Used Riveting for sale (95)

Condition: used, Selling various small machines from old stocks. The following machines are available: Welding machines grooving machines Dcjdporn Syxefx Ak Asp riveting machines Punching machines pumps The pictures are only a small excerpt

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: black, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list Dcodpj Aa Hqdofx Ak Aep WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST

Condition: new, maximum load weight: 36,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Dcodpfsz N Nxdjx Ak Aop Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction with continuous crossmembers * Frame extended forward * Coupling plate approx. 8 mm thick, with a 2-inch fifth-wheel kingpin according to DIN 74080 / ISO 337 Axle * Axle lift mechanism on axle 1, with fully automatic, load-dependent axle lift control * Starting assist: Activated via 3x brake application, 30% overload up to a speed of 25 km/h * Operation on the chassis via switches * Also possible from the cab (switch in the cab required - PIN 12) * Manufacturer to be chosen: Kögel * Three-axle unit, with disc brakes Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm travel Vehicle tires * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J) Chassis components * Fifth-wheel mounting (manufacturer to be chosen by Kögel) mechanically with leveling foot, 24 t lifting capacity. * One-sided operation on the driving side (right side). * Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5 * Consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles and 1 pair of quarter-circle fenders with mud flaps behind the axles. * Lateral protection device according to ECE-R73. * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 525 x 390 x 410 mm. Installation at the rear, 1x on the left and 1x on the right. * High, rigid rear underrun protection made of steel according to ECE-R58 * 1 pair of retractable warning signs (approx. 280x280mm) for over-width loads, retroreflectively red / white, with LED lighting, spiral cable and plug connection. Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638, (without connection lines) * Parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection. * WABCO EBS system * Air suspension system incl. 1 lifting and lowering valve, mounted on the driving side behind the axle unit * Driving position is automatically adjusted. * 2 non-interchangeable coupling heads at the front * Air tank for braking system and air reservoir made of steel (EN 286-2) Floor * Plate floor approx. 30 mm thick * Floor sealed around the perimeter, pocket rails for square tube inserts approx. 80 x 80, arrangement according to drawing * 8 pieces of pocket rail strips (18 pocket rails per strip: 4 pieces each on the outside + 10 pieces in the middle) Front Wall * Storage for max. 20 square tube inserts 80 x 80 (length 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front end according to EN 12640. * Side wall VarioFix steel hole outer frame without rail storage * 21 pairs of lashing eyes in the outer frame (according to EN 12640), permissible pulling force approx. 5,000 kg per ring. Impact Protection * 1 pair of steel impact buffers approx. 160x85x85mm mounted on the frame end plate

Condition: new, mileage: 100 km, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST Dsdpfx Aoz Sipisk Ascp

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Dedoza Aiyopfx Ak Aecp Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013965, empty load weight: 7,180 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Please note: the images shown are archive photos for illustration only! 2 units available #Chassis / Tractor Semi-Trailer Additional splash guard panel riveted to the underside of the floor, in the neck area above the tractor unit's rear axle and above the wheels; reinforced frame for loads extending to the outer frame, outer frame fitted with "Load-Lock" profile at approx. 400 mm intervals 10 pairs of mushroom-head lashing points recessed into the top/outer edge of the outer frame, 10 t each 24 t twin-speed landing legs, single-side operation, with semi-round foot and straight base plate, with thrust compensation Telescopic rear support legs Hook rail for leaning-type loading ramps across the full width of the rear pull-out Mechanical rear pull-out with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm, incl. extendable rear underrun protection with lighting Dcjdpfx Aezu Aqxek Ajp Storage compartment for loading ramps integrated in the rear pull-out, usable only when the rear pull-out is extended by approx. 1,000 mm 1 pair of ramps, 3,000 mm long, 300 mm wide, load capacity 6,000 kg per pair Electric winch, 24 Volt, pulling force approx. 8,165 kg, mounted centrally at the front, operated by wireless remote control #Axles & Suspension Axles/chassis laser-aligned – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operable from the towing vehicle, incl. forced lowering and traction assist SAF or BPW drum brake axles, manufacturer's choice #Wheels & Tyres 235/75 R 17.5" make at manufacturer's discretion Steel wheels in twin arrangement, factory silver #Electrics 24 Volt, LED multi-chamber lamps, yellow LED side marker lights, LED number plate light 2 white LED front position lamps 2 white/red LED rear outline marker lamps on flexible mounting arms 2x 7-pin and 1x 15-pin fool-proof connector sockets at the front, without connecting cable 2 additional LED work lamps at the rear 1 beacon light with bracket 2 pairs of warning panels, dual LED-illuminated and extendable to 3,000 mm, removable via plug connector Additional 7-pin socket (to ISO 1724) in the rear underrun protection LED work lamps on the sides, 1x each on the left and right #Floor Chequered aluminium floor (Lohrblech type) of welded construction; rear pull-out walkway area fitted with chequer plate, centre section in steel chequer plate #Country of Registration / Plates Germany With DEKRA inspection and certification (pursuant to §13 EC-FGV) 24/7 service hotline Prepared for single-row number plate holder Contour marking with reflective tape to ECE R048, yellow on the sides and yellow at the rear Warning panel to ECE-70 Combination type approval report for applying for a §70 permit for a towing vehicle, on collection from the Triptis plant (please note the maximum permissible gross train weight in the tractor's registration documents; apply for an uprating beforehand if required – this is at the manufacturer's discretion and is not guaranteed; any resulting costs will be invoiced separately) 1 to 3 "Angles Morts" blind-spot stickers (as required by regulation and technical feasibility) #Paintwork Frame hot-dip galvanised incl. passivation 15-year warranty against corrosion perforation Support/landing legs feet black coated 2 units available

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 350 mm, roller diameter: 90 mm, Key advantages: clinching technology without rivets – no additional fasteners required, low operating costs, fast and repeatable joining process, intuitive HMI touch screen, compact and robust design, power supply 230 V / 50 Hz, operating pressure 6 bar, easy to use and maintain, perfect for serial and workshop production. Application: ventilation and HVAC, metal enclosures, home appliances, automotive, control cabinets, sheet metal components manufacturing. Dcsdpjy Rrcrefx Ak Aep Shaft diameter: 90mm, Throat depth: 350mm, Sheet thickness range (mild steel): 2x 0.5-1.2mm, Press force: 76KN, Power supply: 230V Air pressure: 6 BAR Weight: 500kg

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Dcjdpfx Asnt T Auok Aep Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm Dsdpfx Asnt T Afek Ajcp workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Year of construction: 1999, condition: used, hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control Dsdpfxjdlw Dtj Ak Ajcp -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 3000 is an automated portal nailing machine for the efficient production of pallets and boxes. With up to twelve nailing units, two work areas, and four clamping stations, it offers high throughput with reduced setup time. The nailing units, which are controlled in groups, are manually adjusted to the pallets to be produced and automatically moved via the central portal. A 7-inch touch display, extensive safety features, and options such as central height adjustment, robotic stacking, or remote maintenance make the StoNail 3000 a reliable solution for companies that want to efficiently produce pallets with regular nailing patterns. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Box walls & wooden packaging Nailing table with nail bridge: Robust frame construction with a 70° inclination angle for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 6000 x 1700 mm or 2 pallets: max. 2500 x 1700 mm Option: Extension or shortening of the machine frame by 2000 mm or according to customer requirements Dcodpjralk Rjfx Ak Aop Modular pallet stop system for inserting the loose wood and blocks: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, crossbars, and top boards Rivet plates can be used at all positions Stringer prefabrication Option: Equipment with laminated wood panels for custom templates Frequency-controlled nail bridge for positioning the nailing units Equipped with 8 nailing units incl. feed cylinder, nailing unit holder, release, and nailing shoes for limiting the insertion depth Manual quick adjustment of the nailing units depending on the pallet format Collision monitoring: The movement of the feed cylinder is constantly monitored Start button located directly on the nail bridge Nailing units: Uniform nailing unit holder for large and small nail guns Maximum nail length: 90 mm (longer nails available upon request) Option: Equipment of the nail guns with Maxi-Coil magazines for up to 1000 nails Programming: Simple, intuitive programming. The machine takes over part of the programming and performs a learning cycle before the first program start to automatically detect the nail positions. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German, English, Czech, and Taiwanese Safety equipment: Emergency stop button on the machine and on the control panel Start emergency stop on the nail bridge Spring-return emergency stop on the nail bridge Option: Safety foot mats for person detection Key features and options can be found on our website.

Year of construction: 2006, condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece Dodpfxofw Rwms Ak Ajcp -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Year of construction: 2026, condition: new, functionality: fully functional, New dual-sensor conveyor metal detector. Detects ferrous and non-ferrous metals (stainless steel, aluminium, copper, brass) on 1000 mm conveyor belts before they reach crushers, mills, granulators or shredders. Dedpfx Ajzmnwnjk Ajcp - Upper and lower sensor, separable design for easy installation on existing conveyors - Adjustable sensitivity and interference settings - LCD control unit, dry-contact relay outputs for conveyor stop, alarm or diverter - PLC integration, optional rivet sensor, beacon and siren - Mechanical design adapted to the conveyor on site Made in Türkiye. Delivery FCA Ankara.

Condition: new, functionality: fully functional, Year of construction: 2026, Suzhou JONO Environmental Technology Co., LTD. is a Chinese national high-tech company, which is founded in 2013 and located in Suzhou, China. Since our establishment, we have been devoting to the business of solid waste treatment, becoming the industry leader in China. Still, we keep investing on R&D and advanced intelligent technology. We are committed to providing automated, digital high-end equipment and complete solutions for our clients in solid waste treatment, public sanitation and mining industry. Our business covers more than 70 cities worldwide. /// ADVANTAGES & HIGHLIGHTS A steel rail type buffer frame is installed at the inlet to reduce the impact and abrasion of the material on the belt and to improve the efficiency of belt conveying. Convenient Transportation The two-section split structure can be folded to reduce the height to meet transportation size requirements. Screen Structure The screen structure is made of high-strength steel plate with ring groove rivet connection for stable and reliable operation. Three layers of screen mesh can screen four different specifications of finished products and the mesh hole can be customized according to requirements. Safe and Reliable The motor is equipped with a protective shield to avoid accidental injury caused by improper operation. The frame is made of high quality low-alloy high-strength material steel to improve the strength of the frame. Computer Aid System is used to optimize the structure of the frame to eliminate bending and even cracking stress concentration sources.100% of the important welds are ultrasonically inspected to ensure safety. Easy Maintenance For maintenance or repair, the screen body can be placed in a horizontal position by means of a hydraulic cylinder and the belt feeder at the top of the vibrating screen can be lifted, thus vacating enough space for maintenance operation. Transport Size (L*W*H) (mm): 16.000 x 3.500 x 3.800 mm /// TECHNICAL PARAMETERS Screening System No. of Decks: 3 Screen Size(L*W) (mm): 1.800 x 6.000 mm Screen Size(L*W) (mm): 9.5 x 2 mm Main Conveyor Conveyor(L*W) (mm): 10.500 x 1.000 mm Oversized Material Conveyor Conveyor(L*W) (mm): 7.500 x 500 mm Dodpjy Slcbefx Ak Aocp Conveyor (Right) Conveyor(L*W) (mm): 7.500 x 500 mm Conveyor(Left) Conveyor(L*W) (mm): 7.500 x 500 mm Undersized Material Conveyor Conveyor(L*W) (mm): 6.800 x 1.000 mm Whole Machine Weight (T): 32 tons Transport Size (L*W) (mm): 16.000 x 3.500 x 3.800 mm Total Working Power (kW): 46 kW Motor Power (kW): 93 kW

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage. Reinforced frame for vehicle loading Outer frame with load-lock profile approx. every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area 24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate 2 wheel chocks with holder Aluminum side impact protection Galvanized steel underride protection Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly Semi-elliptical fenders with anti-spray flaps according to EC Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included) Attention! Damage to the platform floor is possible due to the cross supports! Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted) Covered with platform in the wheel arch area, with steel diamond plate in the center. Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position! Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles 1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension) Dedpfjlf Dtmsx Ak Aocp Rear slope to approx. 500 mm Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers Axles + Suspension Drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h) with central lift arm Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system 2-line pneumatic braking system Color-coded lines for easy service. Spring parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Wheels and tires 235/75 17.5, manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 additional LED work lights at the rear, switched via the revers

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. Dedsu Nfrcspfx Ak Ajcp *

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Dcodpfocnxa Ssx Ak Aep Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 5000 is a powerful portal nailing machine for the automated production of pallets and crates. With up to eight nailing heads, two work areas, and a 750 mm stroke on the Y-axis, it offers a high production capacity for a wide variety of nailing patterns. The system features a 12-inch touch display, height adjustment, and individual control of the nailing heads. Downtimes are significantly reduced by the optional offline programming, as programs can be created and simulated outside of production. The automatic path optimization also ensures short travel distances and increases the cycle output while reducing resource consumption. General advantages: Modularity: Adjustable machine length and configuration to meet specific production requirements. Flexibility: Suitable for small pallets (two stations simultaneously) and large pallets (full work area). Automation: The machine optimizes the work process through automatic calculation of the most efficient and fastest nailing path. Nailing table with nailing bridge: Construction: Robust frame with a 65° inclination angle for ergonomic operation. Machine length: approx. 8500 mm (extendable/shortenable by 2000 mm or as per customer request). Work area: 1 pallet: max. 6000 x 1700 mm 2 pallets: max. 2500 x 1700 mm per pallet Stop system: Dodpjztanxjfx Ak Aocp Parallel adjustable double C-rails Manually adjustable stops for bottom rails, cross rails, and top boards Rivet plates can be used at all positions Pre-fabrication of the skids Optional special equipment with laminated veneer lumber for custom templates Optional aluminum clamping system Nailing bridge: Frequency-controlled for positioning the nailing heads Equipped with 6 nailing head units including feed cylinder, nailing head holder, release and nailing head shoes for limiting the insertion depth Manual nailing head quick adjustment for different pallet formats Safety features such as collision monitoring (the movement of the feed cylinder is constantly monitored) Start button directly on the nailing bridge Nailing heads: Type: depending on customer requirements (Bea, Bostitch, Max, Fasco,…) Nail capacity: Up to 90 mm nail length (longer nails available upon request) Option: Maxi-Coil magazines for up to 1000 nails Programming and control: Easy operation: Intuitive programming incl. visualization of the product to be nailed (pallets and crates) Control: Siemens PLC with touch panel Functions: Pallet programming directly on the control panel Pallet and nail counters, the machine stops as soon as the nails are used up Storage of created pallet programs Remote maintenance via internet connection Multilingual operation (German, English, Czech, Polish) Safety equipment: Emergency stop button on the machine and on the control panel Emergency stop at the start on the nailing bridge Option: non-contact safety laser scanner on the nailing bridge

Condition: good (used), Pneumatic rivet gun, rivet nut pliers, blind rivet nut clamp, pneumatic riveting tool, blind rivet gun, blind rivet Dcedpfxsgzhxto Ak Aep -Compressed air rivet gun -Application range: 2.0 to 4.0 mm -Dimensions: 275/80/H220 mm -Weight: 1.3 kg

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Dedpfx Aod I E Irjk Ascp Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. -Sanitary Industry; fittings and armature Processes: -Spray wash -Spray rinsing -Drying All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.