Used Renishaw Messtaster for sale (27)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Kedpfxoxyungs Ab Toww Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Product description: Renishaw OMP60 SK40 measuring probe ----- Item condition: Very good condition and fully functional. Kedpfx Aboyvrmhe Tjww The item comes from a company liquidation. Internal number: 852

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD Kwedpfx Absym Dt He Tsw Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: excellent (used), RENISHAW System 3R-656.31-3 Macro probe with 3 mm stylus ball. Used. Fully functional. Kodpfxeyk T Hde Ab Toww

Condition: excellent (used), RENISHAW System 3R-656.31-5 Macro probe with 5 mm stylus ball. Used. Fully functional. Kwedpjyk T Etofx Ab Tow

Condition: used, Used Renishaw MP3 touch probe Kwedpfeyddrwjx Ab Tsw Tool taper MAS BT 50

Condition: used, Used Renishaw MP3 touch probe Kedpfx Aeyddrqeb Tsww Tool taper CAT 50

Condition: used, Used Renishaw MP3 touch probe Kwedpfxeyddrds Ab Tsw Tool taper CAT 40

Condition: used, Used Renishaw MP10 touch probe Kwjdpfeyddq Tjx Ab Tow Tool holder: capto C6

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) Ksdpfxoybbqxe Ab Tsww - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 Kwjdjw S E Dkopfx Ab Tjw -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system Kjdpfx Asw S E E Ijb Toww -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, printed circuit board electronic module Kwedpsw S E Eujfx Ab Tjw -Manufacturer: Stiefelmayer, circuit board from coordinate measuring machine Stiefelmayer C 100 413514 -Type: 413100-89 -Dimensions: 115/80/H55 mm -Weight: 0.2 kg

Year of construction: 2016, condition: like new (used), Renishaw Roughness measuring kit for REVO incl. - SFP1 Modul - SFS1 Probe straight - SFS2 Probe cranked - SFA roughness standard Kodpfx Aboni Arnj Teww - SFCP positioning device for SFP1 - RCP TC-2 modul changer

Condition: new, Renishaw SA26DBA104B30S Resolute FS measuring head Siemens 26BIT / 104DIA 3.0M M12 , serial no. according to photo ,unused in original packaging, 100% functional, scope of delivery according to photos Kwodpfx Asi Ecm Nsb Tjw

Condition: new, Renishaw SA26DBA115B05S Sensor , serial no. according to photo ,unused in original box, 100% working, scope of delivery according to photos Kedpfxei Ecm Tj Ab Toww

Condition: used, Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Kwjdpfornagpsx Ab Tow Measuring probe for measuring machine Serial: 77501 - A Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting M8 thread Head mounting with MS shaft Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 M8 threaded connections for probes (4 blanking plugs) total weight 280g used in good condition

Condition: used, Probe for measuring machine, measuring head, probe head RENISHAW Probe Kit - TP 20 System Included are: Kjdotpkybjpfx Ab Teww 1x star probe with thread M2 (5x stylus M2 with ruby ball Ø 2mm; length 15mm; star Ø 38mm; 1x 6-way probe head = probe module TP 20 (6-way) 1x extension 50mm, probe extension NVMS-50 (with 2x mounting wrench) in original plastic storage box used in good condition

Condition: excellent (used), Various Renishaw TP2, TP6, TP20gemäß figure in the offer. Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!) Kwsdjdy Anxopfx Ab Tsw

Condition: excellent (used), Various Renishaw probe heads PH10M as shown in the offer. Kwjdpfx Absdy Anvj Tow Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: excellent (used), Various Renishaw extensions as shown in the offer. Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! Kwededy Anpspfx Ab Tow (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: excellent (used), Various Renishaw probe heads MIH as shown in the offer. The MIH is equipped with an automatic change recording for fast and reproducible button changes. Compatible with the most Renishaw measuring switches. An integrated LCD-position display for easy programming and storage of up to 20 measuring switch positions. Extensions can be used up to 300 mm. Technical data Weight 580 g Mounting of the measuring probe Auto recording (Note: not for probes with multi-channel technology) Mounting of the probe Shafts of MS series Interface 200 3 PI, PI 7-3 Measuring button status indicator LED Cable connection 5-pin DIN-180 ° connector Ability to index the A axis 0 ° to 105° in steps of 7.5 ° Indexing capability of the B-axis ±180 ° in steps of 7.5 ° Reproducibility of the positions (2s) 1 µm (TP6A with 21 mm button usage) Maximum extension 300 mm Maximum permissible torque 0.45 nm Technical data according to the manufacturer. Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! Kwedpfxody Apms Ab Tew (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Kedpfx Abodv I Abe Tjww Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo

Year of construction: 2007, condition: excellent (used), Renishaw scanning modules for SP25M Incl. 1 pc. stylus holder SH25-4 Top condition, was used normally until the end. Kodpefn Ea Sofx Ab Tjww

Condition: used, functionality: fully functional, Renishaw Probe head PH10M (new style) incl. - Head PH10MQ - Controller PHC10-2 - Handcontrol HCU1 - on demand PAA1 probe adapter (or other type) Kedpfewpq E Asx Ab Teww On demand: Probe TP2, 20, 200, TP7 ro SP25 (SP600)