Used Robland Z 3200 for sale (52)

Condition: used, Robland NZ3200 panel saw with sliding table Scoring saw with a separate motor, Table length: 320cm Main motor: 5.5KW Gsdsy Tk Swspfx Akyoiu 3 blade speed settings Tilt: 0-45 degrees, electrically adjustable Upper and lower blade adjustment, electrically controlled Fence on the right side, manually adjustable up to 1510mm High-quality machine that fully performs its functions.

Condition: excellent (used), works and looks impeccable, very well maintained without signs of wear on the table, electric lifting and tilting to 0-45, 5.5 kw motor + pre-cutter, year of manufacture 2009 Gisdpfx Akex Dx I Ssyju

Condition: as good as new (ex-display), Year of construction: 2026, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Godpjgfm Efofx Akysiu Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Giedpfx Asiv Hdvokyeu Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Gijdpfx Akehpl Uneyou Weight: 1000kg

Year of construction: 2022, condition: as good as new (ex-display), Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Giedpfx Aeid Ig Ajkysu Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut ruler display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Gsdpfx Aexu Dg Uekyeiu Motor power: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Condition: ready for operation (used), In very good condition. Gjdpfx Akeyy Sqbjyeiu

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 3000 mm Cutting depth: 125 mm Scoring cutter: yes Sawblade height and tilt adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: scale Width stop indicator: scale Crosscut ruler indicator: scale Giedpfx Akewhuuxoyou Sawblade diameter: 400 mm Speed: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Mill arbor pivoting: yes 0 - 45° Mill arbor height and tilt adjustment: handwheel Mill arbor height and tilt indicator: scale Mill arbor: 30 mm Mill arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. tool diameter: 180 mm Motor power / milling cutter: 4.4 kW Extraction connection: 100 mm, 100 mm, 80 mm Machine length: 2500 mm Machine width: 1500 mm Weight: 800 kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Godpfx Aetpivkekysiu Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Width stop display: Scala Cutting ruler display: Scala Saw blade diameter: 300mm Speeds: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Milling arbor height and tilt adjustment: handwheel Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: new, Year of construction: 2022, Cutting length: 2500 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 2550 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Giodjid Igqepfx Akyju Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Condition: new, Year of construction: 2025, Cutting height at 90°: 125 mm Cutting height at 45°: 80mm Cutting length at 20mm cutting height: 545 mm Gsdpfx Aksgzlprsysiu Cutting length at 125mm cutting height: 450mm Miter range horizontal: 0 - 45° Miter range vertical: -45° to +45° Roller conveyor / support table: no Saw blade diameter: 400 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 60mm Table size: 1540mm x 1025mm Machine length: Machine width: Weight: 180kg

Condition: new, Year of construction: 2025, Roller diameter: 600 mm Throat depth: 580 mm Cutting depth: 370 mm Tilting table: yes, -0 to +20° Table size: 810 x 580 mm Band speed: 1660 m/min Motor power: 2.2 kW / 400V Motor brake: yes, automatic Extraction connection: 2 x 120 mm Machine length: 1190 mm Giedpfex Edlfox Akyeu Machine width: 800 mm Machine height: 2063 mm Weight: 295 kg

Condition: new, Year of construction: 2024, axis 920 mm x-axis 3000 mm material thickness Z 12 mm - 30 mm feed speed 20 m/min. A - axis 360 degrees Minimum dimension: plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm Gsdecnz H Hepfx Akysiu The saw blade runs in X - direction Max. depth Depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required suction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available - Gijdofmdcqjpfx Akysu

Year of construction: 2022, condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm diameter planer shaft: 70 mm Tersa knife shaft Gsdsdkl Sqjpfx Akyoiu rpm: 5500 dimensions planing fence: 1300 x 150 mm inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Machine is in our showroom and immediately available.

Condition: used, Year of construction: 2008, Colour: Grey Thicknesser Robland D510 Serial no. Year of construction 2008 Giedpfewnh Tbex Akyeu Table dimensions 510x850mm Max. working width 510mm Min-max working height 250mm Max planing depth 8mm 4 knives Tersa 4 throughput speeds 5/8/10/16 m/min Electrical high/low 380V, 5.5kW, 6000 Rpm Dimensions: 1200*880*1100mm, weight 480kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Max. planing width [mm]: 530 - Max. planing height [mm]: 300 - Max. planing depth [mm]: 530 - Planing shaft speed [rpm]: 5000 - Worktable length [mm]: 880 - Planer block diameter [mm]: 110 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Extraction nozzle diameter [mm]: 150 - Max. feed speed [m/min]: 19.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2022, condition: new, Angle: 0° - 90° Maximum cutting length: 1370 mm Gijdpji Ezr Nofx Akyju

Condition: excellent (used), Robland x310 multi-function machine: saw, planer, router – 5-in-1 Planer: width 31cm, max. height approx. 200mm, 3 knives, 1 feed speed, Jointer: width 31cm, table length approx. 140cm, 3 knives, adjustable fence, Router: spindle diameter 30mm, 1 speed, side table, adjustable fence, Gsdsy S Txwjpfx Akysiu Saw: adjustable up-down and 0-45 degrees, side table, fence on the side table, Horizontal drill press: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each with 2.2KW, power supply 220V, used machine in very good condition, ready to work, sturdy multi-function machine.

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations Giedsx Igzqopfx Akyou - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: new, Year of construction: 2026, For sale is a high-quality Robland multi-combination machine. This unit integrates several woodworking functions in a compact and extremely robust design—ideal for workshops, joineries, or ambitious woodworkers. General Data: + Weight: 560 kg + Motor power: 3 kW (4 HP) Godpfoy Nyquox Akyoiu Circular Saw: + Saw blade diameter: 250 mm + Speed: 4500 rpm + Max. cutting height: 85 mm + Swivel range: 90° – 45° + Sliding table: 1450 mm + Rip fence cutting width: 655 mm + Extraction ports: 100 mm + 60 mm Spindle Moulder: + Spindle diameter: 30 / 32 / 50 mm / 1¼" + Spindle speeds: 3000 – 6000 rpm + Max. tool diameter: 180 mm + Max. tool height: 120 mm + Travel: 140 mm + Tilting up to 90° + Optional tenoning hood up to 250 mm + Extraction port: 100 mm Planer & Thicknesser: + Cutter block diameter: 70 mm + Cutter block speed: 5500 rpm + Working width: 310 mm + Planer table: 1320 x 310 mm + Thicknessing height: up to 230 mm + Number of knives: 3 + Tersa cutter block + Planer knives: 310 x 25 x 3 mm + Feed speed: 6 m/min + Extraction port: 100 mm + Mortising unit (optional) + Drill chuck: 0 – 16 mm + Travel: 165 x 140 mm + Drilling depth: 85 mm Location: 39340 Haldensleben Price: €5,750 net

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, documentation/manual, saw blade guard, Robland sliding table panel saw model E3100 Gjdpfxsy R D Sle Akysiu Machine in excellent condition, fully functional and ready for use. Ideal for precise and professional processing of panels and solid wood. ✔ Checked and tested in all its functions ✔ Maintenance performed on mechanical and electrical components ✔ Precise and smooth sliding carriage The machine has been serviced by a company specialized in maintenance and technical support. Contact us for more information or to arrange a demonstration.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Weight 900 kg Gijdpfx Akov A Hhuoysu Total power requirement 7,5 kw

Year of construction: 1990, condition: ready for operation (used), overall weight: 5,000 kg, total width: 1,500 mm, total height: 2,000 mm, product length (max.): 3,000 mm, spindle speed (max.): 20,000 rpm, This wood mill was manufactured in 1990. Consider the opportunity to buy this ROBLAND Tischfräse wood mill. Contact us for further details. Gisdpfoyi A Tkox Akyou

Condition: as good as new (ex-display), Year of construction: 2025, Spindle tilting: Yes, 0 to 45° Height adjustment: Electric / Position control Swivel adjustment: Electric / Position control Milling stop adjustment: Electric / Position control Milling jaw adjustment: Manual / Handwheel Height display: Digital display Swivel angle display: Digital display Milling stop display: Mechanical counter Aigner integral stop: Yes Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Gjdpowhuvcsfx Akyjiu Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg