Used Run Machine for sale (90,379)

Condition: used, Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 -Metal case with: accessories see photo Fsdpfx Agsd Tgaqoropb -Dimensions: 510/410/H210 mm -Weight: 19.5 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Used Mailmaster, originally supplied by Nodema to the customer. The machine has been inspected by Nodema and is functional. Machine is supplied without the feeder. A video is available to demonstrate the machine in operation, or it can, of course, be viewed in Weesp. Fedpfxexc Erzj Agropb

Condition: used, Year of construction: 2010, weight of the machine ca. 0,2 t Fpodpewr Etyefx Agrob

Condition: new, Case erectors  Igluetech/Brunel Engineering Services RSE 5 pieces Fpjdpsvu Sriofx Agrob Price per piece

Condition: like new (used), Year of construction: 1998, functionality: fully functional, SCHEER TW 4-2 Stair Stringer Milling Machine + Router HM 18E Fjdoxbt Ubopfx Agrepb Everything is in excellent optical and technical condition, like new Fully functional The device comes from a hobby carpenter and has therefore seen very little use, still like new You can start working with it immediately All equipment is from year of manufacture 1998 All are professional-grade machines for commercial use—no DIY store junk SCHEER TW 4-2 Stair Stringer Milling Machine Allows you to mill steps and risers very precisely and accurately Curved joint surfaces can even be machined using the handwheel Equipped with hardened guide shafts, on which the cross support with router is mounted Features ball bearing guides, making the unit very easy, precise, and safe to operate Can be securely clamped to stringers with 2 quick-release clamps Cross support features 2 stops each for both longitudinal and transverse directions Includes 2 angle stops Includes manual Milling travel: 750 mm longitudinal, 75 mm transverse SCHEER HM 18E Router Very good condition, almost no signs of use Extremely robust thanks to the triple-bearing router spindle Excellent concentricity and flawless milling results Precise column guidance and torsion-resistant router table Constant speed even under high loads High-performance motor ensuring minimal fatigue Long service life due to soft start (full-wave electronics) Bearings are in good condition The machine is suitable for the toughest milling operations in continuous use Good visibility of the cutter shaft; chips are blown away by a powerful fan A wide range of accessories are available for grooving, rebating, dowelling, dovetailing, etc. 220V, 2000W Speed adjustable from 10,000 to 18,000 rpm Fully functional With M16 female spindle (adapters and other fittings can be ordered separately) Includes 30mm guide ring and extraction hood

Condition: used, Maximum grinding length: 1000 mm Maximum wheel diameter: 320 mm Bore: 30 mm Manufacturer: TOS Fedpfx Agev Taaferspb

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Fjdpfx Ajr Dd H Segropb

Condition: used, Year of construction: 2006, functionality: fully functional, BVM Brunner 8030 Fjdpfx Ajt Euuwogropb

Year of construction: 2004, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. Fjdpokkcppefx Agrepb The machine can be demonstrated with power.

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. No guarantee for technical specifications. Fodpfow E Imiex Agrepb The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine.

Condition: like new (used), Year of construction: 2025, We will overhaul your existing Karstens and Bahmüller brand cylindrical grinding machine. The overhaul for Bahmüller and Karstens cylindrical grinding machines includes the following: 1. Housing/full space paneling new paint in RAL 7035, RAL 7011 new polycarbonate safety screen 10 mm new bearings for workpiece change door 2. Grinding headstock complete cleaning and painting check bearings, grind in plain bearings if necessary, replace if necessary check and clean the lubrication system revise the grinding spindle new coolant hoses, taps and KM nozzles made of aluminum install new belts 3. Tailstock complete cleaning and painting revise the quill check bearings, grind in plain bearings if necessary, replace if necessary disassembly and cleaning of the fine adjustment, replace any defective parts if necessary 4. Workpiece headstock complete cleaning and painting check bearings, replace if necessary check and clean the Lubrication system Revision of the workpiece spindle Install new belts 5. Hydraulics Complete cleaning and painting Storage of the hydraulic motor Revision of the pump, replace if necessary Complete renewal of the hoses Filter replacement Hydraulic plan 6. Pneumatics New maintenance unit New sealing air unit for length measuring systems New pneumatic lines/connectors/distributors and small parts Pneumatic plan 7. Lubrication for spindles Complete cleaning and painting Storage of the lubrication motor Revision of the pump, replace if necessary Check and clean the lubrication system Check and renew the lubrication monitoring if necessary 8. Central lubrication Complete cleaning and painting Storage of the lubrication motor Revision of the pump, replace if necessary Check and clean the lubrication system Check and renew the lubrication monitoring if necessary 9. Machine bed Completely clean inside and out Sand down and repaint V- and re-scrape and measure flat tracks Installation of a new control panel (rotatable) 10. X, Z axis New bearings on the X axis New ball screws New axial bearings Surface grinding, scraping if necessary Revision of the coarse adjustment of the X axis 11. Geometry Grinding and adjusting the complete geometry on the Grinding headstock, workpiece headstock, tailstock, X and Z axis Creation of a geometric protocol 12. Electrical system Construction of a new Rittal control cabinet with Siemens components, contactors, motor protection switches, Finder relays, Siemens drives, NCU, supply, Siemens PLC, etc. if necessary MPM, Jenoptik and other optional control devices Creation of a new E-Plan 8 circuit diagram Completely new cabling with PUR cables New control devices, switches, buttons (Siemens, Eaton) 13. CNC control Siemens control SINUMERIK ONE Siemens axis drives and frequency converters with CU Siemens asynchronous motor (grinding spindle) Siemens synchronous motors in X, Z, workpiece spindle Fsdpsvrdxijfx Agropb 14. Length measuring systems absolute length measuring systems Heidenhain 15. Other CE marking and protocol Risk assessment Siemens Safety with acceptance protocol new operating instructions and supplier documents in paper or digital form Noise protocol VDE protocol Control version also possible with Fanuc 0i TF Plus.

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. Fpsdpfxem Ux Tij Agrsb The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: ready for operation (used), Year of construction: 2019, Product: round 2kg bucket for mozzarella with handle and snap-on lid, throughput: 1600-1800 buckets/h, bucket dimensions: 175x131mm, connected load: 7kW, compressed air connection: 6bar, length: 2060mm, width: 2060mm, height: 3200mm, weight: approx. 4t. Double-lane, includes cup setter, cup control, free space for the installation of a multi-head weigher, rag dosing, CIP design, inverted lid station, push-on station, lifting/pushing-off, discharge conveyor, process control, central lubrication, drainage channels and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine did not run much. Fpjdpfowbpyvsx Agrob

Condition: ready for operation (used), Year of construction: 2004, Professional packaging machine of a renowned European manufacturer for tape width up to 50 mm. Maximum carton dimensions cirka: width 500 mm x height 500 mm; length unlimited... Fjdsgvzrgopfx Agrspb -No adjustments required for different carton formats. -Top and bottom closure on both sides. -Transport drive on the side. -Pressure for automatic width and height adjustment infinitely variable. -The working height of the machine is adjustable. -Capacity approx. 800 cartons per hour. -Transport speed approx. 20 m / min. -400 V / 50 Hz. The machine can be demonstrated under power.

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. No guarantee for technical specifications. The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine. Fsdpfx Agjwr Apferjpb

Condition: new, Year of construction: 2025, We are your competent and experienced partner when it comes to spare parts supply for Karstens and Bahmüller cylindrical grinding machines with the best price/performance ratio! Our spare parts supply includes electrical and mechanical components. We look forward to your inquiry and will deal with your request as quickly as possible. PS: We are happy to try to undercut the offer of another supplier, an inquiry will be worthwhile. Spare parts such as: - Ball screws - Spare parts for your assemblies such as tailstock, workpiece headstock, grinding headstock - Control exchange - Measuring systems (Heidenhain) - Tailstock quills - Bellows Fpjdpjvq Nxfjfx Agrsb - Grinding wheel flanges and much more.

Condition: like new (used), Year of construction: 2024, K11-1000 cylindrical grinding machine Also available in grinding length 650mm Make Karstens Technical data: Center width: 1100 mm Center height: 180 mm / (250 mm = option) Workpiece weight: 100 kg flying, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manual, (up to 2500 N possible, adjustable = option) Table inclination: 10 degrees Feed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 KW / (5.5 KW = option) Stepless speed adjustment of the grinding wheel with potentiometer Internal grinding spindle motor: 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor 1.5 KW Lubrication motor 0.1 KW Hydraulic tank 80 liters Machine weight: Net 3800 kg Infeed drive via DC motor Air cushion-supported quick adjustment of the grinding headstock for quick and safe approach to the sanding position. Fedpstudipjfx Agrepb Separate drive for the spindles for external and internal internal grinding. Fully automatic work sequence, infeed movement via wind rose switch: Rapid feed, rapid return, sanding mode, infeed stop, mym infeed. Automatic longitudinal sanding cycle Central coolant supply for all grinding points Workhead with infinitely variable drive with traveling and lockable spindle. Digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge-cut grinding, input for the return, infeed amounts, feeds, burnout times, empty strokes, compatible with the old old Karstens infeed control, with colored Siemens touch panel comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: as good as new (ex-display), Year of construction: 2024, GP CNC-1000 cylindrical grinding machine Also available in grinding length 650mm and 1500mm Make Karstens Technical data: Center width: GP CNC 1000: 1000mm Center height: 180 mm optionally other center height possible Max. Workpiece weight between centers: 300 kg Max. Workpiece weight on the fly including clamping device: 100 kg Workpiece headstock: MK 4, optionally other mounting cone possible Grinding wheel diameter with electrical or mechanical mechanical B-axis up to 500 mm; 600 mm diameter only for version Grinding machine with one grinding wheel Wheel arrangement: left for straight stitching machine, right for angled stitching machine 30 degrees Total connected load: approx. 30 KW Machine weight: approx. 4400 kg Basic equipment of the machine: Axes: X-, Z-, C-axis Grinding headstock: Asynchronous motor 7.5 KW, optionally higher motor power possible Constant grinding wheel peripheral speed: up to 50 m/s, preselectable cutting speed, automatic readjustment after dressing readjustment after dressing Workhead: with Siemens servo motor 2.2 KW, Speed range: 0-560 rpm CNC control: Siemens 840Dsl Software modules included as standard: 1) External grooving 3) External longitudinal grinding 4) Internal longitudinal grinding 5) External surface grinding 6) Face grinding inside Fpjdpfx Aott Rtzjgreb 7) Inclined grooving 8) Wheel magazine for 8 wheels Further optional modules: Oscillating, phases, external and internal taper grinding Axis drives: Siemens Servo Full enclosure with generous workpiece workpiece change door and maintenance door 2-color paint finish CE comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: refurbished (used), Your competent service partner for overhauling assemblies! Fpodpfx Ajuu Enaegrob Our service includes the overhaul of assemblies such as workhead, grinding headstock and tailstock of the Karstens and Bahmüller brands. Our service also includes the repair of the friction gear of Karstens workpiece headstocks. Cylindrical grinding machines are too heavy and too large to be easily transported. Their individual assemblies can usually be easily dismantled and shipped by a forwarding agent. We can dismantle, clean and measure these assemblies and replace parts. Or they can be upgraded and expanded with new technology. After completion, the assemblies are then sent back and the cylindrical grinding machine can resume its work after assembly.

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/s total power requirement 3,0 kW weight of the machine ca. 70 kg dimensions of the machine ca. 610 x 944 x 1419 mm Mobile belt sander PASOVEC 75 RUNNER Fodpfxok Uqg Ss Agrepb Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Low running costs

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine Fpjdpfeb A I Utjx Agreb -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg

Condition: new, AL-KO POWER UNIT 250 P - Exhibition unit - Integrated pre-separator, integrated automatic extinguishing system ----- Technical Data ----- Extraction nozzle Ø: 250 mm, nominal airflow: 3,534 m³/h, max. airflow: 4,900 m³/h, max. negative pressure: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 liters, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - new exhibition machine - Fpedpfx Ajwu Hatsgreb

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece Fedpjd Aqtvefx Agrspb -Dimensions: 450/110/H300 mm -Weight: 12 kg

Condition: good (used), Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 85 by 120 mm 25 mm high Fpedpfec Ih Tvox Agrsb -Drawing with the photos -Dimensions: 235/100/H270 mm -Weight: 15.5 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos -Number: 2x counter bearings available Fodpfx Aoc N Dqasgrjpb -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg