Used Router Milling Machine for sale (65,443)

Condition: ready for operation (used), functionality: fully functional, Zayer milling machine, model 60BM, with a table of 2030mm x 700mm, featuring a dimension display, and a motorized ram. Longitudinal travel: 1,524 mm, ram travel: 712 mm, vertical travel: 560 mm, ISO 50, speeds: 24-1685 rpm, spindle motor power: 15 hp. The machine has been inspected. Approximate machine weight: 6,500 kg, in good condition. Dwodpfx Aozmp Inoi Eed

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 Dsdpfxs Agbype Ai Eewd >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 1970, Tool milling machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, including geometry report Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Travel ranges X/Y/Z 300 / 150 / 340 mm Spindle stroke 60 mm vertical Tool holder MK 4 Speed range 40 to 2,000 1/min Two-stage motor, gear stages Speed steps 16 speeds Feed 16 steps 10 to 500 mm/min Dwjdpfx Asz A Tn Iei Esd Drive power Two-stage motor approx. 1.0 / 1.4 kW Operating voltage 380 V / 50 Hz Total connected load approx. 1.9 kW Clamping surface 600 x 210 mm Max. table load approx. 150 kg Space requirement (W x H x D) approx. 1,100 x 1,000 x 1,500 mm Weight approx. 750 kg Equipment including: - Vertical milling head - Heidenhain 3-axis digital display - Automatic feed - Coolant system with overhauled pump - Equipment scope as shown in the picture Inquiry item: Transportation costs in an individual offer

Condition: used, total height: 1,900 mm, total width: 160 mm, total length: 2,000 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Documentation available: Yes - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 5.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 490 - B-axis rotation [°]: 360 - C-axis rotation [°]: 270 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO40 - Main spindle power [kW]: 3 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1510 - Options: Chip collection tray, External cooling, Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2000mm x 165mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dedpfx Aie Ahki So Ejwd

Condition: used, Year of construction: 2003, Universal tool milling machine Kunzmann Type/Model WF 4/3 Condition: Used Year of manufacture: 2003 Control system: Heidenhain TNC 124 Technical data: Travel ranges X/Y/Z axis: 400 x 350 x 400 mm Table size: 650 x 350 mm Max. table load: 250 kg Spindle mount: SK 40 Spindle speed: 0-4,000 rpm Spindle motor: approx. 5.5 kW Quill stroke: 60 mm Vertical milling head: swivels by +/-90° Feed rate X/Y/Z: up to 2,000 mm/min Rapid traverse X/Y: 5,000 mm/min Rapid traverse Z: 4,000 mm/min Total connected power: approx. 12 kVA Operating voltage: 400 V Weight: approx. 1,900 kg Dodpfxe Aifrwe Ai Eewd Item for inquiry: Transportation costs will be provided in a separate quote.

Condition: used, Year of construction: 1999, with CNC control, manufacturer: FIDIA, type: M 2, travel distances: X-axis: 4000 mm, Y-axis: 1000 mm, Z-axis: 1700 mm, with automatic tool changer with 10 tool positions, 2 pcs. clamping angles, manufacturer: MECOF, with 2nd exchangeable spindle HSK 50. Dodpfxs Af Nlue Ai Eowd

Condition: good (used), functionality: fully functional, FOR SALE: DECKEL FP1 Milling Machine Dwsdpfx Aie Af Au Ns Esd Technical specifications: • Model: FP1 (Serial number: 54212/08) • Machining travels: X = 300 mm | Y = 150 mm | Z = 340 mm • Spindle: SK 40 taper • Speeds: Mechanical adjustment via a circular selector on the front panel • Power supply: 400 V / Three-phase • Weight: Approximately 750 kg Included equipment: • VISOMAT 3-axis digital display on an articulated arm • Circular rotary dividing table mounted on the table • Articulated work lamp • Protective bellows for the slides, in excellent condition • Chip collection tray integrated into the machine frame Very clean used machine, slides in good condition, and ready for use.

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine - Vertical Dodpfx Aozq Hlfji Ejwd Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Technical Data: - X-travel: 300 mm - Y-travel: 300 mm - Z-travel: 400 mm - Speed range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Digital display Heidenhain Saddle travel range Saddle travel along X-axis 600 mm Saddle travel along Y-axis 400 mm Saddle travel along Z-axis 400 mm Clamping surfaces Vertical table 500x320 mm Permissible workpiece weight max. 500 kg Fixed swivel table 800x400 mm Permissible workpiece weight max. 400 kg Feed Feed rate (X and Y) 16-800 mm/min Feed rate (Z) 8-400 mm/min Rapid traverse (X and Y) 2000 mm/min Rapid traverse (Z) 1000 mm/min Horizontal milling spindle Tool holder SK 40 Mechanical speed steps 18 Speed range 63-3150 rpm Swiveling vertical milling head Tool holder SK 40 Quill travel 100 mm Swiveling range ± 90° Speed steps 18 Speed range 63-3150 rpm Machine dimensions Length 2210 mm Width 2155 mm Height 1910 mm Weight approx. 2200 kg Dwedpfs Ahw Hzox Ai Eod

Condition: good (used), functionality: fully functional, FOR SALE: HURON MU4 Milling Machine Features and Capabilities (HURON MU4): Dwsdo Af Atfepfx Ai Eed • Machining travels: X = 1,100 mm | Y = 700 mm | Z = 500 mm • Table dimensions: 1,430 x 460 mm (with T-slots) • Milling head: Genuine HURON universal head with double rotation swivel (vertical, horizontal, and all-angle milling) • Feeds: Automatic and rapid on all 3 axes • Power supply: 400 V / Three-phase • Weight: Approximately 3,800 kg Included Equipment: • Industrial clamping vice (installed on the table) • Electronic control panel for displaying dimensions • Complete coolant system and floor-mounted electrical cabinet Condition: • Used equipment in working condition, sold as is.

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Dedpfx Aioy N Du Dj Eswd Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school!! Technical specifications: >> Machine no. 1212 >> Swivel and tilting table Dedpe Afyy Hjfx Ai Eowd >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been performed. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 Dwodpfx Aie Agwvms Ejd >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm Dwedpfxe Ahzi Ne Ai Eod y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; -Pneumatic tool clamping; -Coolant system; -Work light; -Chip tray; -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: used, Year of construction: 1977, Technical details: Dwjdpfx Ajvc Awfoi Eod x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Optional accessories *

Condition: excellent (used), Catalog number 7248 TECHNICAL DATA - max. workpiece height 160mm - spindle working length 250mm - spindle diameter 40mm - max. tool diameter 220mm - worktable dimensions (length/width) 420x1010mm - motor 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter 180mm Dwedpfxo Af Iz Io Ai Ejd - dimensions (length/width/height) 1500x1010x1560mm - weight 689kg ADVANTAGES – Made in Germany – Used milling machine, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel - Operator platform - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm - Splash guard enclosure Djdpfszix Rwjx Ai Eswd - CE marking

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, table width: 400 mm, table length: 800 mm, overall weight: 5,300 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HURON VX8 NVU TECHNICAL SPECIFICATIONS: - Date of manufacture: November 2021 - Power-on hours: approx. 9 758 h - X-axis travel: 820 mm - Y-axis travel: 510 mm - Z-axis travel: 510 mm - CNC control: HEIDENHAIN TNC 620 - Max. spindle speed: 10 000 obr/min - Table dimensions: 800 × 400 mm - Tool magazine capacity: 24 tools - Chip conveyor Dedpfs Aifm Tjx Ai Eowd - EUROCOLD H2021P473 cooling unit - 3-jaw lathe chuck - 2 HILMA NC 160 machine vises - Machine weight: approx. 5 300 kg The machine is in very good technical condition, connected to power and available for inspection and testing on site by prior appointment. Professional loading is included in the price. Accessories, tools and clamping devices shown in the photos are included in the offer only if explicitly listed under equipment. Technical specifications are provided for reference only and may contain inaccuracies. The machine is subject to prior sale.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 9502, year of manufacture approx. 1978 >> Swivel-tilting rotary table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical and horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 Dwedpfx As Afy Ngsi Eod >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be easily moved. Most of the bellows are new. The previous owner installed a brake motor. An oil change was carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered up. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: Dwsdpfxo Afy Ele Ai Eod >> Machine no. 1399 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel ranges X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Dedpfx Aozfwm Nei Ejwd Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), CATALOGUE NUMBER: 6969 TECHNICAL DATA Circular saw: - max. saw blade diameter 300mm - spindle 30mm - max. cutting height 60mm - blade adjustable front/rear - motor 2.4kW Milling machine: Arbor: - spindle diameter 40mm - spindle working height 190mm - spindle locking - max. milling cutter diameter 360mm - motor 7.5kW - 2 types of rotation speeds - material clamping - side carriage adjustable up/down, front/rear - angle guide Dwjdpszw Dgmjfx Ai Ejd - retractable support from the table - manual carriage feed - dust extraction nozzle diameter 80mm, 160mm - dimensions L/W/H 1910x1960x1800mm, - weight 830kg – Polish production – DTR documentation – upper control panel – used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, High-precision drilling and milling machine Fehlmann Model Picomax 56TOP Heidenhain TNC 620, excellent condition, CE compliant!! Technical data: >> Year of manufacture: 2014, Machine No. 14214621 >> Travel ranges X/Y/Z: 500/400/400 mm >> Distance between table and spindle nose: 120-520 mm >> Clamping area (L x W): 908 x 480 mm >> Spindle speed range: 50-12000 rpm >> Drive power: 9.5 kW Dwodpfxj Agarue Ai Esd >> Tool magazine: Number of positions: 20 >> Footprint (W x D x H): 1700 x 1900 x 2500 mm >> Weight approx. 3000 kg About the machine: The top-of-the-line machine for manual and CNC operation with an innovative Fehlmann operating concept: user-friendly, fast, and economical. The precision milling and drilling machine PICOMAX 56 TOP (Touch Or Program™) is available with a completely new operating concept that combines 3-axis CNC operation with manual operation via drilling lever and handwheels. Specifically designed to quickly, safely, and efficiently perform milling, drilling, and threading operations on individual parts without time-consuming programming. Even after a short training period, the PICOMAX 56 TOP milling machine can be used extremely economically by skilled personnel, even without programming knowledge. Even in its basic configuration, the FEHLMANN milling machine 'Made in Switzerland' offers various features of a modern, high-performance milling machine, such as: fully digital CNC Heidenhain control TNC 620, a Fehlmann-specific, liquid-cooled, and high-torque motor spindle for universal milling up to 12,000 rpm, as well as Z/S-interpolated threading, 3D milling, and turning. The tool holders and accessories (see pictures) are included. Absolutely excellent condition. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: refurbished (used), Year of construction: 1976,

Condition: excellent (used), Year of construction: 2015, Description to follow! Dodpo Afzr Tofx Ai Eswd