Used Resonator for sale (105)

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Ibjdsv Ip R Aspfx Anrsa

Condition: used, The resonator of a Trumpf laser resonator is for sale here in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Trumpf • Laser system: L-3050 (6kW, built in 2005) Shipping available on request (also internationally) Iedpfsyfnb Sjx Anrjba You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed Isdpfx Ajzii A Denrjba General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Isdpjzii Awjfx Anroba Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Completely new resonator available at the end of 2025 with 6,000 watts + New laser cutting head (investment approx. EUR 190,000 in 2025) Immediately available - inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Ijdpfxszh E Ugo Anrsba Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Max. format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with new cutting head Standard equipment: BySprint Fiber 4020 Pallet changer system with 2 pallets Closed enclosure/roof Scrap conveyor with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface cutting Cutting head Piercing Jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooler) Material specification Part tolerances and cut surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneously: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 watts Maximum sheet metal thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooler): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information is without guarantee - sale is made excluding any guarantees or warranties. Subject to prior sale.

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, total length: 10,520 mm, total width: 2,300 mm, total height: 3,990 mm, suspension: air, tire size: 385/65-22,5, color: green, Year of construction: 2026, Equipment: ABS, - EBS Brand new at PAVIC. Available immediately! PAVIC 3-axle 55m³ tipping trailer with lift axle Technical specifications: Coupling height: 1250 mm Length: approx. 10,522 mm Width: approx. 2,300 mm Height: approx. 2,380 mm Technical axle group load capacity: 27,000 kg Technical kingpin load capacity: 12,000 kg Unladen weight: 8,520 kg CHASSIS: Heavy-duty and extra-durable I-beam main frame; manufactured from high-strength MC700 steel, welded using an automatic robotic welding process. BODY: Capacity: 55 m³ Floor plate: HARDOX450, thickness 5 mm Side walls: HARDOX450, thickness 4 mm Front wall: HARDOX450, thickness 4 mm Rear door: HARDOX450, thickness 4 mm A resonator/vibrator is installed under the structure at the front to help loosen stuck bulk materials when tipped (see pictures). TIPPER BODY: Tipping body with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap), and more. HYDRAULIC CYLINDER (LIFT): Heavy-duty hydraulic cylinder (brand HYVA – C), single-circuit AXLES: 3 × 9-ton SAF CD (BI9–22S) axles with disc brakes (SBS2220) SUSPENSION: Air suspension. LIFT AXLE: Automatic lift axle on the 1st axle. TYRES: 6 × 385/65R22.5 (premium brand tires) WHEELS: 6 × steel rims BRAKE SYSTEM: WABCO braking system 2-line brake system according to EU regulations EBS 2S/2M Pneumatic parking brake 1 × yellow air coupling 1 × red air coupling 1 × brake pressure valve TPMS (tire pressure monitoring system) KINGPIN: 1 position, 2” (brand JOST or SAF) LANDING LEGS: Mechanical aluminum landing legs. Each leg is operated via its own locking device (after coupling). ELECTRICAL SYSTEM: Voltage: 24 V 2 × 7-pin and 1 × 15-pin ISO connectors EEC-compliant lighting as standard: SAE tail lights Side marker lights Brake warning lights Rear signal lights Lighting ASPÖCK (EUROPOINT III): 2 combination tail/brake lights (red) 2 combination indicator lights (orange) 1 license plate light ACCESSORIES: 6 × mudguards 2 × mud flaps 2 × reflective tapes and reflective plates, rear and side 1 × rear underrun protection 2 × wheel chocks with holders 1 × side aluminum protection 1 × toolbox 1 × working platform (painted and bolted) 1 × rollable tarpaulin (including mechanical support bar) Isdpfx Aoy N Tngjnroba PAINTWORK: Before painting, surfaces are smoothed and then cleaned. Then: sandblasting according to SA 2.5, followed by: 2 coats of primer 2 coats of acrylic topcoat RAL colors: Chassis (KTL): black Body: green (similar to RAL 6016 yellow green) For further inquiries, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. General information Year of manufacture: 2026 Axle configuration Tire size: 385/65-22.5 Brakes: disc brakes Suspension: air suspension...

Condition: not inspected (used), functionality: not functional, Rofin DC 025 industrial CO₂ slab laser resonator Manufacturer: Rofin Type: DC 025 Operating capacity: unknown Rated power: 2500 W Power range: approx. 250 – 2500 W Laser type: CO₂ slab (diffusion cooled) Excitation: radio frequency (RF) Operation: continuous (CW) + pulse mode Beam parameters Wavelength: 10.6 µm Beam diameter: < 25 mm Isdpfsy Dubdox Anroba Beam quality (K factor): > 0.8 Divergence: < 0.5 mrad Stability: ±2% (within 24 hours) Dimensions (L × W × H): approx. 1700 × 800 × 850 mm Weight: approx. 500 kg

Condition: used, For sale: resonator turbine removed from a Finn-Power L6A CO2 laser. Two units available. The turbines are in good condition, but it is recommended to replace the turbine bearings. Manufacturer: PRC Manufacturer code: 1111T2C115MC380VS Revision: REV14 Price per unit: 6000 EUR. If you have any further questions, please do not hesitate to ask. Ibedpfxsy Sz Tio Anroa

Year of construction: 2002, condition: good (used), functionality: fully functional, doubledeck screen box: 1.000 x 5.000 mm Ijdpfx Anelxzkksrjba squared meshes on both screen decks E-motor 4 kW steel-construction and outlet chutes

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. The resonator is in good used condition and operates flawlessly. Iodpeyt Dchofx Anrjba Two identical units are available (price is per unit).

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Ijdpsyrhi Nofx Anreba Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine was serviced annually (most recently in December 2025) – service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 with 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity normal steel: max. 12 mm Cutting capacity stainless steel: max. 10 mm Cutting capacity aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the output of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to the counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loader and unloader Filtration system Manuals Isdpfjzrnhwox Anroba

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% Ijdezu Nxiepfx Anreba - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Ibodpfsyxc Afsx Anroa

Condition: excellent (used), Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System Ibjdpfezrtyljx Anroa Manufacturer: Brüel & Kjær / LDS Dactron Type: LASER USB LAS 200 Machine Type: Shaker Control System / Vibration Testing Controller For sale is a used Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System, including a USB license dongle and documentation. The system was developed for controlling electrodynamic vibration testing systems and is suitable for vibration tests, resonance tests, random tests, shock tests, and endurance tests in research, development, and quality assurance. Technical Data: Model: LAS 200 Type: LASER USB Power Supply: 100–240 V AC Mains Frequency: 47–63 Hz Power Consumption: 1 A 8 analog input channels (BNC) 2 output channels (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency Stop connector Software Configuration: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Enabled Options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Calibration: Calibrated: 09/12/2023 Due date according to sticker: 09/11/2024 Dimensions: Controller (W × D × H): approx. 430 × 350 × 90 mm Weight: approx. 6–8 kg Equipment: USB license dongle Power cable Documentation as shown in the pictures USB interface 8 measuring inputs Digital I/O Master/Slave interfaces Shipping Data: Dimensions: approx. 430 × 350 × 90 mm Weight: approx. 6–8 kg Condition: Used Optical condition as shown in the pictures. Calibration sticker is present. Scope of Supply: Brüel & Kjær LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Note: The license keys visible on the documents have been obscured for data protection and security reasons. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION - Condition: Used. Functional scope as per the technical data below. Ibedpfoydq Hnsx Anrea - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: ready for operation (used), Year of construction: 2006, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 3, This 3-axis Bystronic Bysprint 3015 CO₂ laser cutting machine was manufactured in 2006. It features a working area of 3,000 × 1,500 mm and includes an automatic table changer and two cutting heads. The machine has a maximum cutting capacity of 12 mm for stainless steel and 20 mm for mild steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint 3015 machine we have for sale. Contact us for further details. • Working area: 3,000 × 1,500 mm • Cutting heads: 2 (5" and 7.5") • Features/Options: Cut Control; Adaptive mirror bypass; MCS; STL • Resonator: Included • Cutting-head cooling system: Included • Original turbine operating hours: Approx. 7,000 hours • Maximum cutting capacity: • Mild steel: Up to 20 mm (continuous operation) • Stainless steel: Up to 12 mm • Aluminium: Up to 6 mm Additional equipment • Automatic table changing system • Fume extraction system • Machine manuals Ibsdpfx Anozq Ap Tjrsa

Condition: good (used), Year of construction: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Isdovtm Szopfx Anreba Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667 Technical parameters:- Designation: KNC/H 1500/65- Maximum temperature: 650 °C- Recommended operating temperature range: 300°C – 600°C- External dimensions approx. (wxhxd): 2800x3200*x2100mm * height including structure for door when hydraulically opening- Internal dimensions (wxhxd): 1500 x 1000 x 1000 mm- Number of heating zones: 1- Maximum batch weight: 1000 kg- Melting power: 48 kW- Furnace weight: 1300 approx. kg- Voltage: 3/PEN 400/230V AC 50 Hz- The damper is part of the furnace, serves for automatic temperature control in the furnace and is controlled by the program from the controller. - includes technical documentation in Slovak - protocol of measurement and optimization of the temperature field to meet the DIN 17052-1 standard ΔT10°C in the internal working space (in an empty furnace at Tmax) \- Technical documentation is in SJ. Manufacturer: LAC, s.r.o., Czech Republic Year of Production: 2021 This is an electric furnace, the heating system of which consists of heating resistance elements located near the fan unit. Through the heating branches, the fan ensures circulation of the atmosphere in the heating space and thus heating of the working atmosphere and the charge in the furnace. The working chamber of the furnace is equipped with a separately regulated heating unit in the rear wall of the furnace. The furnace is equipped with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the working space of the furnace. The circulation fan drives the heated air through the circulation channels of the circulation insert. All rotating parts are located under a cover against accidental contact. The temperature profile of the device is controlled by a PID programmable INDUSTRY controller. This controller allows the creation of up to 30 heat treatment programs depending on the needs of the processing technology and the properties of the processed batch. Dimensions see. appendix.

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Ibedpfsy Rtf Usx Anroa

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h Iedpfxeztb Elj Anreba • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function Iodoyuchxopfx Anroba 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 3, This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a powerful 4.4 kW CO2 resonator and can accommodate a maximum sheet size of 3000 x 1500 mm. The machine includes 20 pallet positions for efficient operation. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 CO2 laser cutting machine we have for sale. Contact us for further details. Iodjzl D N Depfx Anroba • Resonator: 4.4 kW CO2 • Max. sheet size: 3000 x 1500 Additional equipment • ByCell • 20 pallet positions

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, fiber laser cutting machine power: 6000W, optional 12kW table size: 4000x2000mm pallet changer Siemens controller Siemens drives THK guides Precitec Procutter auto focus torch Max Photonics resonator chip conveyor CE warranty offered with: warranty CAD / CAM software Ibodpfx Ajvdq U Uonrea setup delivery (optional) training this is an exhibition machine and could be tested under power any time. please contact us

Condition: new, Year of construction: 2023, laser power: 8,000 W, Fiber laser machine HLF from stock, available for short notice. We have to test an identical machine under power. Power: 8kW Sheet format: 3000 x 1500mm Automatic changing table including ball rollers for scratch-free workpiece positioning Siemens touchscreen control with LAN/USB Siemens drives Precitec Auto Focus Procutter cutting head Sheet metal measurement IPG resonator with 8kW / alternatively MAX Photonics Small parts conveyor belt will include: guarantee CAD/CAM software Installation Delivery (within Germany) Donaldson suction Training offered Isdpfx Ajqgcwtjnreba The machine is a stock machine and is therefore available at short notice. We already have 300+ similar and identical machines under power in Germany and Europe. Reference visits to users are possible at any time. Give us a call !

Condition: new, Year of construction: 2023, New fiber lasers from the HLE series - Optimized equipment with an eye on the essentials - low acquisition costs despite high-quality components. Max Photonics resonator, Precitec cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Cutting head: PRECITEC LIGHT CUTTER - Auto focus Resonator 3KW (6KW/8KW/12KW optional) Automatic changing table including light barriers Suction DONALDSON - DFOE CE certified BECKHOFF control with touchscreen Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thickness at 3KW FE 15m VA 10mm Ibedpfxjqgcx Uo Anrea ALU 10mm CU 6mm Connection value max. 30kW Installation area approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 month guarantee CAD CAM software Libellula [CUT] 1 license Installation Delivery within Germany and Software/operator training offered Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials to test. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 15 years, of which we have been selling their fiber lasers for around 8 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. An identical HLE1530 3kW can be tested with us at any time. Call us and visit us!