Used Radial Riveter for sale (987)

Condition: excellent (used), Year of construction: 1983, bore capacity in steel (diameter) 32 mm arm length 636 mm workpiece height max. 720 mm spindle turning speed range 38 - 2000 U/min threading 38 - 643 stroke 450 mm spindle stroke - max. 170 mm total power requirement 6 kW Ppsdpfxjwvl Ire Agkju weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m Left / right rotation.

Condition: used, Radial drilling machine MAS VR4A The machine is located in an operating facility in Bremen and can be tested there. Technical data MAS VR 4A Max. drilling diameter in steel (50 kg/mm²) 50 mm Max. drilling diameter in gray cast iron (25 kg/mm²) 60 mm Max. reaming diameter in steel (with guide) 200 mm Largest thread in steel M30 Largest thread in gray cast iron M42 Distance from spindle center to rotary table guide (max.) 1,250 mm Distance from spindle center to rotary table guide (min.) 320 mm Largest hole circle diameter 2,940 mm Smallest hole circle diameter 1,105 mm Distance from spindle to base plate (max.) 1,340 mm Distance from spindle to base plate (min.) 280 mm Vertical adjustment of the cantilever arm 750 mm Horizontal adjustment of the drilling slide 930 mm Swivel range of the cantilever arm 360° Clamping surface of the base plate 1,475 × 900 mm Height of the base plate 200 mm T-slots 3 × 25 mm T-slot spacing 190 mm Diameter of the drilling spindle head 70 h6 mm Spindle mount Morse taper MK4 Diameter of the drilling spindle 40 mm Stroke of the drilling spindle 310 mm Number of speed steps 16 Speed range 28 – 2,500 rpm Number of feed steps 16 Feed range 0.05 – 2 mm/rev Power of the drilling motor 4 kW Speed of the drilling motor 1,420 rpm Power of the feed motor 1.5 kW Podpfozcy Aiox Agkjpu Speed of the feed motor 1,400 rpm Power of the hydraulic motor 0.55 kW Speed of the hydraulic motor 1,400 rpm Power of the coolant pump 0.125 kW Speed of the coolant pump 2,800 rpm Total weight 2,700 kg Total power requirement 7 kW Machine dimensions (L × W × H) 2,250 × 1,055 × 2,970 mm ____ Our general terms and conditions apply. Furthermore, the seller is not liable for typing or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads Ppedpfx Asu Ictnegkju - hydraulic power unit accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min Podpfxou Id Awj Agkspu feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm Ppjdpfjwid Aujx Agkju drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Ppodpfx Agev S Ay Sokeu Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm arm length: ./x. . 400 / 50 mm Pedjwi Iqvjpfx Agkepu drill head horizontal traverse: 400 mm drilling head vertical adjustable: 400 mm bore spindle stroke: 150 mm spindle taper MT: 4 grinding spindle speed: 100 - 2000 U/min Arm length: Spindel: min./max: ca. 400 / 50 mm cantilever adjustment vertical: 850 mm cantilever adjustment horizontal: 400 mm arm: Länge: 1360 arm horizontal: schwenkbar mm/min number of revolutions per minute of drill spindle:: 100...2 step U/min. feed steps: 0,1 / 0,2 / - step mm/U Table dimensions: 00 x 510 mm distance table - lower edge spindle: min./max.: 350 / 800 mm total power requirement: 2,4 kW weight of the machine ca.: 1,8 t dimension machine xH: 1,3 x 1,3 x 2,25 m Equipment: 2x foot rail Attachment option for a vertical table Accessories: Various clamping devices *

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Ppsdju Nifyepfx Agkju Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m Pjdpfou Id Dbsx Agkopu This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm Pjdpfx Aovhbpqsgkopu arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm Podpev Ay T Dofx Agkepu range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump *

Condition: used, Year of construction: 1960, Technical details: Psdex Afn Nepfx Agkopu workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: CE marking, CARIMATI CTU 40/45 x 1000 radial drill press in excellent overall condition, fully functional machine, tested and ready for use. Key features: drilling capacity 45 mm Morse taper MK4 Podpfx Ajzdqklsgkjpu spindle speed 30 – 2650 rpm automatic feeds 0.05 – 0.3 mm/rev spindle stroke 250 mm table stroke on column 1000 mm power supply 400V three-phase complete with chuck, vise, and quick-change chuck column and head locking coolant system machine complies with CE standards Transportation is the responsibility of the buyer. Loading onto the truck will be carried out by us. If customized/tailor-made packaging is required for transport, the related cost will be borne by the buyer. Machine sold as is, with no warranty.

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Podpfxsuxrtfj Agkjpu Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Podpep Atipsfx Agkopu Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Pedorn Riqepfx Agkspu Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: excellent (used), functionality: fully functional, OMGA Radial Arm Saw RN 450 Cutting width at 90° max: 450 mm Maximum cutting height: 80 mm Saw unit adjustable in two planes Saw blade speed: 3000 rpm Main motor power: 2.21 kW Blade diameter: 300 mm Power supply: 220V Ppedpfsyzp Dnex Agksu

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Ppjdpfx Agsyym Afskou Max cutting height: 110 mm Saw unit adjustable for angle in two planes Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives Podpsv If T Tjfx Agkepu X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Psdpfx Agoy Ttrtokspu Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps Podpfxeu T Ty Ho Agkopu - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Podpedzp T Njfx Agkepu Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time can be programmed continuously - Riveting pressure can be adjusted continuously via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades with diameters of 400 to 2000 mm. The segments were manually placed on the support disc and fixed with straight rivets. The counter-rotating riveting unit rivets the shank simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for building a special-purpose machine.

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Ppsdpfx Aofbt Huegksu Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Ppodpfoy Rznwox Agkeu Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Ppedpfx Asv Hngmjgkou