asp Tyres: Superelastik SE 18 x 7 - 8 (60%) / 15 x 4,5 - 8 (50 %) Service weight: 3.195 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2019 Operating hours: 3.161 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309225 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 6,210 h, load capacity: 1,500 kg, lifting height: 3,140 mm, free lift: 1,470 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, battery capacity: 920 Ah, battery voltage: 24 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,054 kg, total height: 2,120 mm, total length: 1,900 mm, total width: 1,080 mm, fuel: electricity, Equipment: sideshift, LINDE E 15 - 01 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.140 mm Closed height: 2.120 mm Free lift: 1.470 mm Mast: Duplex (2F314) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 24V Battery: 24 V 920 Ah v. 2015 Charger: ohne / without Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (90%) Service weight: 3.054 kg Length: 1.900 mm Width: 1.080 mm Year of manufacture: 2010 Operating hours: 6.210 h Condition: working condition Dcsdpfx Aoz Aqrgsk Ajp EQUIPMENT 3rd valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309250 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of various materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width). Simple operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect annealing engravings) • Scanning unit "New Generation ECO" • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment Dcodpfx Akjd S H Nvj Aep • Full enclosure with 4 rollers • "Weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP IP connectivity for external components • Industry 4.0: The status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% thanks to 64-bit architecture • Improved stability through integrated control card • Optionally up to 4 axis controls (integrated) • Optional deep engraving with Z-axis • More efficient algorithms for fast hatching. • Completely newly designed galvanometer generation • 2x laser pointer for checking the focus position • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating manual and operating software in German • Protective enclosure acc. to laser class 1 • Includes 4 hours of training in our training center (max. 2 people) Do you need something customized? We can do that. Choose from our wide range of accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for loading =ᐳ Conveyor belts for input and output =ᐳ 3D marking and engraving function. =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized slides =ᐳ Interlock system for marking WITHOUT a protective housing, but only with PPE (personal protective equipment) for bulky parts. Our engraving lasers naturally allow for individual requests in terms of design and size! =ᐳ Made in Schweinfurt! Images may include options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser. Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking machine, laser engraving machine, laser marking system, marking laser, marking hero.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Dodpfxeh Ek H Ss Ak Aecp Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: like new (used), Year of construction: 2005, Welding machine, pulse welding machine, Elmatech Hybrid 4002, year of manufacture 2005, unused, new condition, with accessories, wire feeder DV 39, water cooling, shielding gas, serial number 9401675, MIG/MAG standard welding, pulse welding, MIG brazing, shielded metal arc welding (SMAW). Dsdpfxohwwhzj Ak Aocp

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Dodsmrm Raepfx Ak Aocp Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Condition: new, Fanuc A06B-2218-B000#0100 AC Servo Motor + A860-2050-T321 Pulse Decoder SN: C164F0C45, unused, 100% functional, scope of delivery as per photos Dcsdsm Hq A Ispfx Ak Aep

Year of construction: 2000, condition: good (used), Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum-based, brand: ESTA Model: SRF P13 JET For welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Fan power: 3 kW Capacity: 1850 m3/h Filtration area: 15 m2 Dedpsirt Amofx Ak Ajcp Vacuum: 4300 Pa Inlet diameter: 2 x 160 mm Year of manufacture: 2000

Year of construction: 2025, condition: new, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Annealing of metals =ᐳ Marking of various materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width). Simple operation and handling! Our exclusive XL laser marking system stands out due to: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect annealing engravings) • "New Generation ECO" scanner unit • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "Weightless" lift door for safe marking. EZCAD III Software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix with 2 parameters • TCP IP connectivity for external components • Industry 4.0: The status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct communication • New look and feel with a fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64-bit architecture • Improved stability through integrated control board • Optionally up to 4 axis control (integrated) • Optional deep engraving with Z-axis • More efficient algorithms for fast hatching. Dcodpfx Aek D S Nhok Aop • Completely redesigned galvo generation • 2x laser pointer for checking the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating manual and software in German • Protective enclosure acc. to laser class 1 • Incl. 4 hours of training in our training center (max. 2 people) Do you need customization? We're happy to help. Choose from our numerous accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for loading =ᐳ Conveyor belts for infeed and output =ᐳ 3D marking and engraving function. =ᐳ Automatic focus adjustment =ᐳ Rotary unit =ᐳ Motorized carriage =ᐳ Interlock system for marking WITHOUT a protective enclosure, but only with PPE (personal protective equipment) for bulky parts. Our engraving lasers naturally allow for individual designs and sizes! =ᐳ Made in Schweinfurt! Images may contain options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, marking laser, marking laser, marking hero

Condition: as good as new (ex-display), Fronius TPS 2700 Pulse Device Ready to Weld ---> Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. adjustable from the torch) ➤Ground cable 3-4m ➤Pressure regulator with new blade ➤Gas hose ➤15kg spool adapter ►►► Perfect for mobile use Dcedpevl D Idsfx Ak Aop This device is perfect for quick and mobile use. Quick to fit in the car and easy to take anywhere - yet no loss of welding quality. Also suitable for stationary use, of course. Questions: ----- How old is the machine? Our customers usually retire their devices between 3-5 years old. Sometimes more, sometimes less. What is the condition, and does the device even work properly? Yes! Everything works as it should! We disassemble, clean, replace wear parts, reassemble, and test all devices. The devices are clean; we don't have any that look completely finished! They're in great condition! Only minimal signs of wear. All pictures are original photos of our devices. They're sample images. We don't have any displays with burn holes. Can I negotiate the price with you? If you buy multiple devices, we can discuss the price. Is shipping possible? Yes, it's possible. We pack the device on a pallet and ship it insured via our shipping company. Can I view the devices somewhere? We have an online store; you can come by to pick up a device, and of course, you can also test it with us before paying. We don't have regular business hours. Everything works by appointment. All devices are assembled according to customer specifications and delivered after payment—that's our standard procedure. Do you offer a warranty? No, we don't offer a warranty. We sell like-new, used, affordable professional welding equipment, usually for 1/4 to 1/2 the new price. For the difference compared to a new device, you can buy two more from us, or you can use the savings to maintain this or several devices for many years. For example, the Fronius TPS 2700, as advertised here, costs around €8,500 new. We offer it for less than 1/3 of the new price. All prices are starting from prices; you can configure the devices with us. ...

Condition: ready for operation (used), Fanuc A06B-0218-B000 # 0100 AC Servo Motor SN:C149F0EE7 with A860-2000-T321 Pulse Decoder SN, used, as good as new, 100% functional, scope of delivery as per photos Dcsdsvrabaspfx Ak Aop

Condition: ready for operation (used), Fanuc A06B-0218-B000 # 0100 AC Servo Motor SN:C149F0EF1 with A860-2000-T321 Pulse Decoder SN, used, as good as new, 100% functional, scope of delivery as per photos Dedpfxevrabmo Ak Ascp

Condition: used, Year of construction: 2005, operating hours: 4,028 h, load capacity: 1,600 kg, lifting height: 5,490 mm, free lift: 1,820 mm, mast type: triplex, construction height: 2,320 mm, fork length: 1,190 mm, empty load weight: 1,103 kg, drive type: Elektro, construction width: 860 mm, High lift truck Load center of gravity: 600 Fork width: 185 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires Type: Bandages Front tires Condition: 80 - 100% Dedpfx Aket Ddt Te Aecp Rear tires Type: Bandages Rear tires Condition: 80 - 100% Battery Volt: 24V Battery Ah: 345Ah Battery manufacturer: GBD Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Pulse control, non-creeping tires,

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile. Dedpfx Ajtpui Isk Ascp

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, volume flow: 75 m³/h, overall weight: 1,250 kg, inner dimension width: 500 mm, total length: 2,150 mm, total width: 900 mm, total height: 800 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 14 rpm, torque: 2,750 Nm, 3 pieces of rotary valve Rotary valve Manufacturer Kreisel Type: ADG 630x800-11 LUG Version with explosion protection: Ex II1D /3DGc-20°C / +60°C Inlet and outlet internal dimensions: 500 x 800 mm Height 800 mm, Housing made of material: 1.4571 Dsdpovzk Shofx Ak Aecp Rotary valve Ø 630 made of material 1.4571 with side discs and 12 chambers, Wear/sealing strips made of spring steel C60G (0.0601 / hardened), adjustable, reversible and replaceable via inlet and outlet, external roller bearing, sealing of the shaft feedthroughs in the housing using adjustable and relubricable stuffing box packings, shaft protection sleeves, incl. Switching flag with 4 pulses/rev and protective cover, bearing shields with purge air connections, console for flange gear motor (lantern), drive via elastic coupling and gear motor, theoretical delivery capacity at 100% filling and 14 rpm: 1.25 m³/min (75 m³/h) Vibrator: Manufacturer Netter. Drive: electric Power: 0.11 kW Centrifugal force: 627 Newtons Total weight including gear motor: 1250 kg Overall dimensions: Length: 2150 mm Width: 900 mm Height: 800 mm Gear motor Motor data: SEW RF97 AM112 M2BA112M4 Voltage: 400 volts Power: 4.0 kW, Speed: 14 rpm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Dcodpfx Aey Nwtyjk Aop Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2023001552, overall weight: 550 kg, position of the milling head: Vertical, 2-axis A/C fork, total width: 655 mm, total height: 1,373 mm, mount diameter: 335 mm, type of input current: three-phase, torque: 67 Nm, rotational speed (max.): 24,000 rpm, pivoting range: 220 °, spindle motor power: 42,000 W, coolant supply: 50 bar, power: 42 kW (57.10 HP), Equipment: rotational speed infinitely variable, Unused HSD HST810-M two-axis fork head with ES510 electrospindle, HSD article H8099H0048, built 2023, never installed or powered. Supplied new by HSD S.p.A. (Italy) through HSD’s Australian partner in August 2023 and stored since then in its original HSD crates in a locked warehouse in Melbourne. The head is still sealed in HSD’s VCI bag on its steel transport frame (HSD works order OdL 2013060, production number 2023001552). Head HST810-M: A axis ±110°, C axis ±360°, HSD direct-drive torque motors (A 707 Nm max, C 1,250 Nm max), hydraulic brakes 2,000 / 4,000 Nm, Heidenhain RCN 8380 absolute encoders (EnDat 2.2), 2 arcsec, 180°/s, mass 550 kg, Ø335 g7 machine fitting, overall height 1,373 mm. Electrospindle ES510: HSK-A63, 42 kW S1 / 55 kW S6, 66.8 Nm S1 / 87.5 Nm S6, rated 6,000 rpm, max 24,000 rpm, air-oil lubrication, liquid cooled, hydraulic tool release, Lenord + Bauer 256 pulse 1 Vpp spindle encoder, rotary joint for through-spindle coolant. Included: HSD oil-air lubrication unit CC34250005 (24 V DC) and HSD 3-phase line reactor CCA4050012 (0.4 mH, 130 A), both in their HSD crates, and the HSD installation drawing H8099H0048 with SINAMICS and SIMODRIVE motor parameter sets. Suitable for 5-axis gantry and portal machines for aluminium, composites and light alloys. Siemens-ready; other controls need EnDat 2.2 capable drives. Dcsdpfxo Afb Stj Ak Ajp Condition and warranty: unused, 0 hours. The unit is outside HSD’s warranty period and is sold without manufacturer warranty. A pre-shipment run-up test at an Australian spindle service workshop, with written report and video, can be arranged at the buyer’s cost. Inspection in Melbourne by appointment. Terms: price net, FCA Melbourne (Incoterms 2020) in the original crates, payment in full before release by bank transfer or escrow. Export from Australia is subject to an export permit where required; the buyer provides end-user details. Freight, insurance, import duties and commissioning are excluded. Seller: Fleischmann’s Machines Pty Ltd, Melbourne, Australia.