Used Rip Saw for sale (19,344)

Condition: new, Circular working area 360 mm Quadrant working area 360 x 360 mm Bundle working area W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Iaodpfxowhli Ho Ahyol Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Saw blade tensioning: hydraulic Multiple feed 500 mm Drive power 3.7 kW Machine size L x W 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by an IE3 motor with inverter (PMSM, Euate IE4) - User-friendly PC control with touchscreen - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vise - Two-part front vise - Continuously variable speed control via inverter - Hydraulic blade tensioning - Roller bearing with hydraulically controlled carbide blade guide system - Automatic working height control via quick start sensor - Preset cut counter with shutdown - Nesting device for bundle cutting (downholder) - Power-driven blade cleaning brush - Saw blade monitoring for standstill and blade breakage - Flushing hose for machine cleaning - Work light - 2 m long roller table - One M42 bi-metal saw blade - One set of tools and one Toolbox - Full Cover

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range B:1000 x H 220 mm Iodoxnc U Repfx Ahysal cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Condition: good (used), Year of construction: 1970, not tiltable, carriage length 2600 mm 1250 mm to the right of the blade 380 V, 5.5 HP upper extraction Iedpex U A Erefx Ahyeal

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kasto KASTOwin A 3.3 Fully Automatic Metal Bandsaw (2017) Manufacturer: Kasto Ijdpfxoyab Uue Ahyjal Model: KASTOwin A 3.3 Metal Bandsaw Year of manufacture: 2017 Condition: used, under power Further information available upon request. Cutting range: 330 mm Cutting area [H x W]: 330 x 350 mm Multiple feed: 9,999 mm Saw band dimensions: 5,090 x 34 x 1.1 mm Cutting speed, stepless: 12 – 150 m/min Saw motor, frequency controlled: 4.0 kW Material support height: 700 mm Length: 1,350 mm Width: 2,380 mm Height: 1,850 mm Weight: 2,200 kg

Condition: used, Year of construction: 2002, miter ja weight of the machine ca. 370 kg 3 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Iajdpfx Aefmm Dzjhyol Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1993, TRENNJÄGER metal circular saw with mitre function Includes longitudinal stop! Saw blade diameter: 400 mm Cutting length: 400 mm Isdex U Dl Tjpfx Ahyeal Cutting diameter: 130 mm Year of manufacture: 1993 380 V Power: 4.5 kW

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Iedpfx Ahsxt Uvqjyoal

Condition: used, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Weight 1800 kg Iedpfx Aswt Ua Ejhyoal Arbeits- und Platzersparnis, sicherer binierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.

Condition: reconditioned (used), > Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade. > 4 hold-down devices, new wheels and new bearings. > Machine completely overhauled and new painted. Iaedpfx Aofua Drjhyel > Passage width of 600mm > Further details on request.

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 Iaodpfxeh Dwmls Ahyjl - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung Iaedpfx Aolug Tujhyel weight of the machine ca. 1 t number 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard Iajdpfxsx U Tyms Ahyol - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Iaedpsxnlgcjfx Ahyel

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Iaedsv A Hgdjpfx Ahyol Total power requirement 3 kw

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Iaedjyad A Uopfx Ahysl Cutting speed:automatic control Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: used, cutting height (max.): 105 mm, cutting width (max.): 1,550 mm, cutting length (max.): 2,500 mm, total length: 430 mm, saw blade diameter: 350 mm, cutting height with scoring (max.): 105 mm, – Polish production – DTR technical documentation – Electric saw blade spacing adjustment – Pneumatic clamps – With scorer unit TECHNICAL PARAMETERS: – Max. blade diameter: 350 mm – Spindle diameter: 30 mm – Height-adjustable blade (up/down) – Blade guard – Max. cutting height: 105 mm – Min. cutting width: 250 mm – Max. cutting width: 1550 mm – Max. cutting length: 2500 mm – Electric saw blade spacing adjustment – With scorer unit – Max. scorer blade diameter: 125 mm – Scorer spindle diameter: 20 mm Iodpoyaazyofx Ahyeal – Main motor power: 2 x 4 kW – Scorer motor power: 2 x 0.75 kW – Carriage feed motor power: 0.37 kW – Pneumatic clamps: 2 pcs – Extraction port diameter: 2 x 120 mm – Machine transport dimensions (L/W/H): 430 / 140 / 110 cm – Weight: ~1000 kg

Condition: used, Year of construction: 2001, volt 400 V weight Stück 490 kg 2 miter ja 175 mm Rund Iaodpou T Sfbefx Ahyol

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm - min saw spacing: 180mm - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW - feed motor power: 0.74kW - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm Iedpfx Ahox U Tvhjyoal - weight: 250kg ADVANTAGES – Made in Poland – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: KK00034979, table length: 3,100 mm, total length: 4,000 mm, total width: 4,000 mm, total height: 1,700 mm, overall weight: 850 kg, table width: 360 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,000 rpm, input voltage: 400 V, input frequency: 50 Hz, SCM NOVA SI 40 Panel Saw - incl. digital measuring system up to 2000 mm, as well as extraction unit, Manufacturer: SCM, Model: ECO 300 D, Year: 2023, Serial Number: SCM0005771 Note: The saw can be transported on a standard truck. Note: The item can be collected from 16.02.2026 onwards on a mutually agreed date. Iedpfxox Uy Ans Ahysal FCA D-73235 Weilheim Teck – loaded onto truck

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Total power requirement 7,5 kw Iasdpfx Ahov A E Ndsyol - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: used, Year of construction: 1999, cutting diameter max 400 mm Iaedew Sygmspfx Ahyjl mit Sägeblättern weight of the machine ca. 1,4 t

Condition: excellent (used), Catalogue number 7864 TECHNICAL DATA - Track width: 300 mm - Shaft working width: 310 mm - Max. disc diameter (currently fitted 300 mm): 350 mm - Bore diameter: 70 mm - Maximum cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm - From above: - Kickback pawls - Metal sliding roller - Kickback pawls - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - From below: - Guide rail - Kickback pawls - Track - Central track lubrication - Stepless feed speed adjustment Iasdpfx Ahex U Tqxeysl - Feed motor 1.1 kW - Main motor 26 kW - Extraction nozzle diameter 200 mm - Overall dimensions (L/W/H): 1800x1350x1450 mm - Weight approx. 1700 kg ADVANTAGES – Italian made – Very good condition – Used multi-blade saw Net price: 37,900 PLN Net price: 9,000 EUR depending on the rate of 4.2 EUR (Prices may change due to market fluctuations)

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, total height: 1,800 mm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), input frequency: 50 Hz, input current: 18 A, EMMEGI TWIN ELECTRA SUN TU/6 double mitre saw Isdpfxex Uyvzo Ahyeal Note: The item can be collected from 16.02.2026 on a date to be arranged. FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm Isdpfxox U Tp Ij Ahyjal - Table width with extension: 750mm - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: M275930, cutting length (max.): 6,000 mm, total length: 9,000 mm, total width: 2,000 mm, total height: 2,000 mm, input voltage: 400 V, rotational speed (max.): 2,820 rpm, overall weight: 3,500 kg, power: 7.7 kW (10.47 HP), input frequency: 50 Hz, input current: 19 A, EMMEGI COMBI 5 AXIS STAR TU/6 Double Mitre Saw Attention: The item can be collected from 16.02.2026 onwards, with the specific pickup date to be agreed upon. FCA D-73529 Schwäbisch Gmünd – loaded onto truck Iajdpfex Uyr Nsx Ahyel