Used Robot Cell for sale (7,262)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Fsdpsr Aka Asfx Agrepb Lifting capacity: 20kg Reach: 1726mm

Condition: used, Year of construction: 2011, input voltage: 400 V, input current: 32 A, type of input current: three-phase, Equipment: documentation/manual, We are offering this used robotic welding cell with 2 manual turntables, year of manufacture 2011. 1x KUKA welding robot KR 16L6 with two HDP200 manual turntables. The system is installed but no longer in use. Sale from site as seen. Type: RWS 1100 / 2×HDW Serial number: 09.09.594.000.000 Year of manufacture: 03/2011 Power rating: 36.8 kVA Fpsdpfx Agox Tab Ijrob Nominal voltage: 3×400 V Nominal current: 32 A Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: F/18/0003334/A/001, Milling robot cell, year of manufacture 2018, essentially consists of: Robot system including console for mounting the robot (upright); Clamping and exchange system, with one fixture inside the enclosed robot cell, the other outside the danger zone, for loading and unloading; Milling spindle including control unit; Safety enclosure and protective equipment; Control cabinet and controller; Vacuum clamping system. The cell can be inspected in operation until the end of January 2026, after which it will be dismantled and will no longer be in operation! Fpjdpfxsx Swiaj Agreb

Condition: used, Year of construction: 2017, Robot cell ABB robot with Clean Laser Manufacturer: ABB / Clean Laser Model: IRB4600 Year of manufacture: 2017 System consists of: ABB robot IRB4600 Control cabinet Handheld operator panel Fjdpfowrcn Usx Agropb Laser cleaning device Clean Laser type intelliScan30 Extraction unit TEKA

Condition: excellent (used), Here we offer you an Omron SCARA industrial robot. Omron SCARA Industrial Robot with PB Programming Box R6Y XGL400 XG Series SCARA robots for industrial applications: - Higher reliability (no belts on XG series, no moving electronic parts). - High precision and speed - Minimal maintenance - Ease of use - High rigidity - Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. Payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Fpodjh H D Rtepfx Agrjb Repeatability XYZ: +/-0.01 mm R: +/-0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/-140 º Y-axis +/-144 ° Z-axis -- ° R-axis +/-360 ° Type: R6Y XGL400150 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. Fsdpfx Ajxrknmsgrspb OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: good (used), dimensions: 4200x2750mm height: 2400mm Fpedpfx Ajhtzgpegrsb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Press force: 130 tons Fodjxdfqmspfx Agrjpb Bending length: 3,250 mm Year of manufacture: 02.2016 More information and video available on request ...

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Fpsdpfx Agewypqlorjb Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: excellent (used), Year of construction: 2007, A cell with an ABB robot IRB 340 M2004 Type B – 34-51225 One of the fastest pick-and-place robots of the decade Delta robot for fast feeding, detail recognition, and stacking Quantity: 10 units Year of production: 2008 Controller: ABB M2004 Number of axes: 4 Pay capacity: 1 kg Robot weight: 140 kg Fodpferbh Uxsx Agropb Reception: Diameter - 1130 mm Height - 250 mm Turnover - unlimited The cell has two belt conveyors with a length of 65 cm and a width of 100 cm PRICE for a complete A-robot: €6,400/unit PRICE for a robot in a cell: €7,100/unit ⤵ (with image processing system and software)

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Fsdpfsnr E Enex Agrspb Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: ready for operation (used), Year of construction: 2017, A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible. Fodoxbhhcspfx Agrjpb

Condition: good (used), Dimensions: 5500x2750mm Height: 2400mm Fedohtzgdjpfx Agrspb

Condition: excellent (used), Year of construction: 2007, load capacity: 5 kg, arm reach: 704 mm, Fanuc LR Mate 200 iC robot (E-29388) with Cell Vision System Fsdpfxeqgck Dj Agrepb Country of origin: Japan Year: 2007 Control system: R-30iA MATE Number of axes: 6 Load capacity: 5 kg Reach: 704 mm Repeat accuracy: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Fpodpfowc A Rdsx Agrob

Condition: excellent (used), Year of construction: 2008, load capacity: 1 kg, Cell ABB IRB 340 M2004 Type B Robot - 34-51225 Country of production: Sweden Production date: 2008 Control system: ABB M2004 Number of axes: 4 Load capacity: 1 kg Robot weight: 140 kg Range: Diameter - 1130 mm Height - 250 mm Rotation - no limit Cell dimensions: Length - 150 cm Fodpfx Aoqffhhogropb width - 145 cm Height - 240 cm The cell has two belt conveyors with a length of 65 cm and a width of 100 cm.

Year of construction: 2008, condition: excellent (used), Robot cell for leak testing consisting of: Robot FANUC LR Mate 200iC/5L - 2008, Table for measurements, equipped with 8 light curtains, Fedpfx Agjn D D E Tjropb 2 pieces of Innomatec equipment for leak testing, type LTC - 502. The cell has a safety system and CE

Condition: used, Frame size: 4100 x 2520 mm Fpsdpjxctwlsfx Agrsb Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Fedpfx Aexct Anjgrepb

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, double-sided, rotational speed infinitely variable, type plate available, 2008 ACME Robotic Polishing Cell with Fanuc M-710i Robot – Fully Automated Metal Finishing Solution Fjdpfx Asxtftyogropb Looking for a high-performance robotic metal polishing system? Don’t miss this 2008 ACME Manufacturing Co. Robotic Polishing Cell, engineered for precision, consistency, and automation. Ideal for metal finishing, surface treatment, automotive, aerospace, or industrial manufacturing. 🔧 Manufacturer: ACME Manufacturing Co. 🚨 Machine Type: Robotic Polishing Cell 📅 Year of Manufacture: 2008 🤖 Robot Model: Fanuc M-710i 📍 Location: Ireland 📦 Condition: Good – fully operational and maintained 🟢 Availability: Immediate ✅ Machine Overview: This 2008 ACME robotic metal polishing cell is a fully automated surface finishing system equipped with a Fanuc M-710i 6-axis robot and designed for precision metal polishing in high-volume environments. Ideal for manufacturers in medical device, automotive, aerospace, general engineering, or stainless steel finishing sectors. 💡 System Includes: ✅ Fanuc M-710i Industrial Robot – Reliable 6-axis automation for complex polishing paths ✅ Two Twin-Head Polishing Stations – Simultaneous dual-surface processing ✅ Automatic Polishing Paste Delivery Units – Supports both fine and coarse pastes for optimal finish ✅ Vibration Monitoring Point – Ensures consistent surface quality and machine health 📈 Benefits: Increased throughput and reduced labor costs Repeatable, uniform polishing quality Fully automated and programmable – minimal operator input Compact, integrated cell for efficient floor space use Core Functionality Material Removal: The robotic system employs abrasive belts or wheels to remove material from workpieces, effectively smoothing edges, removing imperfections like flash, and achieving specific surface finishes. Precision and Repeatability: Unlike manual polishing, which can vary from part to part, robotic systems ensure consistent and repeatable results, crucial for high-precision applications. Versatility: ACME cells can be adapted for a wide range of materials and part geometries, including orthopedic implants, automotive components, and more. Integrated Automation: These cells often feature part handling systems, like conveyors and dual-drawer arrangements, to enable continuous and unattended operation. Dust and Sound Containment: Built-in enclosures help confine dust and noise generated during the process, improving safety and environmental conditions. Key Features and Benefits Increased Production Rates: Robotic polishing can significantly increase the number of parts processed per hour compared to manual methods. Reduced Costs: By automating the process, companies can reduce abrasive media costs, labor costs, and potentially decrease scrap rates. Improved Safety: Robotic systems eliminate the need for operators to manually handle potentially hazardous materials and tools. Enhanced Consistency: Robots deliver consistent, repeatable results, ensuring uniform quality across all parts. Process Optimization: ACME cells allow for programmable belt speeds and other parameters, enabling optimization for different materials and finishes.

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Fpjdpoxdm Uajfx Agrjb

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA Fsdpfxoxgqy Eo Agrjpb EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg The most important elements of the assembly/robot cell are as follows: Fpedpfxjri S Hks Agrob Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Fpsdpep Am T Usfx Agrsb Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 230106AR0001, overall weight: 25 kg, load capacity: 5 kg, arm reach: 1,200 mm, pivoting range: 360 °, Kassow KR1205, as good as new. Used as a demonstration setup with camera and is completely equipped. Fpedpfxjwzanko Agreb