Used Round Baler for sale (4,026)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced Lsdpfx Agezbxwievsrn • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), CATALOGUE NUMBER 8015 TECHNICAL DATA - Range of diameters for processed pins: 40-140mm - Max diameter of input material: 210mm - Min length of input material: 600mm - Max allowance for machining per side: 30mm - Fitted sleeve with a diameter of 100mm - Motor for driving the cutting head: 18.5kW - Feed: + forward/backward - Feed motor: 3.73kW In sequence: - Infeed channel - Toothed pulling rollers: 6 pcs - 4-knife cutting head - Smooth pulling rollers: 6 pcs - Dimensions (L/W/H): 2600x1200x1390mm - Weight: 1700kg ADVANTAGES - Polish production - DTR documentation available - Used turning machine, very good condition Net price: 49900 PLN Net price: 11881 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations) Lodpfx Agezcw R Rjvorn

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm Ljdpfx Aszcw Dksgvern - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Machine number: 140409 Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. The press has a second discharge chute. Ledpfx Agozbyf Isvorn Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: ready for operation (used), Year of construction: 2009, Well-maintained PRESTO HPK 50 BSK automatic horizontal baler in fully operational condition. The machine has been in continuous industrial use and has been regularly serviced and professionally maintained throughout its lifetime. It was recently dismantled from operation due to plant modifications and is ready for transport and immediate recommissioning. Suitable for baling: Cardboard (OCC) Paper Mixed recyclables Plastic films PET bottles Packaging waste The HPK 50 BSK is a compact and reliable industrial baler designed for medium to high throughput operations. Its large feed opening allows efficient loading by conveyor, wheel loader or excavator. The fully automatic wire tying system ensures consistent bale quality and low operating costs. The PRESTO HPK series is well known throughout Europe for durability, simple maintenance and reliable operation. Pressing force: 50 t Motor power: 22 kW Power requirement: 400 V / 80 A Feed opening: 1,250 x 1,050 mm Bale dimensions: 1,100 x 700 mm Bale weight: up to approx. 500 kg depending on material Cycle time: approx. 22 sec Throughput: up to 5–10 t/h depending on material density Lrodjzcdrnspfx Agvon Fully automatic 4-wire tying Machine dimensions: approx. 6,820 x 1,950 x 2,160 mm Machine weight: approx. 8.75 t

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Lodpfx Aozcc Rvjgvjrn Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, turntable diameter: 390 mm, bending angle (max.): 360 °, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Ljdpfsgqfp Hjx Agvjrn Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: used, Electric drive Cycle initiation via foot switch Various tools included in the scope of delivery: 1 x upper/lower blade with 4 mm radius 1 x upper/lower blade with 6 mm radius 1 x upper/lower blade with 7 mm radius 1 x upper/lower blade with 8 mm radius Lrjdsythzuspfx Agvsn 1 x upper/lower blade with 9 mm radius 1 x upper/lower blade with 15 mm radius (currently installed)

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request. Ljdpfozdpctox Agvsrn

Condition: good (used), Scharringhausen round bending machine Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lredpfxjimmb Is Agvjn Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Included documentation Movie available!

Condition: excellent (used), Year of construction: 2010, 4-axis PEISLER Type :RT-215 Year 2010 ( 3rd piece available ) Center height: 215 mm with power chuck Fabr.RÖHM Type:KFD-HS215/3 Fmax.48KN Nmax.3000/min Lrsdst Daxxjpfx Agvon with hydraulic connection for chuck and drive shaft on both sides, without motor and controller in very good condition. Quoted price is for one piece .

Condition: good (used), Year of construction: 1990, Round table, make PEISSLER PRT 500 DM 500 mm. Lrsdpfx Aovk D Sgogvsn Good condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Lsdpfx Aewuk Nrsgvern Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Ljdpfjvn I Hcex Agvern Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface Lodowb Scmjpfx Agvern • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Ledpfsid Al Nex Agvsrn Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness Lsdpfswfc S Tex Agvorn -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Year of construction: 2023, condition: new, Heavy-duty log cross conveyor 4-strand Length approx. 9 m Lrodpfxjdzx I Rs Agvjn Strand spacing: 1500 mm, 1800 mm, 2300 mm Height: 1500 mm

Condition: new, We offer the construction of year-round wooden houses, built with the highest quality materials and attention to every detail. Technical specifications of the presented model (3.20 m x 9.50 m): Lrsdpfxszdwf No Agvon Structure: certified C24 wood (Scandinavian spruce) Floor insulation: 20 cm of thermal insulation Roof insulation: 15 cm of thermal insulation Wall insulation: 10 cm of thermal insulation Full customization on request: Dimensions: We build to your specifications! The presented model is 3.20 m x 9.50 m, but we can implement any other design and size for you. Color scheme: You choose the exterior and interior colors, as well as the colors of the windows and doors. We use only professional, durable paints from the Tikkurila brand. 💰 Price: starting from 1000 € / m² I will be happy to provide all the details, individual quotes, and answers to your questions over the phone. Please feel free to contact me!

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Lsdpfomqi Akex Agvsrn

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL DATA - max diameter of processed dowels: 130mm - installed sleeve: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm Ledpfjy Uxarsx Agvjrn - knife head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed infeed rollers - 3-knife head - 3 smooth outfeed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – Made in Poland – 3-knife head – Used dowel lathe, in very good condition Net price: 32,900 PLN Net price: 7,830 EUR (conversion at 4.2 PLN/EUR) (Prices may vary with greater exchange rate fluctuations)

Year of construction: 2009, condition: new, Loop sling, round sling, lifting strap, load securing strap 2 tons, 2 x 4 meters (meter circumference) 750 pieces, package price Lrjdpfx Agjih N Hksven Multiple packages available Packaged on a pallet.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Briquette press Manufacturer: Weima Type: TH 800 S Year of manufacture: 11/2019 Briquette press for highly compressed, round briquettes Briquette diameter: 80 mm Control cabinet with Siemens Simatic PLC control system Lrjdpfx Aezcf Epsgvsn Main motor (hydraulics): 22 kW Pressure: 250 bar Voltage: 400 V, 50 Hz Current: 55 A Fuse rating: 63 A Weight: approx. 3000 kg

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights Lodpodzqn Djfx Agvsrn - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: like new (used), Two cabinets with 12 drawers: ejectors – round and flat. Price per item only €10. Lrjdpfexz Rx Dox Agvsn