Used Welding Robot Cell for sale (8,349)

Condition: used, Year of construction: 2023, 2023 Cloos Robot Welding Cell With QRC-300 Robot & Qineo Next 452 Premium MIG/MAG Welding Source - With Leuze Electronic MLS Safety Light Curtains, Welding Torch Cleaner & Pendant Controls. Dual Rotary Transfer Table dimension 650 x 450mm. Cloos QRC-300 Robot- Swivelling Range Axis 1 -170 ° / +170 °, Axis 2 -90 ° / +125 °, Axis 3 -220 ° / +70 °, Axis 4 -170 ° / +170 °, Axis 5 -135 ° / -135 °, Axis 6 -300 ° / +300 °, Swivelling Speed Axis 1 200 °/sec, Axis 2 200 °/sec. Axis 3 230 °/sec, Axis 4 490 °/sec, Axis 5 540 °/sec, Axis 6 520 °/sec. Working Area Ø3,000mm. Range 2,000mm. Pay Load 8kg. Repeatability +/-0.1mm. Floor Space 400 x 400mm. Weight 110kg. S/No. 0881590000-20040 (2023). Qineo Next 452 Premium- Welding Current 25A/15V-450A/36.5V. Welding Current At 60% Duty Cycle* 450A/36.5V. Welding Current At 100% Duty Cycle* 350A/31.5V. Open Circuit Voltage 80V. Mains Voltage 380V-480V/3 Phases. Connection Cable 4 x 6mm2. Mains Fuse Slow-Acting 32 A. Type Of Protection IP. Insulation Class F. Type Of Cooling F. Dimensions L720 x W340 x H500mm. Weight Of Power Unit 63kg. Weight Of Cooling Module 28kg. S/No. Qinx 1963 (2023). Wire Drive Units QINEO NexT-Wire Feed 30m/min, Wire Ø0.8-2mm. Overall Dimensions W350 x D270 x H230mm. Weight 10.2kg. Ksdeyx Hzxjpfx Abgolr

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B Kedpjwypqlsfx Abgjlr - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2735636, total height: 2,300 mm, total width: 2,230 mm, total length: 4,000 mm, overall weight: 3,500 kg, Equipment: cabin, Reis Robotics Welding Robot Cell SRV6-C (Year of Manufacture: 2003) Complete system comprising robot, positioner, and power source Kledpjyubygofx Abgor Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot weight: 200 kg ID no.: 2735636 Commissioning no.: 52 1050 Axes: 6 Typical application: MIG/MAG welding Positioner – Reis RND01 (Turntable) Type: RND01 Manufacturer: Reis Robotics Year of manufacture: 2003 Commissioning no.: 52 1050 Machine weight: 300 kg Function: Single-axis turntable / welding positioner Application: Holding and rotational positioning of welding jigs/fixtures Control: Integrated with the robot control system Control cabinet of the cell Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electrical connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fusing: max. 5 A Pneumatics: Pmin: 5 bar Pmax: not used as per nameplate (no hydraulics present) Control cabinet weight: 125 kg Welding power source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulsed arc / Synergic programs Compatible with Reis robot controllers Accessories: Torch kit Hose assembly Cooling circuit (external tank visible) Dimensions: 4.0 × 2.23 × 2.3 m (Robot welding cell in closed design) Operating hours counter: 29,593 h

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm Kjdonr E Enepfx Abgelr All together in an enclosure with safety door. Plant can still be visited in operation.

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Ksdpfxswc A Rds Abgolr

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Klodoxgqy Ejpfx Abger Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: good (used), dimensions: 4200x2750mm height: 2400mm Kledpfx Ashtzgpobgjr

Condition: good (used), Dimensions: 5500x2750mm Klsdpfxjhtzgdj Abgor Height: 2400mm

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 Kodsp Am T Uepfx Abgelr - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €11,200 + VAT (or nearest offer) Enquiries welcome for complete system or individual components. Kledsymd E Nepfx Abgor

Condition: excellent (used), Year of construction: 2017, operating hours: 2,700 h, functionality: fully functional, arm reach: 2,033 mm, type of input current: three-phase, total height: 2,360 mm, total width: 5,203 mm, total length: 7,442 mm, load capacity: 600 kg, overall weight: 10,000 kg, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 600 kg, protection type (IP code): IP54, year of last overhaul: 2025, compressed air connection: 6 bar, repeat accuracy: 0.06 mm, Equipment: cabin, We are offering this very well-maintained DALEX / KUKA spot welding cell with robot handling, year of manufacture 2017. Manufacturer: DALEX / KUKA Model: Spotwelding Cell Robot Manipulated Machine type: Welding Robot Year of manufacture: 2017 The machine is a specialized welding system designed for spot welding pre-formed stainless steel components. The welds are created with pneumatically operated resistance spot welding tongs or a pneumatic spot welding unit. The setup includes one robotic arm for performing the resistance welding process and a second robotic arm for positioning and handling the welded parts. Out of operation since 2024. Annually maintained, including maintenance scheduled for 2025! Cell dimensions: 7442 mm x 5203 mm Robotized spot welding cell in compliance with EC conformity 200/427EG 2004/108/EU Electromagnetic Compatibility (EMC) / 2006/95/EU Low Voltage Directive / 2003/10/EG Noise Emissions 2x KUKA KR60-3 robots (service by KUKA scheduled for 01/2025) Operating hours: Robot 1: 4,500 h / Robot 2: 8,200 h Nominal payload capacity: 600 kg Maximum reach: 2,033 mm Mounting position: Floor Repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Kljdpfxjyhcips Abger Ambient operating temperature: 10 °C to 55 °C (283 K to 328 K) Protection rating (IEC 60529): IP65 2x KUKA KR300 R2500 ultra robots (service by KUKA scheduled for 01/2025) Operating hours: Robot 1: 2,700 h / Robot 2: 6,100 h Nominal payload capacity: 300 kg Maximum reach: 2,496 mm Mounting position: Floor Repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Ambient operating temperature: 10 °C to 55 °C (283 K to 328 K) Protection rating (IEC 60529): IP65 Control software: SW8.3.30 Resistance welding unit Harms & Wende mid-frequency inverter 2x Genius HWI408 If you have any questions or require more information, please send us a message or give us a call.

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! Klsdpfx Abjhzhynogsr We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: Klsdperl S Ufofx Abgjr The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: used, Year of construction: 2017, ABB robot cell with Clean Laser Manufacturer: ABB / Clean Laser Type: IRB4600 Year of manufacture: 2017 System consists of: ABB robot IRB4600 Control cabinet Handheld control device Laser cleaning unit Clean Laser type intelliScan30 Klodpfxswrcn Uo Abgor Extraction system TEKA 16426ä

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Used Welding Cell / Welding Robot (MAG/MIG) – Immediately Available Manufacturer: TRUMPF Model: TruArc Weld 1000 Year of Manufacture: 2021 Standard Features: - Universal Robots UR10e - 3D welding table by Demmeler Ksdjy A Iixspfx Abgslr - Telescopic center separation - Linear axes - Fume extraction - Safety enclosure - Shielding gas connection - Compressed air connection Welding Source: - Fronius high-performance MAG/MIG welding source - Robotic welding torch - 3.25 m MIG/MAG robot torch package - Fronius wire feeder - Wire spool holders - Connection for wire drum Control System: - Robot controller with easy programming - Central control unit Operation: - Foot switch - Control panel for easy programming TECHNICAL DATA: Axis Data Type: Collaborative industrial robot arm Number of axes: 6 Reach: 1300 mm Repeatability: ±0.05 mm Welding Source Type: Fronius TPS 320i C PULSE Welding current range MIG/MAG: 3–320 A Dimensions and Weights Base version (without enclosure, cobot in transport position): 2540 × 2250 × 1600 mm Weight (base version): 1317 kg Cabin dimensions: 3605 × 2454 × 2818 mm Weight incl. enclosure: 2940 kg Working Area[1] Base version: Open area, therefore no physical boundary Enclosure with open center separation: 3200 × 1000 × 1150 mm Enclosure with closed center separation: 1600 × 1000 × 1150 mm [1] The actual component size depends on whether the cobot can reach the welding points. Typical maximum component sizes in the base version without safety enclosure can be, for example, 3000 × 600 × 600 mm or 3800 × 600 × 100 mm. If the part is welded in several steps, even longer components are possible. Data Transfer: - USB interface Safety: - Safety device - CE marking This used machine can be inspected under production conditions. All information is provided without guarantee – sale is without any warranty or guarantee. Subject to prior sale.

Condition: excellent (used), Reach: 1300 mm Payload: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Welding machine Lorch S5 RoboMIG XT Cobot Welding current: 400 A. Ksdpjw N N Dcsfx Abgolr

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Kodpfxey Efmge Abgolr This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Ksdpoyx Exvefx Abgelr

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Klodpfxoy D Nwte Abgsr Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp (power selectable based on application requirements) Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Wide range of programming options (NC, shopfloor, CAD/CAM) Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Kledjw U Ezzopfx Abgsr Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: repair required (used), Year of construction: 2002, Welding robot with 6 axes Kjdpfx Aboywlgkogolr Rotary table for workpiece holding 6th axis defective KPS module defective

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, Welding robot KUKA from December 2019, very little used. 253 hrs. The robot is connected, available for testing, inspection in Lithuania. Industrial robot KUKA KR8 R2100-2 arc HW Working lifting load: 8 kg Maximum reach: 2100 mm Number of axes: 6 Positioning accuracy (ISO9283): +-0.04 mm Fixing: floor Protection class: IP54 Three-axis positioner KUKA KP3-H2H500 Axes: 3 Working load: 500kg (per conductor side) Positioning accuracy (ISO9283): +-0.04 m Distance between discs: 3 200 mm Merkle Hight Pulse 452 rs welding source kit Phases: 3*400V Kodpfxsrgqx Ue Abgjlr Working range: 20 - 450A Welding voltage: 15 - 36.5 V Protection class: IP23 Applications: MIG/MAG, Pulse ARC, MMA/s Components: torch, cables, wire feeding mechanism, wire reel with bracket. Software: KUKA Office Lite KSS 8.5 offline TBI automatic clamp. Burner cleaning station 3 functions: pniaumo - nozzle cleaning, wire cutting, silicone coating. If you have any further questions, we will be happy to answer them.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 27876, overall weight: 4,000 kg, total length: 7,000 mm, total width: 2,500 mm, total height: 2,700 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/26 and 16/04/26! TECHNICAL DETAILS Robot system: IRB 1400 M 2000 MACHINE DETAILS Operating voltage: 3 x 400 V Frequency: 50/60 Hz Connection: 4.5 kVA Dimensions & weight L x W x H: 7000 x 2500 x 2700 mm Machine weight: 4 t Kledpoyk Hlmofx Abgor External reference: 8

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F17/5BTZA1/A/01, arm reach: 800 mm, load capacity: 2 kg, empty load weight: 100 kg, number of axes: 4, TECHNICAL DETAILS Kljdeyuayljpfx Abgjr Number of axes: 4 Reach: 800 mm Payload: 2 kg MACHINE DETAILS Control: Teach-in Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,300 mm Unladen weight: 100 kg Transport packages: 1 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,755 h, functionality: fully functional, machine/vehicle number: 12543, type of input current: AC, load capacity: 1,000 kg, input voltage: 400 V, type of cooling: water, Severt Welding Robot OTC-IRB-AX-V 6 L - Suspended 6-axis arm on 8m traversing system - OTC Daihen controller, software update from AX-C to AX-2 Kledpfxeydc Eis Abger - 2 stations, each with a 1-axis positioner rated for 1000kg load and 1000Nm torque - Power source: OTC DP 500, 100% duty cycle at 350A, 60% at 500A - Push-pull torch - Touch sensor - Seam tracking sensor - Water-cooled gas nozzle - Wire feeding via rolliner - Torch alignment gauge included - Various accessories: hose packages, wire guide spirals, contact tips, gas nozzles, etc. Dismantling / transport, etc. is to be arranged by the buyer.