Used Rolling Tools for sale (42,819)

Condition: used, Year of construction: 1989, x-travel 400 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 460 mm spindle taper SK 40 spindle turning speed range 31,5 -5000 U/min spindle drive 5,5 kW quill stroke 80 mm vertical head swivelling +/- 90 ° control DIALOG 11 feeds x/y/z -stepless 3000 mm/min rapid traverse 6 m/min total power requirement 13,8 kVA weight of the machine ca. 2 t dimensions of machine L x W x H 2,73 x 2,0 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolant Nsdpsz Ekzkjfx Afuodb

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Njdpfx Afez Ebvrouedb Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Nsdpfjz Ebu Uex Afuedb Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: like new (used), Year of construction: 2003, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Heidenhain iTNC 530 tool taper HSK 63 voltage 400 V control voltage 24 V weight of the machine ca. 10,5 t Ndsdpoz Ebrasfx Afuob - Current configuration C 40 U: o Vertical machining center o 4 axes o Travel ranges: X 850 mm, Y 700 mm, Z 500 mm o Table size: X 1070 mm, Y 700 mm o Carousel tool magazine, 40 positions o Max. tool length in magazine: 300 mm o Spindle: HSK63, 10,000 rpm, 25 kW, 159 Nm o Coolant system: AK, IKZ 40 bar, 1,000-liter capacity, steel filter o Blow-off air IK & AK o MMS system MHT o Scraper belt chip conveyor o Polycarbonate disc without Rotoclear o Heidenhain iTNC 530 machine control o Emulsion mist extraction (Preparation) o Installation dimensions with coolant system: 3,930 mm x 4,400 mm x 3,040 mm o Laser measurement system for tools, including breakage detection o 3D measuring probe o Spindle hours: 14,578 h o Machine hours: 47,069 h

Condition: excellent (used), Year of construction: 2014, The EFI VUTEk GS5000r is a 5-meter, premium roll-to-roll UV inkjet printer designed to balance high-definition point-of-purchase (POP) quality with heavy-duty billboard production speeds In production, demo possible Western Europe Installation possible upon request Performance & Productivity Fast-4™ Mode (Billboard): Up to 3,100 ft²/hr (approx. 288 m²/hr). Eight-Color Mode (POP Quality): Up to 1,033 ft²/hr (approx. 96 m²/hr). Production Management: Standard multi-queue functionality driven by an EFI Fiery XF RIP front-end system. For further yechnical detisl please refer to enclosed brochure Ndedpfx Aez Dh Ekjfujb

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: Nedpfxoytb Uho Afusdb - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Year of construction: 1989, condition: used, functionality: fully functional, Model: Gemini ESCO D6-SR with unwinding reel Year of manufacture: 1989 Max. material diameter: 6.35 mm Max. machining length per stroke: 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine only): Machine bed, partially, approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Nodsyip E Tepfx Afuodb Control voltage: 110 V 50Hz Rated power: 3.4 kW Rated current: 6 A

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Mounting holes 4 Pitch fixing holes 320 mm Nodpfoywy U Nsx Afusdb Length 400 mm Width 400 mm Height 540 mm Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation Njdpoz Dkzhjfx Afuodb * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: like new (used), Year of construction: 2008, amount 1 STK Nodpfsul D U Tex Afuedb

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Ndedpfxozbqque Afueb Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, overall weight: 40 kg, total height: 105 mm, total length: 580 mm, total width: 110 mm, Metal cutting Tooling GRESSEL - Grefors 100mm MACH-ID 9709 Make: GRESSEL Njdpfoz A Tu Ijx Afuedb Type: Grefors 100mm Year: 1999 Length:580mm Width:110mm Height:105mm Weight:40kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, Eckold tool ECKOLD - HLA60 MACH-ID 9687 Make: ECKOLD Type: HLA60 Year: 2001 Beak-Shaped shrinking dies for U-profiles They are specifically made to eliminate marring the material while shrinkin These jaws fit the Eckold KF170PD Nsdpsz A Trgofx Afuodb Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ????? ONLY COMPLETE ????? Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF TIPPER / CRANE / WINTER SERVICE SALT SPREADER Mounting plate SCHMIDT with hydraulic connections * Registration: 08/2013 Ndodpjz Dctcefx Afueb * Original Mileage: 50,324 km * Wheelbase: 4,500 mm * Front axle: leaf spring suspension * Rear axle: air suspension * Tire condition: approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Roll-off Tipper: MEILLER RK 2067, Year: 2013, max. 20,000 kg, 300 bar CRANE / Roll-off Container: MGK Type HLK 95a3, Year: 2003, Max 9.18m = 960kg / at 2.20m = 4,200 kg Salt Spreader / Roll-off Frame: KÜPPER WEISSER, Type IMSSF E35050DFA, Year: 2015, KUBOTA engine Brake disc cover, front axle load 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction package S for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, axle ratio 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe rupture protection braking system, rotating beacon left/right, reversing warning device acoustic (warning signal outside), rear window, fuse box, seats in the cab: driver's seat suspension seat comfort, sun visor, cab socket 24V, oil cooler transmission Additional Equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2-line, trailer coupling: towing hitch, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirror wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium), generator 80 A, interior filter: pollen filter, body / structure: chassis, model update from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - shifting system, front underrun protection, CB radio preparation, telephone / fax preparation, front axle cambered, immobilizer, heat-protective glazing, central locking including key, permissible gross weight 26.0 t Inspection possible during our opening hours at any time, test drive by arrangement! In the case of export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information without guarantee - errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed characteristics. We refer to our general terms and conditions and ask you to take note of them.

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm Ndodpfxjz A S Srs Afueb -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 Njdpfx Afoyym Tdouodb - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), MASTERWOOD TF 100 machining center with tool changer - used Continuous processing, Air table at the work area, Hardened, dust-protected prism guides, Ball screw spindles on all axes, Ndedjz Dh Tuopfx Afujb Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Central lubrication (manual), Sensor for panel measurement ----- Technical data ----- Min. workpiece length X: 250 mm, Min. workpiece length Y: 80 mm, Min. workpiece thickness: 10 mm, Max. workpiece length X: unlimited mm, Max. workpiece length Y: 1,000 mm, Max. workpiece thickness: 60 mm, Operating system: Windows 11, Machine control software: Masterwork MW310, Main spindle motor power: 3.3 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle mount: ISO 30 taper, Drilling unit motor power: 1.7 kW, Number of vertical drilling spindles: 10 pcs, Number of horizontal twin drilling spindles in X direction: 2 pcs, Number of horizontal twin drilling spindles in Y direction: 1 pc, Saw blade diameter of saw unit: 125 x 20 mm, Number of tools in tool changer: 4 pcs, Required air flow rate: 2,000 m³/h, Compressed air connection: 8 bar, Dimensions (LxWxH): 1,990 x 2,410 x 1,510 mm, Weight: 1,300 kg Quality information: - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm Ndodpfx Afoyh D Nnsusb roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m For cone bending, approximately 70% of the maximum plate thickness applicable to standard round rolling can be processed. For truncated cone rolling, a maximum plate thickness of approx. 8 mm can be processed. *

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Mechanical Ndedpfx Asz Avg Nofueb - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1974, total length: 4,700 mm, total width: 1,800 mm, total height: 1,700 mm, Colour: Green Empty weight: 6.500 kg Price: On request - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 1361 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 3 - Max. working width [mm]: 2000 - Top roll diameter [mm]: 200 - Bottom roll diameter [mm]: 160 - Transport dimensions: 4700mm x 1800mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Njdsz Avbajpfx Afusdb - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Deckel FP4M universal milling machine in excellent technical and optical condition. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake - Automatic feed: X-Y-Z steplessly adjustable 6.3 / 630 mm/min - Rapid traverse X-Y-Z 1300 mm/min - Fixed angle table - Vertical quill, 90 mm travel - Tool holder ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication Ndsdpoz Atxvjfx Afujb - Automatic pulse lubrication on the milling head Includes cabinet with accessories.

Condition: good (used), Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg Ndjdeu S Tbbopfx Afueb

Condition: used, functionality: fully functional, Tool Grinding Machine Manufacturer: DECKEL, Model: S 1 Technical Details Manufacturer: DECKEL Model: S 1 Speed: from 3750 to 7500 rpm Connection: 380 V Machine weight: approx. 400 kg Nodpfx Aoyw N Tusfujdb Dimensions (L x W x H): 1.2 x 0.70 x 1.40 m All information provided without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2017, total width: 100 mm, total length: 300 mm, total height: 180 mm, overall weight: 12 kg, MACH-ID 9686 Make: ECKOLD Type: HLR60 Ndedpfx Aez Arzpjfusb Year: 2017 Length:300mm Width:100mm Height:180mm Weight:12kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - WT 100T MACH-ID 9694 Make: ECKOLD Type: WT 100T Ndjdpfx Afoz Arlnoujb Year: 2018 Type WT 100 T / NFW Forming method Planishing and calibrating Special features Exchangeable inserts suitable for Finishing with custom-shaped tools Sheet thickness Steel (Rm = 400 mm2) 3.0 mm Sheet thickness Stainless steel (Rm = 600 mm2) 3.0 mm Sheet thickness Al (Rm = 250 mm2) 3.0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!