Used Run By Pasteurisator for sale (7,818)

Condition: used, Q 33.0 m³/h P 15,0 kW Cjdpoikwapsfx Acpjrh max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: good (used), Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm Cedpjb Ix Niefx Acpjrh -Weight: 84 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Voltage: 380-415 V 690 W -Max. flow rate: 2 m³/h -max. H: 36/46 m -Max. pressure: 6 bar -Maximum temperature: 90 °C -Price: per piece -Quantity: 2 pieces -Dimensions: 400/143/H203 mm Crodpfx Acjd Tk Sqepoh -Weight: 12.4 kg

Condition: ready for operation (used), Grundfos MG 112 MS 2-28 FT 136-C three-phase motor SN 1100029148, used, minor signs of wear, 100% functional, scope of delivery as per photos Codpfx Aceqyq Nqopjrh

Condition: excellent (used), 150 m (approx. 492 ft) of Jungheinrich Type MPB pallet racking Used, very good condition, see pictures Height: 3.9 m Depth: 110 cm, blue Field load: 8.4 tons Beam length: 2.7 m, yellow Beams with load capacity/bay: 2400 kg Negotiable price: €9,780.00 net ex-warehouse The offer includes: + 52 units of frames, pre-assembled, depth 110 cm, height 3.9 m + 204 units of beams, length 2.8 m, 2400 kg load capacity/bay + 408 units of locking devices + 208 units of concrete anchors Crjdpfop Dunfsx Acpeh Load capacity signs, documents, etc. are included. Further accessories can be found in the accessories catalog. The goods are in stock. Transport and installation are available upon request. Inspection is possible at any time by appointment. Further information upon request. We constantly have over 5000 m (approx. 16,404 ft) of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT ex-warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking are immediately available • 20,000 m² of storage platforms & steel structures are immediately available • 30–50 semi-trailer truckloads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF ACTIVITY: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of goods, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), machine/vehicle number: CR8-40, Vertical multistage centrifugal pump from the Grundfos brand. Checked. Good, used condition, fully functional. Cjdsqk U Tqjpfx Acpsrh Please contact us if you have any further questions. Collection can be organized at any time. Shipping on request.

Condition: used, 5,000 linear meters of structural profiles, C-shape Used, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 30 kg Negotiable price: €3.90 net/linear meter, ex warehouse Available individually or in packages One package consists of 40 pieces – approx. 186.8 linear meters Goods are in stock. Transport possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking systems from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking systems, used & new Description: Are you looking for high-quality warehouse racking systems to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking systems available for immediate delivery Codpfjulwmcox Acpsrh • 20,000 m² of mezzanine floors & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi Cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, worry-free package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking/heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h Crodpfjb A Ni Njx Acpoh -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Cedszqtb Topfx Acpjrh

Condition: refurbished (used), Year of construction: 1998, overall weight: 33,000 kg, working width: 4,300 mm, HACO hydraulic press brake, Pressmaster 43230 model 4.3 m x 230 tons Retrofit with new Easybend 2DT touch-screen CNC control Cedpfx Acjzqabasporh X-axis back gauge with ball screw Manual crowning table 2 adjustable front supports Machine designed for standard European tooling

Condition: new, clear span: 2,700 mm, total length: 2,780 mm, The scope of delivery includes: 1x Push-through safety device, new Credpfx Acszu Andopeh Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Consisting of EACH: 1 x Rectangular tube, 2nd choice (new goods) Material color: RAL 5010 blue Dimensions: 50x40x2.0 mm Weight: 2.64 kg | per meter Borehole diameter: 9 mm Tube length: 2,780 mm Center-to-center distance: 2,740 mm 2x Corner angle bracket, new Material color: sendzimir galvanized Design: Mounting bracket Profile dimensions: 155 x 120 mm Head plate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Screws, M6 2 x Nuts 2 x Washers You can also request the following additional lengths: (For field width:) 1,350 mm = €18.00 plus 19% VAT 1,800 mm = €23.00 plus 19% VAT 1,900 mm = €25.00 plus 19% VAT 2,000 mm = €26.00 plus 19% VAT 2,100 mm = €27.00 plus 19% VAT 2,200 mm = €28.00 plus 19% VAT 2,300 mm = €29.00 plus 19% VAT 2,400 mm = €31.00 plus 19% VAT 2,500 mm = €32.00 plus 19% VAT 2,600 mm = €33.00 plus 19% VAT 2,800 mm = €36.00 plus 19% VAT 2,900 mm = €37.00 plus 19% VAT 3,000 mm = €38.00 plus 19% VAT 3,100 mm = €39.00 plus 19% VAT General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Operating pressure: 0,9 bar Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control Crjdpfx Aoztya Uscpjh

Condition: used, Year of construction: 1986, A vertical stainless steel tank with multiple cooling zones and various fittings. Most recently used as a fermentation tank for beer. Additional title: Coolable tank Capacity approx.: 11600 l Width: approx. 2,3 m Height: approx. 4,1 m Material: Stainless steel Csdezty E Repfx Acpsrh Position: vertical Base construction: on 4 feets Features: manhole; cooling jackets; spunging apparatus; sampling valve

Condition: excellent (used), Year of construction: 2009, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: SL-25T, Marunaka SL 25 T, with conveyor belt + knife sharpening machine, price and further details available via email. Crodpfx Aozruhwecpjh

Condition: new, clear span: 2,700 mm, total length: 2,760 mm, The scope of delivery includes: 1x Push-through protection, new Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Steel grade: S235 | S275 Consisting of EACH: 1 x Square tube, new Material color: hot-dip galvanized Dimensions: 50x50x2.0 mm Weight: 3.26 kg | per meter Tube length: approx. 2,760 mm 2x Angle bracket, new Material color: sendzimir galvanized Design: Holding device Profile dimensions: 155 x 120 mm Headplate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Drill screws, self-tapping 25 mm You can also request the following lengths: (For field width:) 1,350 mm = 19.00 € plus 19% VAT 1,800 mm = 26.00 € plus 19% VAT 1,900 mm = 27.00 € plus 19% VAT 2,000 mm = 29.00 € plus 19% VAT 2,100 mm = 30.00 € plus 19% VAT 2,200 mm = 31.00 € plus 19% VAT 2,300 mm = 33.00 € plus 19% VAT 2,400 mm = 34.00 € plus 19% VAT 2,500 mm = 36.00 € plus 19% VAT 2,600 mm = 37.00 € plus 19% VAT 2,800 mm = 40.00 € plus 19% VAT 2,900 mm = 41.00 € plus 19% VAT 3,000 mm = 42.00 € plus 19% VAT 3,100 mm = 44.00 € plus 19% VAT 3,300 mm = 47.00 € plus 19% VAT 3,600 mm = 51.00 € plus 19% VAT 3,900 mm = 55.00 € plus 19% VAT 4,300 mm = 61.00 € plus 19% VAT Codpfxszu Stce Acpjrh General information about the article: This article is only offered for collection. Any additional transport or shipment of this article will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, 25-Meter SLP Pallet Racking System Spanning a total length of approximately 25 meters, the system comprises 9 bays, each with a clear bay width of 2,700 mm. This corresponds exactly to the standard width required to store three Euro pallets side-by-side. Special Rack Depth: The upright depth of 1,100 mm is the standard for longitudinal Euro pallet storage. Thanks to the extended upright depth of 1,700 mm and the use of deep grating decks (1,700 x 890 mm), this system is ideally suited for non-standard dimensions, transverse storage, or order picking operations. Capacity & Load Ratings: With 6 levels (including the floor level), the system accommodates a total of 162 pallets. The maximum bay load capacity of 3,000 kg allows for a heavy load of up to 1,000 kg per pallet. The maximum total bay load is 15,000 kg. Technical specifications at a glance: Manufacturer: SLP (Saar-Lager- und Profiltechnik) Type: SL25 Total length of rack run: approx. 25.15 meters (9 bays at 2,700 mm + upright width) Rack height: 7,150 mm Total rack depth: 1,700 mm (upright depth 1,100 mm + 600 mm upright extension) Clear bay width: 2,700 mm (perfect for 3 Euro pallets per level) Number of bays: 9 bays Number of storage levels: 6 levels (5 beam levels + floor level) Total pallet spaces: 162 spaces Crodpfjzrlxmjx Acpsh Max. bay load (per level): 3,000 kg (with evenly distributed load) Max. total bay load: 15,000 kg Scope of delivery: 10 x SLP pallet rack upright frames, blue, 7150 x 1100 mm 10 x SLP pallet rack upright frames, blue, 7150 x 600 mm 135 x Mesh deck panels, 1700 x 890 mm 42 x SLP pallet rack beams, orange, 2700 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (compliant with DIN EN 15635) Safety is a legal requirement. We conduct the mandatory annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: ZN0012, operating hours: 317 h, EVERUN ER2500T – Telescopic Wheel Loader The ER2500T is a versatile 2.5-ton telescopic wheel loader designed for use in agriculture, construction, and material handling operations. It combines the benefits of a compact wheel loader with the extended reach provided by a telescopic boom, making it ideal for loading, stacking, and transporting materials in confined or demanding conditions. Key Features: - Rated Load Capacity: 2,500 kg (2.5 tons) - Engine Power: 53 kW (approx. 71 hp), available in Euro 3 / Euro 5 / EPA Tier 4 compliant versions - Bucket Capacity: 0.67 m³ (standard bucket) - Maximum Lifting Height: approx. 4.5 m (depending on attachment) - Dumping Reach: approx. 1.12 m - Operating Weight: approx. 5,300 kg - Dimensions (L × W × H): approx. 5,755 × 1,870 × 2,740 mm - Maximum Travel Speed: up to 21 km/h - Steering & Frame: articulated oscillating frame for enhanced maneuverability and stability on uneven terrain Crjdpfx Aexg Nadjcpeh - Hydraulics: working pressure approx. 20 MPa, delivers fast response and efficient control - Quick Hitch System: hydraulic quick coupler compatible with a wide range of attachments (bucket, pallet forks, bale grabber, etc.)

Condition: used, Year of construction: 2019, Overview Set of three cylindro-conical fermentation tanks built by Shandong Tiantai in 2019 - two of 1,000 litres and one of 7 BBL (approx. 820 litres). All three vessels are built in stainless steel SS304, rated for 4-5 bar working pressure and fitted with a cooling jacket with glycol inlet and outlet, a level gauge, an inward-opening side manway and a bottom outlet valve. The tanks stand on welded legs and are still installed at the site in Spain, where they can be viewed by appointment. A compact fermentation block for a craft brewery adding or replacing tank capacity. Technical data - Year of manufacture: 2019 - Units: 3 tanks - 2 x 1,000 L and 1 x 7 BBL (approx. 820 L) - Dimensions (approx.): Ø1210 x H2550 mm (1,000 L tanks), Ø1060 x H2550 mm (7 BBL tank) - Material: stainless steel SS304 - Design: cylindro-conical, isobaric pressure vessels on welded legs - Working pressure: 4-5 bar - Cooling: cooling jacket on every tank, glycol inlet and outlet Credoz Atq Sjpfx Acpjh - Fittings: level gauge, inward-opening side manway, bottom outlet valve Scope of Delivery - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 1,000 L | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 - Fermentation tank | Shandong Tiantai | 7 BBL (approx. 820 L) | cylindro-conical, SS304, cooling jacket with glycol inlet and outlet, level gauge, 4-5 bar | 2019 Condition Used, still installed at the current site. Viewing possible by appointment. Availability Immediately available.

Condition: used, Year of construction: 1999, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 180 mm, table width: 4,000 mm, overall weight: 16,000 kg, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Codpfx Aezzknrscpsrh Serial number: HFBO22040H991018 Bending length: 4,000 mm Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Number of phases: 3 Machine weight: 16,000 kg Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. The Package Includes: Cedpfx Acez Ahmbepsrh 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse.

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, Nova Gas Industry – Nitrogen 5.0 at an Unbeatable Price Nova Gas Industry offers modern and cost-effective solutions for on-site production of Nitrogen 5.0 and customized gas mixtures. Our systems combine the highest gas quality with maximum operational efficiency, providing an outstanding price-performance ratio. With more than 200 successfully installed systems across Europe and Asia, we have extensive experience in the design, engineering, and implementation of nitrogen generation systems for a wide range of industrial applications. Our systems are built with high-quality components, robust engineering, and a maintenance-friendly design. This helps reduce maintenance requirements and ensures high system availability for many years. Another key advantage is energy efficiency. Thanks to an optimized air factor and modern PSA technology, nitrogen can be produced reliably and economically directly at the customer’s site. This significantly reduces dependence on external gas deliveries and the associated transportation, logistics, and storage costs. An intelligent monitoring system enables continuous monitoring of all important operating parameters. System status, gas purity, pressure, and other relevant process data can be monitored at any time. This keeps your nitrogen production under control and allows you to respond quickly to any deviations. Every system is individually designed according to the customer’s requirements – from gas capacity and purity to operating pressure and specific operating conditions. Nitrogen 5.0 or Gas Mixtures – Maximum Quality, Minimum Operating Costs Nova Gas Industry provides high-purity Nitrogen 5.0 as well as customized gas mixture solutions for demanding industrial applications, particularly in laser cutting, metal processing, electronics, food processing, and manufacturing. Through energy-efficient system design and modern technologies, significant energy savings can be achieved depending on the application and system configuration. Our customers benefit from: Crodsxrcaujpfx Acpsh * High-purity Nitrogen up to 99.999% * Low energy consumption * Maintenance-friendly system design * High system availability * Customized engineering and project solutions * Attractive investment and operating costs Nova Gas Industry – More than 200 successfully installed systems in Europe and Asia. Nitrogen 5.0 and gas mixture solutions – reliable, efficient, and economical.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Codpfexmuzmox Acpsrh Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Shipping by freight carrier or collection

Condition: ready for operation (used), Tokheim gas station POS system designed for 16 pumps, currency display in DM, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Cjdpfx Aez Ac Umscpsrh

Condition: new, Vogel MFE5-KW3-S20+29E central lubrication system, unused, 100% functional, scope of delivery as per photos Crsdpfxjz Adhbo Acpeh

Condition: ready for operation (used), Vogel MFE5-KW6-S24 central lubrication / lubrication system, used, in good condition, 100% functional, delivery as per photos. Credpfx Ajz Adhnscpsh