Used Roller Leveler for sale (14,262)

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Ndedpfx Asv Sthgofueb Terms of delivery: ex location

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 Ndjdpozafi Njfx Afuob main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. Njdpozn N Ecofx Afuodb • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Nedpfezb Dp Rox Afuodb Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine Nodpfxoy Spvfj Afusdb ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles Ndodsyyz Ebepfx Afujb The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: good (used), Year of construction: 2014, Over 4,000 m of conveying system technology, TGW, nominal width (NB) mostly 470 mm and also 620 mm – used. Price ex works (net): only €525,000, disassembled, packed, and loaded, including feet, etc.! Nodjzbyb Aopfx Afuedb Price for larger portions available upon request! Manufacturer: TGW Year of manufacture: 2014 Components, e.g.: BFT2000 KRF curved roller conveyor BFT2000 ZKRF infeed/outfeed curved roller conveyor BFT2000 RFM roller conveyor multi BFT2000 GF belt conveyor BFT2000 ART all-round roller table Internal chute BFT2000 RB roller track BFT2000 PAS pop-up sorter BFT2000 ZAS timing belt infeed/outfeed module BFT2000 KUS chain transfer unit Some Transnorm belt curves, 180 degrees, approx. 6-7 pieces with a relatively small radius Optionally including 2 lifters Sale without control system (light barriers, sensors, scanners, control cabinets, etc.), but these are available for an additional charge! Condition: good Available: from Q4 2026 Location: Hamburg P.S. Upon request, we will gladly send you the 396-page product list or a shorter AI summary!

Condition: good (used), Year of construction: 2023, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, conveying length: 9,600 mm, construction height: 800 mm, transport width: 600 mm, Item no.: 1000001360 Scissor roller conveyor - L: 3.9 - 9.6 m Ndedpfx Afjq D Dlweuob Technical data: Conveyor width: 600 mm Overall width: 724 mm Conveyor length: retracted: 3,895 mm / extended: 9,595 mm Total height / conveying height: 755 - 1,155 mm (infinitely adjustable) Number of supports: 6 Support design: including swivel castor, braked Roller spacing / centre distance: 55 - 150 mm Castor axle type: external thread, M8 Castor per axle: 3 Castor diameter: 50 mm Castor material: Plastic Castor colour: sky blue Cheeks material: galvanised steel Requirements for the conveyed goods: Bottom of the conveyed goods: level and largely closed, e.g. KLT, beverage crates, cardboard boxes, tyres Max. weight: 50 kg/m Minimum length: 180 mm (450 mm, with completely extended track) Other lengths and conveyor widths possible on request.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed Ndsdpszi S R Rjfx Afujb • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: excellent (used), functionality: fully functional, Vegetable peeler (continuous peeler) Type: Peeler Ndedpjz D Ifwsfx Afujb An industrial vegetable peeler is a professional device designed for the continuous, mechanical peeling and cleaning of root vegetables (such as potatoes, carrots, parsley root, beets, and celery). It is intended for fruit and vegetable processing plants, raw agricultural produce packing facilities, catering establishments, and large central kitchens. The peeling process is carried out continuously by rotating rollers covered with an abrasive material. The raw material, which moves along the working chamber, is evenly peeled. A spray pipe mounted above the rollers continuously washes away the peeled skin and contaminants, ensuring a high level of hygiene and excellent quality of the prepared vegetables.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 6,500 mm, 1x Pallet flow rack by Bito, fully functional. Capacity for 96 pallet positions. Year of manufacture: 2021. Basic dimensions: W 10.20 m - D 5.20 m - H 6.50 m. Pallet weight min: 250 kg, max: 1000 kg. Channel width / beam length: 2400 mm. The floor-level roller tracks are foldable for flexible cleaning access underneath (see picture no. 4). Ndjdpfxsw Az Ems Afueb Inspected and serviced annually. The system is already dismantled and in storage. Europe-wide shipping available for an extra charge.

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Ndodpfxjyrdg Do Afujb Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit Nsdpfx Aozg Il Ssfujdb The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 160 mm, workpiece width (max.): 1,100 mm, Wide belt sanding machine Manufacturer: Bütfering Type: Optimat SWT 124 RK Year of manufacture: 2010 Compact wide belt sanding machine, originating from a parquet manufacturing facility. Suitable for sanding solid wood, frames, and glued wood panels, as well as MDF, chipboard, or plywood. Allows for 2 grit levels in a single pass. Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x Calibrating unit / steel contact roller, profiled, diameter 160 mm, approx. 15 kW 1x Combination unit (roller / sanding shoe), profiled and rubberized contact roller approx. 65 Shore, diameter 160 mm, pneumatic pressure bar, approx. 11 kW Feed speed, continuously adjustable, approx. 3 - 13 m/min., approx. 1.1 kW Sanding belt dimensions: 1120 x 1900 mm with belt blowing device Compressed air: 8 bar Extraction capacity: approx. 2900 m3/h Voltage: 400 V, 3 phases, 50 Hz, 63 A Total connected load: 28 kW Dimensions approx. 1700 x 1850 x 1900 mm (L x W x H) Nedpfjzznkkox Afujdb Weight approx. 1800 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Nodpfx Aszu Ryhjfujdb Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, For sale is a professional Stratasys Objet30 V2 3D printer, manufactured in 2013. Technical specifications / features: * Manufacturer: Stratasys / Objet * Model: Objet30 V2 Nsdszwv E Iopfx Afuodb * Year of manufacture: 2013 * Printing technology: PolyJet * Build volume: approx. 294 × 192 × 148 mm * High level of detail and fine surface finish * Professional industrial-grade equipment * Original base frame on rollers Ideal for prototyping, product development, model making, design, and technical components. Used, condition appropriate for its age. Inspection possible by appointment. Collection by the buyer. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Njdpfx Aoy Ed D Dofuedb Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: used, Year of construction: 2024, 935-1450 Expert opinion for operating equipment Drawbar with drawbar eye 51mm Track eradicator / hydr. front level board s+double spring Coulter set HM goose foot coulter / DSTS roller 111mm Air brake Tined Weeder DSTS roller 111mm Lighting / filine / Nodpfx Afotvgm Ssusdb

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images Njdpfxjy Tzhpe Afuodb - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Njdey D I I Ropfx Afujdb Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: new, Year of construction: 2026, functionality: fully functional, 1.86 m Roller Conveyor with Measuring Guide – Precision Roller Table for Cutting and Transporting Metal Materials The 1860 mm roller conveyor with an integrated measuring guide is an advanced solution for supporting material cutting and feeding in industrial settings. Thanks to its high load capacity, sturdy construction, and precise length measurement system, this conveyor is perfect for use with band saws, circular saws, and other metalworking machines. Seven steel rollers ensure smooth movement of workpieces of various shapes and sizes. Key Features Built-in measuring guide – precise length control without the need for additional tools 7 steel rollers (60 × 360 mm) – even weight distribution and smooth transport High load capacity of 900 kg – suitable for heavy pipes, profiles, bars, and shafts Adjustable height (650–1100 mm) – easy integration with different machines Modular extension capability – for building multi-segment roller tables Construction and Technology The CORMAK roller conveyor is made of deformation-resistant steel profiles. Stability is ensured by reinforced legs with crossbars. Each of the seven rollers is mounted on ball bearings, providing smooth and secure material guidance. The integrated measuring guide with a scale allows for quick length setting without the need for additional stops or measuring instruments. Precision and Work Efficiency The roller table with a measuring guide significantly shortens material preparation time by eliminating the need for manual measuring of each piece. Thanks to the precise measurement system, repeatable production can be carried out with high accuracy. Accurate material positioning improves cut quality, reduces material waste, and enhances workplace safety. Applications The 1.86 m roller conveyor with measuring guide is designed for production facilities, metalworking workshops, and companies involved in steel structure prefabrication. Especially recommended for: Precision cutting of pipes, bars, and steel profiles Operation with band saws and circular saws Feeding and receiving parts during batch processing Creating linear transport systems Standard Equipment 7 steel rollers with ball bearings Njdpfxsxp Iy Us Afuodb Steel frame with cross reinforcements Height adjustment system (650–1100 mm) Integrated measuring guide Adjustable leveling feet Technical Specifications Roller diameter 60 mm Roller length 360 mm Number of rollers 7 Conveyor length 1860 mm Conveyor width 450 mm Height adjustment range 650–1100 mm Maximum load capacity 900 kg Weight 50 kg

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Ndedpfx Asz A Hhujfujb

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data Nsdpfxoxmfc Uo Afuedb TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2023, Chassis 40km/h Tined Weeder DSTS-Roller Lighting Expert opinion for operator / 40km/ AB:2158642 15.06.2023 hydraulic stone protection telescopic drawbar Cat / III/IV coulter set HMSpitze+Leitbl 25 coulter set Flügelsch flat 30m / roller level board DSTS Ndjdpfx Ajt Dnuhefusb

Condition: good (used), functionality: fully functional, Offered is a hygiene sluice/disinfection sluice by Blue Level DLSO 2000. 400V, 16A. Complete V2A stainless steel construction. New brush rollers. Dimensions (L x W x H): 273x95x177 cm. Immediately ready for use, fully operational. Further information upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty or guarantee. Ndedpoynkh Tofx Afujb