Used Roller Press for sale (35,311)

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Nedpfex Irlzsx Agzjwr Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: new, Year of construction: 2025, operating hours: 9 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers Nwsdogl Nlmepfx Agzer + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley Type CT-12 -Load capacity: 18000 kg -Rollers: 12 polyurethane rollers Nsdpew Skqisfx Agzswr -Number: 4x transport rollers available -Price: per piece -Dimensions: 480/310/H100 mm -Weight: 36 kg/piece

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic Njdpfsxxlb Uox Agzowr - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Condition: used, L 5990 mm, W 2500 mm, H 2700 mm. Weight 4451 kg Nwodpjvkn Irofx Agzor

Condition: used, 3700mm long, 960mm high, and adjustable Storage location: Nattheim Nwjdpfsv Dauqjx Agzsr

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Nwsdpjx Iri Hefx Agzsr Sale is ex works against prepayment, without warranty or guarantee.

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Njdpfxjwmmras Agzjwr Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: used, Year of construction: 2002, pressing force: 880 t, lifting height: 305 mm, SLIDE .. total force (nominal): 880 to .. stroke: 305 mm .. cutting velocity min.: 5 mm/s .. cutting velocity max.: 70 mm/s .. closing velocity: 200 mm/s .. returning velocity: 200 mm/s V-RING .. nominal force: 400 to .. stroke: 40 mm COUNTER RAM .. nominal force: 200 to .. stroke: 40 mm TOOL DIMENSIONS .. lower table (left-right): 1010 mm .. lower table (front-back): 1600 mm .. upper table (left-right): 1000 mm .. upper table (front-back): 1000 mm .. shut height max.: 460 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 450 mm .. sheet thickness max.: 16 mm .. feeding step min.: 1 mm .. feeding step max.: 999.9 mm .. sheet length min: 3950 mm .. speed max.: 48 m/min .. Vertical adjustment: 140 mm .. nominal force: 60 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 188 kW Nwsdpfex Nd Udex Agzjr .. main drive power: 160 kW ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. decoiler: no .. leveller unit: no .. waste cutter: yes

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting Nwsdpfxsb A Hdke Agzor -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Nedpfsvkn Nvjx Agzswr

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Nodpfx Agevviytozewr Storage location: Nattheim

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, year of manufacture 2000, optionally available with matching Paal KEM-1400 conveyor belt Technical specifications: Nedsx Iritjpfx Agzjwr Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale size: 750 x 1100 mm, variable length Tying: fully automatic with 4-fold wire Throughput: at 35 kg/m³: approx. 9.5 t/h at 60 kg/m³: approx. 16.5 t/h at 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The baler was dismantled from running operation. Complete documentation available. Please note: All technical data is based on manufacturer information. We assume no liability for the stated data or for potential errors. The offer is subject to change, prior sale and revocation at any time. Inspections are possible by appointment. Sale takes place ex works, prepayment, without warranty or guarantee.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) Nwjdpfxju R Sxxo Agzor - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1994, pressing force: 200 t, table length: 1,780 mm, PRESS DESIGN Nwsdjx Nd T Tepfx Agzjr .. drive system: eccentric / crank .. frame design: H-frame, tie rod .. openings in uprights: yes .. table cushion: yes .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1780 mm .. table surface (front-back): 1300 mm .. opening in bed (left-right): 1445 mm .. opening in bed (front-back): 260 mm SLIDE .. slide force: 200 to .. table surface (left-right): 1500 mm .. table surface (front-back): 1100 mm .. stroke: 178 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 150 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) .. number of cushions: 11 .. cushion force: 3 to TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 542 mm .. passline opening (free passage in side columns): 900 mm DECOILER .. design: twin reel .. sheet width max.: 260 mm .. coil weight max.: 2 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm LEVELLER UNIT .. sheet width max.: 250 mm .. sheet thickness max.: 2 mm .. sheet thickness min.: 0.3 mm .. number of leveller rolls: 19 .. diameter of leveller rolls: 18 mm .. feed velocity min.: 5 m/min .. feed velocity max.: 60 m/min .. loop controls: yes STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 250 mm TRANSFER SYSTEM .. distance between tools, stroke X max.: 260 mm .. distance between tools, stroke X min.: 60 mm .. stroke Y fix: 55 mm .. Inner width clamping rails closed max.: 455 mm .. Inner width clamping rails closed min.: 205 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes .. gripper transfer system: yes + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data sheet available)

Condition: good (used), Workbench, clamping plate, ball roller table, ball table, ball roller table Nwedpfx Aoupphgjgzjr -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg

Condition: excellent (used), Year of construction: 1952, Robust workshop machine with character – manufactured in the renowned German factory A. Nothelfer & Söhne Ravensburg. Year of manufacture: 1952, but still fully operational, complete, and ready to work! - Siemens-Schuckert Motor • Power: 0.8 kW Nwedpfxjw E I Sfo Agzsr • Speed: 1,400 rpm • Power supply: 3-phase 220/380V • Current: 3.5/2 A • Frequency: 50 Hz • Cos φ: 0.8 - Technical condition • Fully mechanically operational • Belt drive with three-phase motor • New supporting frame with mounting holes • Foot pedal control • Electrical inspection recommended (older visible power system) - Additional information • Original nameplates • Type designation illegible, but identified by factory serial number 134058 • Work table with slots for fixture mounting • Solid, heavy construction – built for decades of use • Weight: 480 kg - Applications: stamping, punching, cutting, bending metal parts – ideal for the workshop, forge, tool production, or for an industrial machinery collection.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Nwjdsvvkmbopfx Agzor

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Njdjx Irigepfx Agzjwr Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. Nwsdpfox N D Spjx Agzor The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm Njdex H Rr Djpfx Agzowr -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Nedpfx Agevvkl Djzowr Storage location: Nattheim

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,350 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year of Manufacture 2009 Technical Specifications: Manufacturer: Europress Model: 6500 V5 H4 Year of Manufacture: 2009 Operating Hours: approx. 15,334 hours Number of Bales: 138,097 bales Main Press Force: 120 t Specific Press Force: 142 kg/cm² Feed Hopper Dimensions: 1,650 x 1,100 mm Filling Volume: 3 m³ Filling Volume per Press Cycle: 1.58 m³ Bale Dimensions: 730 x 1,100 mm Drive Power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total Connected Load: 83 kW Current Consumption: 150 A Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale Weight: 450–900 kg Hydraulic Tank Capacity: 1,200 L PLC Control: Siemens S7-200 Control Panel: Siemens Touchscreen Press Dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport Dimensions Press: 9,965 x 2,500 x 2,900 mm (L x W x H) Press Weight: approx. 28 t Work Carried Out on the EP 6500 V5: Nwsdpfxjx Irh Ne Agzor - Completely derusted and repainted - Inner steel floor of the press completely renewed - Ram (steel structure) overhauled - Complete overhaul of the horizontal and vertical lance boxes - Complete renewal of internal Hardox wear plating - All hydraulic hoses new - Both hydraulic cylinder lifters renewed - Knives and counter knives replaced - All hydraulic cylinders resealed and tested - All slide and guide plastics replaced - Wire deflection pulleys renewed - Replacement of various cables and sensors - Replacement of various electrical components (control cabinet) - Complete inspection of electrics/control system - Complete hydraulic pressure inspection Remarks: The machine has been overhauled, inspected, and tested by us. You can find the video on our website or YouTube channel. Inspections, including powered tests, are possible at any time by prior arrangement. If you have any questions regarding the machine, we are happy to assist you by phone Monday to Thursday from 08:00 to 14:00, and Friday from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for possible errors. Offers are subject to change, prior sale, and withdrawal at any time. Inspections are possible by prior arrangement. The sale is ex location, without any warranty or guarantee.

Condition: good (used), Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 250 mm Nsdpfxob A Iuio Agzjwr -Weight: 10 kg

Condition: good (used), Roller conveyor, conveyor belt, roller track Nwodpfxob A Rube Agzor -Roller width: 400 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Central spacing: 100 mm -Height: 300 mm -driven: via flat belt -without: flat belts -Dimensions: 2000/520/H300 mm -Weight: 90 kg