Used Recoiler for sale (83)

Condition: new, functionality: fully functional, Year of construction: 2025, product width (max.): 1,250 mm, working width: 1,250 mm, conveyor belt width: 1,250 mm, product height (max.): 1 mm, Machines for sheet metal winding from bigger to smaller coils of inner diameter of 300 mm and biggest mass of 300 kg 1250mm. The winder has an integrated manual counter, shears for transversal cutting and a probe for removing the winded sheet meta SAS small coil recoiler for coils up to 300kg, 1250 mm. Nkodpfx Abswqc I So Uew

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Nkedpfxehx R Ets Ab Uow Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Nksdpfx Aeua Nngeb Usw Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Nkedpfewvv Rqox Ab Uow Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Year of construction: 1986, condition: good (used), strip width: max. 200 mm strip thickness: 0,1 - 1 mm coil weight: 0,5 t Njdpebh Ucbofx Ab Uskw mandrel Ø: 304 mm

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm strip thickness: 0,4 - 3 mm coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm Nkjdpfxjdn I Hrs Ab Uew

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm Nkjdpfxsbh Ubwo Ab Uow

Year of construction: 1995, condition: good (used), strip width: max. 420 mm strip thickness: max. 12 mm Nksdebibqwepfx Ab Uow coil weight: 2,4 t

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm strip thickness: max. 3,5 mm coil weight: 20 t Nsdpfx Abeg Ewano Ujkw mandrel Ø: 600 mm

Year of construction: 1985, condition: good (used), strip width: 100 - 750 mm Nsdpjd Ha Hbjfx Ab Uskw strip thickness: 0,5 - 4 mm coil weight: 10 t mandrel Ø: 406/508 mm

Year of construction: 1995, condition: good (used), strip width: max. 1.900 mm strip thickness: 0,3 - 3 mm coil weight: 25 t Njdpeg Iigvefx Ab Ujkw mandrel Ø: 508 mm

Condition: like new (used), functionality: fully functional, coil inner diameter: 508 mm, coil outer diameter: 2,000 mm, coil weight: 16,000 kg, coil width: 1,000 mm, product width (max.): 1,250 mm, year of last overhaul: 2022, Self-centering FLENDER recoiler + 2 self-centering FROHLING decoilers Coil set: TWO DECOILERS and ONE RECOILER Nkedpfxou Hlauo Ab Usw Brand: - Frohling for decoilers - Flender for recoiler Completely overhauled and upgraded with AUTO-CENTERING and linear guides in 2022 (units were already in excellent condition, but lacked all accessories and the CPC auto-centering system) Capacity: 16MT Coil ID: 508mm / OD: 2000mm Max strip width: 1100mm (modifiable to 1250mm) Max line speed: 240m/min Independent lubrication with filter and pump Supplied without motors and speed gearboxes Ready for any inspection at our warehouse in Rovereto (TN), Italy If you have any questions, do not hesitate to contact us. IF INTERESTED, PLEASE CONTACT US — WE WILL CERTAINLY REACH AN AGREEMENT.

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Nsdpfelwtzyjx Ab Uskw Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Nodpjrn Sqhsfx Ab Uokw Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Nsdpfx Aeihf Tweb Uekw Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: Nedpfxstiy Nto Ab Uskw L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: Nkjdpfewx Aadex Ab Uow - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical specifications: - Dowel driving unit for simultaneous gluing and dowel insertion Nodpfx Absw Rhlhs Ujkw - Dowel feed via maintenance-free vibratory feeders - Fully automatic, maintenance-free electronic control with selector switch FLUSH/GLUE/GLUE-INSERT - Self-contained gluing system - 1 stainless steel container 5 l for glue and 1 stainless steel container 5 l for water - Lightweight, handy, and recoil-free gun for 8 mm dowels - Capacity: 45 dowels per minute - Electrical connection: 220 V, 1 Ph, 50 Hz - Compressed air connection: 6 bar - Dimensions: 650 x 650 x 1100 mm - Weight: 110 kg Availability: short notice Location: Röllbach

Year of construction: 2020, condition: as good as new (ex-display), Hydraulic press for tests and retouching of dies Brand: MHG Model: ER.2S.DM-300/2100 Serial number: 927 Year: 2020 Required power: 40kw Nsdpfx Abok Sgvyj Uekw Hydraulic oil: 1000Ltrs. deposit + 200 liters. circuit filling Total number of cycles: 403 (NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300t Number of cylinders: 3 Maximum tooling dimensions: 1400x1400mm Maximum tooling mass: 16,000kg Maximum working table and mobile table opening: 1690mm Minimum opening of work table and mobile table: 960mm Maximum mobile table travel: 730mm Approach speed: 92 mm/s Recoil speed: 93mm/s Stop time: 0.2s Safety distance: 500mm Weight with empty tank: 35.000kg

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. Nedpfxjhzbipj Ab Uokw - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 2013, condition: used, functionality: fully functional, This is a Rational SCC 61 combi-steamer from the premium manufacturer Rational, in electric version. This combi-steamer comes equipped with a hanging rack featuring 6 slots. The unit has been completely overhauled in our in-house workshop and is fully operational. We offer the unit with a 6-month warranty on all electrical components. Please note: The stand depicted in the photos is not included in the offer but can be purchased separately if required. Nksdpfsyub Tajx Ab Usw Service: We are happy to assist you in finding a certified Rational service partner. Looking for a specific Rational model? Ask us! We have access to an extensive selection of both used and new equipment. We offer expert advice on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic or Pro. Our used equipment service includes: • 6 months warranty on electrical components, limited to replacement of faulty parts (excl. labor costs) • High-quality brand equipment at fair prices • Professional overhaul, inspection & expert cleaning • Tested & fully functional – or money back • Flexible shipping or collection • Competent advice before and after purchase • Provision of user manuals, wiring diagrams & spare parts • DGUV V3 electrical safety testing This combi-steamer accommodates 6 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path, the size of the food, the loading quantity, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical Data: • Dimensions (W x D x H): approx. 847 x 776 x 782 mm • Power connection: V: 400 / kW: 11.0 / Hz: 50/60 • Capacity: 6 x 1/1 GN • Weight: approx. 103 kg • Serial number: E61SH13122381466 • Year of manufacture: 2013 Condition: used, overhauled, fully operational Additional Information: • With CareControl self-cleaning system • In combi-steamer mode, 3 operating modes available: Steam (30°C to 130°C), Hot Air (30°C to 300°C), Combination (30°C to 300°C) • Core temperature probe • Hand shower with automatic recoil • 8.5-inch color display and touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning – including overnight • 3-stage adjustable humidity injection (climate control) from 30°C to 260°C • 5 programmable proving stages • USB interface • Seamless, hygienic cooking chamber with rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by special arrangement Subject to change and error. Do you have questions, need advice, or want to see the item in person? We're available by phone during our business hours: Monday-Friday 09:00-13:00 and 14:00-17:00. Sales are made exclusively according to our general terms and conditions (AGB).

Condition: not inspected (used), functionality: unexamined, ⚠️ Important Notice: For Business Customers Only (B2B) This sale is exclusively intended for entrepreneurs as defined by § 14 BGB (commercial operators, self-employed persons, freelancers). Sale to private individuals (consumers) is excluded. By submitting a bid or making a purchase, you expressly confirm your status as a business entity and that the acquisition is for your commercial or self-employed professional activities. _____ For sale is a strip coating line. The system originates from insolvency assets and was in successful operation until the facility was closed. Technical specifications & capacities: • Material: Suitable for aluminum and stainless steel coils. • Strip width: 80 mm up to max. 600 mm. • Material thickness: 0.1 mm to 2.0 mm (for aluminum). • Processing speed: approx. 20–25 m/min. • Coil weight: Max. 3,000 kg. • Inner diameter: 400 mm (expandable to 500 mm with available adapter chucks). • Coating options: From narrow color stripes (starting at 7 mm) up to full-surface coating. • Temperature range: Oven operation at approx. 250°C. System design & components: • Infeed: Expandable decoiler with height-adjustable coil transport cart (load capacity 3,000 N). • Coating unit: Double coater for precise paint application using steel roll deflection. • Drying: Drying and firing zone with two Eclipse gas burners and control panel. • Safety & Environment: FID probe for continuous monitoring of solvent concentration in the oven, including control unit. • Cooling: Cooling section with fresh air supply before exiting the oven. • Post-processing: Integrated slitting device for strip longitudinal cutting (incl. slitting knives and spacer rings). • Outfeed: Hydraulic strip guiding, friction plate brake, and transfer arms at the recoiler. Nsdpfxsyw Hiye Ab Uokw Scope of delivery: • Complete system as described. • Accessories (spacer rings, slitting knives, adapter chucks). Inspection & transaction: • Condition: Used, fully operational up to decommissioning. • Location: Wuppertal. • Dismantling/transport: Dismantling and transport to be carried out by the buyer at their own expense. • Invoice: You will receive a proper invoice with VAT shown separately. Terms of sale and delivery: • Condition: The system is sold as is from its current location. • Disclaimer: As this is a B2B transaction between professionals, the sale is made to the exclusion of any warranty and guarantee. • Inspection: On-site inspection is expressly recommended.

Year of construction: 2008, condition: ready for operation (used), travel distance X-axis: 450 mm, travel distance Z-axis: 850 mm, overall weight: 12,000 kg, This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. • Center distance: Small (2 cross slides) 400 mm; Long (2 cross slides) 800 mm; Long (3 cross slides) 800 mm • Swing diameter: 180 mm • Max. workpiece weight: 20 kg • X-axis (cross slide) • Speed: 0.001–1,500 mm/min • Resolution: 0.00001 mm • Z-axis (longitudinal slide) • Max. travel: 850 / 1,600 mm • Speed: 0.001–25,000 mm/min • Resolution: 0.00001 mm • Turning turret • 8-station: Capto 6 fixed • 12-station: VDI 40 fixed • 8-station: VDI 30 driven fixed • Max. drive speed: 4,000 rpm Njdpfxex D Iwvo Ab Ujkw • Drive power: 2.5 kW • Option: Active longitudinal measuring rod on turret (Capto or VDI) • Grinding spindle head • Mounting angle: -25° / +25° • Grinding speed: 50 m/s • Wheel size: Ø 400 x 50 (63) x 127 mm • Internal grinding attachment • Spindle positions on swiveling plate: 3 • Spindle position: 0° / +45° • Automatic positioning in 3 positions • Internal grinding spindle range: 1,200–120,000 rpm • Available spindle speeds: 24,000–120,000 rpm • Workpiece spindle head (fixed) • Speed range: 1–7,500 min⁻¹ • Drive power: 10.5 kW • Tool holder: MK4 / DIN 55026 A4 • Load during surface grinding: 500 Nm • Roundness accuracy: 0.0004 mm • Workpiece spindle stock (swivelable) • Swivel range: 0–10° • Resolution: 0.0001° • Speed range: 1–4,000 min⁻¹ • Drive power: 10.5 kW • Tool holder: MKS / DIN 55026 A6 • Load during surface grinding: 500 Nm • Roundness accuracy: 0.0004 mm • W-axis / Tailstock • Max. travel: 450 / 1,650 mm • Speed: 0.001–1,500 mm/min • Fine adjustment for cylindricity corrections: ±0.01 mm • Option: Quill recoil ±0.40 mm • Quill diameter: 60 mm • Mounting taper: MK4 • Quill travel: 45 mm • Optional synchronous tailstock: 1–7,500 rpm; drive power 10.5 kW; mounting taper MK4 / DIN 55026 A4 • Dressing • Standing dressing tool, holder with MK1 mount • Single-point diamond / shortened tile • Dressing spindle with axial drive on swivel holder: Ø 58 / 89 / 100 mm max • Dressing spindle with axial drive at the rear: Ø 100 mm max • Connection values • Total connected load: 45 kVA • Minimum air pressure: 5.5 bar • Total weight: 7,600 / 12,000 kg • Condition and service • Still powered up and fully functional • No roughing work • Annual maintenance by Studer Additional equipment • Shaft automation (included in scope of delivery) • Grinding wheels (included)

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. • Suitable for: High-precision stamping, blanking, washers, discs, continuous strip processing Additional equipment • Manual decoiler Nkedex E Ea Hepfx Ab Ujw • Servo roller feeder: G+K WVS/L 150 • Motorized recoiler

Condition: new, Year of construction: 2026, CORMAK RPL380 Firewood Processor (Saw–Splitter Machine) Key features and functions: Performance: Efficient operation with capacity of up to 8 m³ of wood per hour, depending on wood type. Multifunctionality: Combines a chainsaw, log splitter, and conveyor belt in one machine, increasing efficiency and saving time. Versatility: Suitable for both professionals and individual users; capable of processing various types of wood. Engine: 15 HP petrol engine delivers high power for efficient cutting and splitting. Time-saving: Wood processing time is significantly reduced thanks to the integration of three functions in one unit. Reliability: Designed for use in sawmills, the wood industry, and for firewood or construction wood production. Equipment: Features a STIHL chainsaw guide bar and an oil tank located at the rear of the housing. Precision: Cross wedge enables effective splitting, while cutting can be performed to the desired length. Adjustment: Wedge height can be easily adjusted to match log diameter using a lever. Safety: Built-in safety systems protect the operator. Mobility: Equipped with wheels and a tow hitch for easy transport between work sites. Conveyor system: The belt feeds wood into the splitter and then carries away split logs. It can be folded in half and positioned vertically. Certifications: CE certified and supplied with full technical documentation (DTR). Powerful 24L hydraulic system drives: ✅ Feed conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20 tons of force ✅ Output conveyor The machine is equipped with a 9-stage adjustable splitting wedge, allowing logs of different diameters to be split into 2 or 4 pieces. ✅ Adjustable cutting length ✅ Log holding clamp ✅ Central chain lubrication system Technical Specifications Engine Model: Lancin G420F Power: 9.0 kW (15 HP) Displacement: 420 cc Fuel: Petrol Fuel tank capacity: 5.4 L Starting system: Electric / manual (recoil) Recommended engine oil: 15W40 (1.7 L) Hydraulic System Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Performance & Cutting Parameters Max splitting force: 20 t Splitting wedge: 4-way Max log diameter: 380 mm Min / max cutting length: 190–600 mm Chainsaw bar length: 18” (45 cm) Capacity: approx. 8 m³/h Feed Conveyor Length / height: 1000 mm / 910 mm Nsdpfx Abjyw I Epo Uskw Dimensions (L × W): 1040 × 254 mm Max incline angle: 40° Output Conveyor Dimensions (L × W): 3200 × 254 mm Speed: 27 m/min Wheels & Tires Size: 135/70R12 Pressure: 2.5 bar Dimensions & Weight Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg