Used Ribbed Dressing Plate for sale (15,176)

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface. Fgedpfstqfhxjx Ah Uji

Condition: used, Sieve & Dressing Station System Fedpfx Ajxq Dfieh Ujgi

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm Fjdpfxewc D Dxe Ah Usgi side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark

Condition: used, Year of construction: 1996, total length: 3,500 mm, total width: 1,500 mm, total height: 1,400 mm, Empty weight: 3.000 kg - Year: 1996 - Documentation available: Yes - Max. sheet thickness: 5mm - Top roll diameter: 150mm - Max. working width: 1000mm - Drive: raulisch Fodpfx Ajw Abn Ijh Uogi - Number of rolls: 4 - Bottom roll diameter: 150mm - Transport dimensions: 3500mm x 1500mm x 1400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Fodpfx Ahjf Srmze Uogi Temperature max. 110 C From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: used, sheet width 2000 mm plate thickness 3 mm Fodsxfwdzepfx Ah Usgi rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Fodpewiipmjfx Ah Usgi Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm Fgsdpexryziofx Ah Uji -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Condition: used, Year of construction: 1994, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 3.0 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 5.0 - 750 mm oil volume 120 ltr. engine output 7.5 kW weight 6400 kg. range L-W-H 4045 x 1783 x 1750 mm Good condition (!!) According to the previous seller, with very few operating hours From a maintenance workshop Equipment: - Robust electro-hydraulic sheet metal shear * Design: Guide rail - LVD control panel centrally located on the front of the machine - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment * Adjustment from the front - via handwheel * Including analog value display - Electro-motor-driven backgauge with recirculating ball screws * Continuously variable adjustment range * Analog position display * Rapid traverse possible - Ball transfer units + recessed grips in the support table - Front finger guard - 1x freely movable foot switch - 2x emergency stop buttons at the front - Original operating instructions * Special accessories included: - LVD movable sheet support device for thin sheet metal blanks - 1x LVD extra-long side stop (3.000 mm) with Support leg - 1x LVD used set of replacement blades Fodpjxaap Njfx Ah Uegi

Condition: used, Plate roller Sheet metal roller Model: Electric Manufacturer: Gosmeta Type: PW.2050 Max. Sheet-width: 2000mm Fodpfxswnhdye Ah Usgi Max. Sheet-thickness: 5mm Rolls-diameters: 150mm Machine-dimensions: 2800x1050x1200mm - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° Fgjdpopfaxuefx Ah Uei POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Type: VS 255 4 Fsdpfx Ajxrf Hweh Uegi Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Weight 800 kg Fjdsvz Eukopfx Ah Uegi Total power requirement 3 kw

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm Fgedpfxexrywqo Ah Uoi -Width: 1000 mm -Height: 285 mm -Plate thickness: 35 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: ready for operation (used), length 6000 mm width 2500 mm Fsdjud Il Sjpfx Ah Uogi total power requirement / kW Without PC and software Dimensions (L×W): 6000 × 2500 mm, without vacuum plate Manufactured according to DIN 876 / class II

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - Serial number: 1011268 - Max. sheet thickness: 6mm - Top roll diameter: 220mm - Max. working width: 3040mm - Drive: raulisch - Number of rolls: 4 - Bottom roll diameter: 220mm - Motor power: 5.5kW - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information Fjdpfew Elvhox Ah Uogi VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW Fgjdpfx Ahjxrgv Ts Uei weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used hydraulic guillotine shear by Safan Fgsdpfx Ajxrf Emjh Uoi Model: VS 205 6 Capacity: 2050 x 6 mm Electric NC back gauge Rear safety guard

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Weight 665 kg Fedpfxsvz Eudo Ah Ujgi Total power requirement 3 kw

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with adjustable feet -Length: 2000 mm -Width: 1000 mm Fsdpfoxryv Hsx Ah Uegi -Height: 285 mm -Sheet thickness: 30 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Fgsdpfx Ahjxrtxus Usi Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: used, Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Fedpfx Aeww Iygsh Uegi Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Faceplate Make Röhm (28480) Diameter 500 mm height 105 mm Jaw height 80 mm Fgsdstq Akljpfx Ah Usi Short cone size 8 Cone diameter 139.7 mm 4 stud bolts M 16 Pitch circle diameter 171.4 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Fodpfjvz Eg Hox Ah Uogi Weight 900 kg Total power requirement 3 kw

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer Fjdpjd Ehfmofx Ah Uogi -Quantity: a 2nd plate is still available ID21154 -Clamping plate with: a carriage with clamping device -Car dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm -Plate thickness: 35 mm -Plate height: 300 mm -Plate with: support ribs -Groove width: 52 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg