Used Round Tenoner for sale (4,349)

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Godpfxeyddy Uo Aihouh

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Godpfszpw Hdex Aihouh Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Year of manufacture: 2005. Gedpfx Aiszxg Amohsuh Includes documentation. The machine is powered on for inspection.

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. Godpfsztckijx Aihjuh The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Gujdpfxjzuzpyj Aihoh Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: good (used), Year of construction: 1990, Length:2000mm Guedpfx Aszc Iw Usiheh Width:1500mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), working width: 2,500 mm, Gabbiani double-head panel squaring machine 3 + 3 working units Gsdpfx Aiszfvufjhsuh Maximum working width 2500 mm Overhauled and in working order

Condition: excellent (used), functionality: fully functional, Capasity 30 cm3. Flat steel 200 x 30mm (800mm diam) flat stell standing 100 x 18mm (800 mm diam) Guodszhmbuopfx Aihoh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Gjdez Ef N Aspfx Aiheuh Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Year of construction: 2016, Machine No. 14, Serial No. 238835, Arburg Selogica control system, clamping force 2,500 kN, screw diameter 45 mm, handling system, manufacturer Arburg, type Multilift Select, year of manufacture 2016, travel distances X/Y/Z 700 x 1,200 x 2,400 mm, safety enclosure, handling robot, manufacturer Kuka, type KR10R1100, year of manufacture 2016, serial no. FA2686, 2 conveyor belts, manufacturer Schuma, L/W approx. 2,000 x 800 mm. Gusdpjz H N H Ijfx Aihoh

Condition: good (used), 100.000L steel tank. Fire / drinking water Gsdpfx Aisdbllzshjuh underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control Godpfxsfu Swxe Aihsuh X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, - Capacity: 1070 x 5 mm - Electrically adjustable rear roller Gusdpfxjgg Nv Ss Aihsh - Electrically adjustable bottom roller (for material clamping) - Digital display for rear roller movement - Hardened rollers - Tapered rollers - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2024, - Capacity: 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Tapered rollers Gedpfx Aisgg Rbpohjuh - Brake motor - Foot switch - Emergency stop - Documentation - 400V

Condition: new, 3-Roll Round Bending Machine, Ostas ORM 1270 x 140 Technical specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 1270 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness for pre-bending 4.0 mm Roll length 1270 mm Roll diameter 140 mm Weight 1400 kg Dimensions L-W-H 2500 x 800 x 1100 mm Guodsfpmz Hspfx Aihoh Motor: 2.2 kW Equipment: Top and bottom rolls driven by electric motor Top roll can be swiveled out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking

Year of construction: 2026, condition: new, The Round Elbow Machine is designed for quick assembly of air ducts, namely segments of bends, transitions, and plugs. High quality hydraulic components have been used. Flanging and assembly operations are carried out at 2 independent workstations, and it allows two people work at the same time. T wisting and printing balls high abrasion resistance and toughness with high durability and compressive strength is 2379 cold work tool steel. Technical Data: Gedpfx Ajg S N Nijihsuh Diameter Range-125-1250mm Sheet Metal Thickness-0,5-1,5mm Roll forming Options-5-7,5-10mm 3 Set Power-4 kw Electricity-380V/3PH/50 HZ & 240V/3PH/60 HZ Air Pressure-6-8 bar Hydraulic Oil Level-90 lt Processed Sheet Metal Thickness (Coated)-0,5-1,5 Machine Dimensions-750(width)x900(height)x2800(length) Machine Weight-850 kg

Year of construction: 2007, condition: excellent (used), I sell the double end cutting and tenoning machine FRIULMAC IDRAMAT, Year 2007. Working width up to 2500mm Configuration left side / fix: Gusdoib A E Aopfx Aihsh 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 + 1 pcs. grooving saw aggregates front + back Configuration right side / moving: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 pc. special milling aggregate / 5,5 KW Material pressure feeding band from top Special construction, suitable also for sizing. Throughfeed machine. Siemens Simantic control panel. Very good condition. Available immediately.

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1570 x 130 Special equipment included in the price: Motorized adjustment of the lower roll Hardened rolls Motorized adjustment of the rear roll 2 x digital display Godpfx Aeiu Hvtjihsuh Sheet metal width 1570 mm Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1570 mm Smallest diameter 195 mm Roll diameter 130 mm Weight 1520 kg Dimensions L-W-H 3050 x 630 x 1020 mm Motor 2.2 kW Equipment: Top and bottom roll, electrically driven Top roll can be pivoted outwards Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Year of construction: 1996, condition: excellent (used), I sell the double end cutting and tenoning machine EGURKO ORTZA PDA 56/2. Working width 200 up to 3000mm Configuration left side / fix: 3 pcs. side tilting moulding aggregates Configuration right side / moving: 3 pcs. side tilting moulding aggregates Material pressure feeding band from top Throughfeed machine. Guedsizrf Nspfx Aihjh Very good condition. Available immediately. Assembled, ready to work immediately. Price for 1 pc. On stock 2 pcs. available.

Condition: as good as new (ex-display), Year of construction: 2001, I sell the automatic CNC working centre for BLOCK-HOUSE production AUER BL100. Gedpfx Aijrccakohjuh Year 2001. Input table / Max. Element length 9,00m Tenoning head up to dia.200mm / 4kW Horizontal milling up to dia.200mm / 4kW Vertical milling up to dia.200mm / 4kW Automatic feeding system AUER Austria BL100MS Programming Zebra Label-print TOS Svitavy PWM 45.11 End-cutting saw in the back Suitable for wooden house constructions! Available immediately.

Condition: new, Rollmak 3-Roll Round Bending Machine SME 110-10/5.5 Guodpfx Aiolu Epajhoh Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1050 mm Roll diameter 110 mm Smallest bending diameter 165 mm Weight 920 kg Dimensions L-W-H 2150 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Rollmak 3-Roll Round Bending Machine SME 140-20/4.5 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2050 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1550 kg Dimensions L-W-H 3150 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Top roller can be swiveled out Conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking Gujdpfx Ajlu Eumjihjh

Condition: new, Rollmak 3-Roll Round Bending Machine ST3 130-15/6 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1550 mm Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1550 mm Roll diameter 130 mm Gusdpfx Aijlu Evnehsh Smallest bending diameter 195 mm Weight 1650 kg Dimensions L-W-H 3250 x 850 x 1300 mm Motor: 3.0 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swiveled out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, cutting width (max.): 20 mm, type of input current: three-phase, total length: 750 mm, total width: 1,000 mm, total height: 1,150 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,150 mm, space requirement length: 750 mm, space requirement width: 1,000 mm, Bread slicing machine Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 slices/min. blades with high-quality Teflon special coating robust machine DGUV V3 tested – available only from us Gedpfxovkn Hzj Aihjuh connection: 400V, 16A-CEE plug used machine & SAB inspected + spare parts service Option: maintenance contract spare blades service package Many bread slicing machines in stock!

Condition: new, Ostas 3-Roll Round Bending Machine ORM 1070 x 110 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1070 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness for pre-bending 4.0 mm Roller length 1070 mm Roller diameter 110 mm Weight 1000 kg Dimensions L-W-H 2250 x 800 x 1100 mm Motor: 2.2 KW Equipment: Top and bottom rollers, electrically driven Top roller can be pivoted outwards Tapered bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel Godpfx Aiegkwhashsuh safety cable CE marking