Used Room Electromedicine for sale (982)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Lodpfx Ake Adzqteqohn TECHNICAL DETAILS CONTROL Control system: Heidenhain TNC 135 WORKING AREA Travel in X-axis: approx. 300 mm Travel in Y-axis: 300 mm Travel in Z-axis: 300 mm WORK TABLE Table dimensions: 700 × 270 mm Number of T-slots: 6 MACHINE DETAILS MACHINE DATA Manufacturer: Maho Type: MH 400 P Machine type: Tool milling machine DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,800 mm Weight: 600 kg

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Lodpjzqzuusfx Akqjhn Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Deckel Type: FP1 Machine number: 54.099/08 Machine type: Tool milling machine SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Lhsdpfs Adulqox Akqjn Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL X-axis: approx. 300 mm Y-axis: approx. 300 mm Z-axis: approx. 300 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,500 mm Weight: 700 kg EQUIPMENT 2-axis digital display

Year of construction: 2017, condition: good (used), Lillnord Combi Room refrigerated chamber - used - year of manufacture 2017 - freezer room for 18 pallets, 60 x 80 (minus 18 degrees Celsius) - refrigerated room for 4-5 pallets, 60 x 80 (plus 6-8 degrees Celsius) Ledpfozn Iylex Akqohn - disassembled and stored in a warehouse - good technical condition - external cladding made of stainless steel - internal cladding painted - collection from the warehouse - price on request

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: CMZ068520231137021, For sale: lightly used French fries production line. The equipment is in full working order and available for inspection on site. The complete line covers the entire process, from potato washing and peeling, through cutting, drying and frying, to rapid freezing of the finished product. Cold storage rooms are also included. The equipment has seen very little use. All original manufacturer documentation and certificates are available. Location: Vilnius, Lithuania. Lhsdpfx Aksz Tty Toqon

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Lhsdpfx Akeuclbzsqon

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, table length: 400 mm, table width: 800 mm, type of input current: three-phase, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Lhjdpfx Akezfxubeqen Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Lhodjykrtpspfx Akqen Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Manufacturer: Deckel, Type: FP 5 CC Year of manufacture: 1990 Ljdpfx Aoz S Ubcokqshn Control system: Dialog 11 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 550 mm Spindle speed: 25 - 6,300 rpm Tool holder: SK 40 Drive power: approx. 12 kW Machine weight: approx. 5000 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 1,650 kg, Table: 800 x 400 mm Longitudinal travel (X): 600 mm Transverse travel (Y): 400 mm Vertical travel (Z): 400 mm Maximum spindle speed: 3,150 rpm Feed rate: infinitely variable Display: HEIDENHAIN Workpiece clamping: hydraulic Very good condition – hardly used! Ljdpfx Ajz Sqk Tjkqohn

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Lsdpfx Akjzvyh Djqohn

Year of construction: 1975, condition: good (used), Includes FP3L milling machine head with adjustable angle table, vertical milling head, SK 40, S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by arrangement. Lhodpfx Aksildwxoqjn

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Lsdpfezqzyqox Akqohn Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Element width: approx. 1.03 m Length: approx. 21.40 m Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Lsdpfx Asz Rpcrekqohn Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Lhodpfxsxwunzj Akqsn

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Lhsdpsq A Icqjfx Akqjn

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Lhjdpfx Aetp Nyfskqsn

Condition: used, Year of construction: 1976, x-travel 1200 mm y-travel 400 mm z-travel 460 mm Lhodpfxozip H Ne Akqsn table-size 1500 x 400 mm control konventionell tool adaptor SK40 turning speed range 45 - 2000 U/min quill stroke ja mm weight of the machine ca. 3,2 t dimensions 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 20,000 m³/h, filter area: 295 m², noise level: 75 dB, actuation type: electric, total height: 3,643 mm, total length: 2,066 mm, total width: 1,756 mm, overall weight: 1,590 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, NOVUS Airtower FT 20,000 EC – like new – only 2 operating hours For sale is a NOVUS Airtower FT 20,000 for extracting welding fumes in industrial halls. The unit was used exclusively for testing purposes and currently has only 2 operating hours. The Airtower has been technically inspected and is in perfect working order. All features are functioning correctly. There are no damages. Equipment: * NOVUS Airtower FT 20,000 * ECblue efficiency package * NOVUS particle sensor * NOVUS lighting package * Timer * Automatic filter cleaning * 3 filter stages * Total filter area 295 m² * Dust container 200 liters * Plug & Play, no piping required * Forklift attachments and crane eyes Technical data: * Airflow rate: approx. 20,000 m³/h * Motor power: 15 kW / 400 V / 50 Hz * Dimensions: approx. 2,066 x 1,756 x 3,643 mm * Weight: approx. 1,590 kg * Sound pressure level: < 75 dB(A) A guard was removed during the testing phase and has already been reordered. This will be professionally installed before delivery. Price: €27,900 net, negotiable, plus VAT. Lodpfxszfx Ris Akqohn Sale exclusively to businesses. Location: 48691 Vreden. Inspection possible by appointment. Loading can be arranged on-site.

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Ledoqttt Topfx Akqshn

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Lsdpfx Akj Adzhrsqshn Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Lhsdpfx Asuvgnqekqjn

Condition: good (used), Deckel FP1 milling machine with 3-axis Heidenhain digital display, fixed angular table, and SK 40 spindle mount. Accessories: counter supports, various collets. In good, operational condition. Can be demonstrated under power by arrangement. Lhjdpfxezy Hnlo Akqon

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Ledpfxeumcmqs Akqjhn

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” Ljdpfey Nfqmox Akqjhn With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.