Used Quad 700 Ccm for sale (14,406)

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Bsdpfx Aaju Hq Rleqslp Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Year of construction: 2005, condition: ready for operation (used), Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible. Bledpfxjxph Rao Aaqep

Condition: used, Year of construction: 2008, Bandsaw Macc 700 Special Cutting capacity: 700 x 500 mm Cutting capacity at different angles: Round: 90° Ø 500 mm, 45° Ø 320 mm, 60° Ø 150 mm Square: 90° 500 mm, 45° 320 mm, 60° 150 mm Rectangular: 90° 700 x 500 mm, 45° 500 x 460 mm, 60° 500 x 150 mm Cutting angle/swivel range: 45° to the right, 60° to the left Blade: 5540 x 41 x 1.3 mm Blade speed: 20–90 m/min Motor power: 4 kW Overall dimensions: Blodpfx Aaoxn A Eceqop Width: 1500 mm Length: 3500 mm Height: 2400 mm Weight: 2400 kg

Condition: used, Year of construction: 2007, Turning length 700 mm Max. turning dia. 460 mm Spindle speeds 4000 rpm X/Z travel 260/795 mm Bedpoxdhxtefx Aaqslp Turret w/12 stations Control: MSX-850 III Equipped with: Various tool holders

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt Bljdpeu R Dhxefx Aaqsp current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: ready for operation (used), Year of construction: 2020, x-travel 700 mm y-travel 650 mm z-travel 600 mm weight of the machine ca. 7500 kg The machine is in very good condition and offers precise 5-axis machining with a generous working area, high spindle power and an extensive tool magazine. Ideal for demanding milling and drilling work – all technical details can be found below. HEDELIUS ACURA 65 5-axis simultaneous machining centre Positioning accuracy: A=8 µm/1000 mm Heidenhain iTNC640 Bledpfswmwxqox Aaqop X: axis 700 mm Y: axis 650 mm Z: axis 600 mm Dimensions of rotary swivel table: Ø 650x540 mm Swivel range: +30° – -115° Max. load on rotary swivel table: 500 kg Interference circle diameter: 500 kg Spindle: 14,000 rpm – SK40 Number of positions in the tool changer: 65 pcs. Machine no.: 30056107 Year of manufacture: 2020 Type: ACURA 65 - 40/640/700/12

Condition: good (used), workbench, work table, assembly bench, assembly table, work table -Workbench: with drawers, solid construction -Width: 3000 mm -Depth: 700 mm Bodpfx Aaoxbyzhoqelp -Height: 900 mm -Drawers/cabinet doors: 2x each, lockable / without lock/key, see photos -Weight: 206 kg

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system Bledew Uqmpepfx Aaqep filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: new, 6 St. 100 kg range L-W-H 705 x 736 x 1019 mm weight 126 kg Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable Bledjw U U Rfepfx Aaqop

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges Blodpfxewgwnlj Aaqep - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2022, condition: ready for operation (used), Main Drive Number of spindles 1 Spindle speed range 4000 This DMG MORI NLX 2500 Y / 700 was manufactured in 2022. A robust horizontal turning machine, with Y axis and live tooling, ideal for precision machining. Consider the opportunity to buy this DMG MORI NLX 2500 Y / 700 horizontal turning machine. Contact us for more information. Application Types Bsdpfx Aexb E H Aeaqslp Turning

Condition: good (used), functionality: fully functional, 1 x Xerox 700i Digital Colour Press with: 1. Dual OHCF tray, 2. FIM module, 3. Light Pro. Finisher, 4. Squarefold trimmer Data: 1. Colour prints: 1,142,946 2. B/W prints: 525,514 3. Total prints: 1,668,460 Bodpfx Asxdx Edsaqolp Tested and in working condition – serviced annually and very well maintained. • Packed on 4 pallets, ready for shipment Inspection welcome – price is net + VAT or for export

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Bledeim S Hqepfx Aaqep Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Diameter: 630 mm Inner diameter: 135 mm Rear mount: 110 mm Mounting: 4 Allen screws pitch circle 220 mm Bsdpfxsbptn Ae Aaqslp

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Blodsw El Nhjpfx Aaqsp

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm Blsdpfow Dccvox Aaqsp -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Blsdpfx Aexamqmsaqep Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine does not include a chuck

Condition: excellent (used), Year of construction: 2018, operating hours: 6,300 h, functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 420 mm, spindle motor power: 18,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, Double-spindle lathe DMG MORI NLX 2500/700 with Y-axis and IRCO Simag loading magazine Year of construction: 2018 Control system: Celos with MAPPS M730UM Switch-on hours: 9,300h Program running hours: 6,300h Technical data: Main spindle speed: ISM 80, 10 - 4,000 min-1 Drive power: 18KW Chuck: Kitagawa 10" / 254mm Counter spindle speed: ISM 41, 100 - 4,500 min-1 Drive power: 11KW Chuck: Kitagawa 6" / 159mm Turret: 20 stations Bedpet I E U Tefx Aaqjlp Speed AGW: 10 - 10.000min-1 Drive power: 5.5 KW Tool holder: BMT 40 Travel distances: - X-axis: 250mm - Z-axis: 705mm - Y-axis: 100mm (+/- 50mm) - C-axis: 0.001° Counter spindle with tailstock function Accessories: - IRCO Breuning Simag 80.1.R.II loading magazine - Chip conveyor - Coolant system (incl. counter spindle flushing) - Manual tool measuring arm - Parts ejector main and counter spindle - Workpiece conveyor belt - Automatic door - Robot interface - Safety fence Interface - Signal lamp

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Bjdev U Dn Nepfx Aaqjlp Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures Bodst Hf T Hopfx Aaqslp machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, Composed of: 1) Dough storage hopper Mod. 'STAR' 2) Conveyor L=500 Mod. 'TRL' 3) Dough extruder Mod. 'RON 1/480' 4) Conveyor L=700 Mod. 'MCI 690' 5) Dough flouring unit L=700 Mod. 'B/M 700L' 6) Multi-roller unit Mod. 'MUL 700' 7) Conveyor L=700 Mod. 'MCI 690' 8) Fat extruder Mod. 'EG-7-E' 9) Overlapping conveyor belts Mod. 'NPP/200' 10) Conveyor L=700 Mod. 'MCI 690' Year of manufacture 2006 Bledpfxowxwiaj Aaqjp

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Bljdpswxti Nofx Aaqep -Tool cabinet. Drawer cabinet, sturdy design -8 drawers: division/height see photos -lockable: without key -Dimensions: W 525/700/H 850 mm -Weight: 110 kg

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2050 mm Measurements depth 3100 mm Measurements height 2120 mm Machine weight 6200 kg Main Drive Number of axis 4 Bljdpfx Aaowvm Adeqsp Movement X-Axis Movement 260 mm Y-Axis Movement 100 (±50 mm) Z-Axis Movement 795 mm Additional Equipment Counter-spindle: Yes / Y-axis: Yes / Driven tools: Yes/ Bar loader: Yes Number of tool stations: 12 (10) / Shank height for square tool: 25 mm / Boring bar tool shank: Main Spindle: Max. 50 mm / Sub-spindle Max. 32 mm / Boring bar tool shank: Main Spindle: Max. 50 mm / Sub-spindle Max. 32 mmz / Turret switching time: 0.25 s / Max. speed of driven tools: 6000 rpm Rapid traverse speed: X/Z-axis: 30000 mm/min / Y-axis: 10000 mm/min / C-axis: 400 min⁻¹ This 4-axis MORI SEIKI NL 2500 SY/700 turn-mill centre was manufactured in 2004. Ideal for precision machining, it features a robust design and advanced control system. Consider the opportunity to buy this MORI SEIKI NL 2500 SY/700 turn-mill centre. Contact us for more information. Application Types Turning

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm Blodjwfdhcjpfx Aaqsp adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: used, cardan shaft, cardan shaft, universal joint shaft, drive shaft -Cardan shaft:Cardan joint shaft with length compensation and double joint on both sides -Dimensions retracted: 700 mm Blodpfxsux Sb Ao Aaqop -Flange: bolt circle Ø 52 x 6 mm -Flange: outside Ø 65 mm -Sliding length: see photos -Total dimensions: Ø 65 x 700 mm -Weight: 4 kg