Used Push Pull Mig for sale (3,360)

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Fgsdpfsy R Ipnjx Am Eoi Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m Fedpfxjzhtade Am Eogi -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set

Condition: used, Length: 480 cm Belt width: 90 cm Distance between scrapers: 32 cm Scraper height: 8 cm Side rail height: 23 cm Overall height: 47 cm Belt suitable for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors. If you need one with different dimensions, please inquire. Fedpfezdvnpox Am Esgi Please check out my other listings.

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment Fedpfeda Ha Nsx Am Ejgi More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: new, Year of construction: 2026, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. Fjdpfjgwt S Tox Am Eogi It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Technical specifications: - Load capacity of positioning table approx. 750 kg - Diameter of the rotary table 500 mm - Max. workpiece diameter 1600 mm - Height of rotary table in horizontal position approx. 750 mm - Rotary table with clockwise and counterclockwise rotation - Rotation axis of the rotary table, continuous 360° - Rotation time per revolution 12.5 sec - Tilting left and right - Tilting axis, tilting angle 180° - Tilting time for 180° tilting angle 10 sec - 2 x double foot switches for rotary table and tilting arm - Hydraulic clamping bolt for clamping the workpiece in the center of the rotary table - Clamping stroke/clamping travel of the clamping bolt 32 mm - Clamping force, pushing / pulling 80 / 48.9 kN - Clamping cylinder, internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control unit - Space requirement approx. W 1500 x D 2800 x H 1100 mm Fedpfsgxmabsx Am Esgi - Weight approx. 2500 kg - Separate control cabinet with high-frequency device for - High-frequency tools

Condition: used, Variator pulley, Vario adjusting pulley, Vario pulley, PIV gear, Vario gear, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable Fgjdpfjhmqmrjx Am Eoi -Manufacturer: VEB, vario pulley with pressure spring -Diameter pulley outside: 220 mm -Diameter mounting inside: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.8 kg

Condition: used, Flat Pulley, Timing Pulley, Multi-Belt Pulley, Timing Pulley -Toothed pulley: Ø 260 mm -Type: 56-14M85 -Take-up: hollow shaft Ø 48 mm Fjdpfx Amsmxpu Eo Esgi -56 teeth: belt width 85 mm -Dimensions: Ø 260 x 103 mm -Weight: 22 kg

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 9 grooves Fjdpfx Ajm At Hhjm Esgi -V-belt width: 22 mm -Taper socket recording: Ø 95 mm (can be changed) -Dimension: Ø365 x 240 mm -Weight: 66kg

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 7 grooves -V-belt width: 17 mm -Intake: Ø69 mm -Dimension: Ø330 x 140 mm Fedpfx Amsm At Ife Esgi -Weight: 29 kg

Condition: used, V-belt pulley, belt pulley Fsdpfjm At Iisx Am Eogi -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 4 grooves Fedpjm T Ah Tsfx Am Esgi -V-belt width: 17 mm -Receptacle: taper bushing Ø 48 x 50 mm (can be changed) -Dimensions: Ø 260 x 80 mm -Weight: 26.1kg

Condition: used, Flat pulley, belt pulley, drive pulley, roller pulley -Pulley: flat pulley material cast aluminum Ø 290 mm -Width 200mm Fgodpfxench Ius Am Esi -Intake: Ø 60 x 120 mm -Bolt circle: Ø 80 mm M6 -Dimensions: Ø 290 x 200 mm -Weight: 6.3 kg

Condition: good (used), V-belt pulley, pulley -V-belt pulley: pulley with 8 grooves Fgsdpfxepix I Uj Am Eji -V-belt width: 17 mm -Holder: Ø 80 x 160 mm, groove 22 mm -Hole spacing: 130mm M16 -Dimensions: Ø 212 x 160 mm -Weight: 28.5 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: 5-groove pulley type SPB 280-5 3535 -V-belt width: 17 mm -Receptacle: Ø126/115 mm for taper clamping bush 3535 (Ø can be changed) Fedpfspix Nnsx Am Eegi -Dimension: Ø287 x 100 mm -Weight: 18.8kg

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine Fedsdy Hrdopfx Am Eogi A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: good (used), Features: Used roller conveyor transfer unit from Mannesmann Demag Feet must be ordered separately Condition: Fully functional, with signs of wear Ideal for rapid material transport Professionally dismantled and packed 5 units in stock Price per unit Transfer Unit Transfer units with chains or belts gently lift the conveyed goods and gently place them on the target section. For this purpose, both sections must briefly stop during the lifting and lowering process. Technical Data: Roller conveyor dimensions Overall length: 935mm Overall width: 920mm Roller specifications Mounting length: 430mm Diameter approx.: 50mm Material: Steel, galvanized Frame specifications Frame height: 135mm Frame width: 30mm Material: Steel Tailor-made solutions for your intralogistics Fgjdpedtdt Hefx Am Eji For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to prepare a customized offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: used, Smicon AFT 2/1500 Fumigation, Fumigation System, Fumigation Machine, Disinfection Unit Fumigation involves filling a room with a toxic gas to control pests/bacteria. Because these are toxic gases, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to combat woodworm. This is a device used for disinfecting rooms. Formaldehyde is boiled on the left hotplate and, together with condensed water (right hotplate), is placed in a room via an airflow, where it kills all bacteria. Former list price: €10,900 net You can find more new and used items in our shop! International shipping costs available upon request! Fgsdpfodviynex Am Eji Item condition: used

Condition: used, Smicon FTA 1500U-6L Fumigation System, Fumigation Unit, Disinfection Unit Fumigation involves filling a space with a toxic gas to control pests/bacteria. Because these are toxic gases, special safety measures are required. Fumigation is commonly used for storing organic materials (e.g., grain storage, in warehouses in ports, silos, mills), as well as in churches to control woodworm. This is a device used for disinfecting spaces. Formaldehyde is heated on the left hotplate and, together with condensed water (right hotplate), is placed in an airstream in a room, where it kills all bacteria. Former list price: €9,900 Item condition: used Fjdpfedviyxox Am Eogi You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 247 mm -Transport roller width: 607 mm Fsdpfx Amjd I R S Ej Ejgi -Square mount: 25 x 25 x 30 mm -Dimensions: Ø 247 x 607 mm -Weight: 21 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 248 mm -Transport roller width: 610 mm -Hole: Ø 30 x 60 mm, Ø 25 x 75 mm Fgodsd I R S Hepfx Am Eji -Dimensions: Ø 248 x 840 mm -Weight: 27 kg

Condition: good (used), V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Holder: Ø75 x 90 mm taper clamping bush 90 x 90 NE (Ø can be changed) -Dimensions: Ø320 x 100 mm Fsdovqbanspfx Am Eogi -Weight: 32 kg

Condition: new, machine/vehicle number: G-CL-350-FR-EC, input voltage: 230 V, volume flow: 350 m³/h, noise level: 61 dB, total height: 600 mm, total length: 430 mm, total width: 340 mm, overall weight: 40 kg, ISI G-CLEANER Mechanical air filter device Type: 350 FR Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gaseous substances. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 350 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: top rear with 4 connections 50 mm Filter configuration: - Pre-filter mat F 5 Fsdpfsvrygpox Am Esgi - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of pressed, specially impregnated shaped carbon Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 61 db (A) Dimensions: length 430 mm / width 340 mm / height 600 mm Weight: 40 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 Fodpfx Aou Sv S Esm Ejgi -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg Fedpeu Sv Umjfx Am Eegi