Used Sales Counter for sale (24,774)

Condition: used, Year of construction: 2004, operating hours: 153,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Gjdsy Ehdnjpfx Amyebl Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE Gbedpfx Amjy Ehdbjyel - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Width: 900–1260 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal cuts: 5 • Longitudinal trimming units: 2 • Minimum part width: 160 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations Godpfjy N U Rcjx Amyobl • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) (alternative: 3500 kg) • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 Gbjdpfoy N Spcox Amyol • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Condition: Currently stopped/not in production; reported functional; available for inspection by appointment • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 230 mm, travel distance Z-axis: 520 mm, overall weight: 4,100 kg, number of axes: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Foot pedal included • Automatic bar feeder interface likely installed • Tooling and included holders • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for counter spindle machining • 1x shared output for both spindles • 2x special double boring bar holders (bore Ø20 mm) • Prepared for Schunk TendoTurn DSE hydraulic clamping accessories (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with Ø25 mm and Ø32 mm bores • Accessories for direct mounting of square shank tools on turret • Collet holders • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 • Suitable for BA and BD type collets size 52 • For main and counter spindle use • Electrical data • Voltage: 200 V • Frequency: 50 Hz • Full load current: 116 A • Spindle motor current rating: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported functional before removal • Available for inspection Additional equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: Seller states compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never worked with this lathe previously • Condition: Reported functional Godoy N Shljpfx Amyebl Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 500 mm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details. • CNC: OSP U100L • Max turning diameter: 340 mm • Max turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increment) • Rapid feed: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm Gjdpfx Amsy N Sabsyobl • Live tooling: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blow • Turning tool holder kit • 4 radial live tools • 4 axial live tools Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools Yes

Condition: used, overall weight: 1,780 kg, axle configuration: 1 axle, first registration: 11/2022, loading space length: 4,300 mm, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2022, GW25RS33991 Gbodpfxexy Dmrj Amysl Sales trailer for chilled products, circulating air refrigerated display counter. Counter internal dimensions: 4,290 x 800 mm, water boiler, sink, bag shelf, base cabinets, fuse box, 220 V sockets, and much more. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,542 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 570 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 21i-T, number of axes: 3, This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details. • X-axis travel: max. 570 mm (over bed) / 420 mm (over slide) Gsdpfx Aey Nynyemyebl • Voltage: 400 V • Frequency: 50 Hz • Power capacity: 44 kVA • Rated current: 64 A • Main fuse: 80 A • Control voltage: 230 V (AC) / 244 V (DC) • Working hours: 22,542 hours • Feed time: 8 hours 4 minutes • Turret: 12-position turret • Tooling capability: driven tools; C-axis displayed on screen Additional equipment • 3-jaw chuck • Chip conveyor • Coolant system • Workspace lighting • Optional: Tool Holder Package • Optional: Schunk Rota NCD 210-66 three-jaw chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, mileage: 153,459 km, power: 74 kW (100.61 HP), first registration: 07/2006, fuel type: diesel, overall weight: 2,638 kg, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro3, number of seats: 3, total length: 4,834 mm, total width: 1,974 mm, total height: 2,150 mm, Errors and prior sale excepted! Internal number: Customer order ----EQUIPMENT - Tow bar - Audio system 4000 - Front electric windows - Radio preparation package/2 speakers Godpfx Amey Rcazsysbl - 5-speed gearbox - Electronic ABS - Driver's airbag - Manually adjustable exterior mirrors (2) - Roof package - Electronic differential lock - Rear double-wing doors/180° (with window) - Rev counter - Third brake light - Windows: Fixed window, 1st row left - Windows: Fixed window, 1st row right - Heated rear window - Headrests (2) - Sliding door: Sliding door, right - Half-height side wall cladding - Power steering - Seats: Driver and passenger vari-seat - Recirculation function - Immobilizer - Wiper-washer system ... and much more. ---- The vehicle is offered in unprepared condition! Nationwide delivery available at an additional cost. Errors and prior sale excepted. We are happy to take your vehicle in part exchange. Financing/leasing also possible with no down payment! Any questions? We are happy to advise you!

Condition: used, 01. Product to be filled Gedpfx Amsvgt Upsyebl “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Gbsdpfx Ajy N Tpkemysl Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U Gbodpjy Nmi Dofx Amyjl • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details. • Control: Siemens Sinumerik 810D with Weiler D1 user software Gbodpfx Amsy Nlvcjyel • Display: 12.1-inch TFT color flat screen • Operating voltage: 400 V • Control voltage: 24 V • Connected load: 14 kW • Nominal current: 26 A • Frequency: 50 Hz • Main fuses: 35 A • Coolant unit: 30 l/min at 0.4 bar • Tool holder: Multifix quick-change size B • Features: Teach-in functions; graphic-supported contour programming; V-24 interface; electronic handwheel for manual contour following Additional equipment • Included accessories: 1 change holder; fixed center point; spindle plug; key set; manuals; chip protection wall; movable splash guard; chuck guard with limit switch monitoring • Optional equipment included: Fixed steady rest with roller jaws (12–150 mm); adjustable hollow spindle stop; lever-operated collet chuck for DIN 6343-48 (173E) Technical Specification Counter Spindle No Driven Tools No

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,500 kg, total width: 750 mm, total height: 1,320 mm, pressing force: 2 t, product length (max.): 5,400 mm, number of axes: 3, This 3-axis WAFIOS BER-35 tube bending machine was manufactured in 2008. It is CE marked and has completed safety-technical approval, ensuring compliance with safety standards. If you are looking to get high-quality tube bending capabilities, consider the WAFIOS BER-35 machine we have for sale. Contact us for further details. • tube bending machine • Control System: Schleicher XCN 540 CNC • Bending Capacity (Steel/Stainless/Non-ferrous): Diameter 3 to 35 x 3 mm (at R=2xD) • Max Bending Capacity (Tested): 38 x 2.5 mm (at R=2.5xD) • Solid Material Capacity: St.35 up to D=20 mm • Tube Feed Length: 3000 mm • Bending Angle: 1° to 190° • Bending Radius (Max): 260 mm to tube center • Bending Radius (Min): 3 mm to tube center • Bending Speed: 1° to 90°/s (programmable) • Return Speed: 90°/s (constant) • Feed Speed: 1500 mm/s • Slide Stroke: Max 100 mm • Clamping Stroke: Max 100 mm • Mandrel Retraction Force: 30 kN • Counter-holder Force: 25 kN Gjdpfoy Nk A Iox Amyobl • Clamping Force: 45 kN (adjustable) • Operating Voltage: 400 V • Nominal Current: 35 A • Air Requirement: 36 l/min at 6 bar • Additional Equipment: Mandrel unit (servo-driven), Laser scanner safety system (CE), Slide rail (axis controlled), Adapter set for Pulzer tools • Compliance: CE marked • Safety inspection: Safety-technical approval completed

Condition: used, mileage: 20 km, power: 121 kW (164.51 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 6,870 mm, total width: 2,474 mm, total height: 3,260 mm, loading space length: 4,200 mm, loading space width: 2,080 mm, loading space height: 2,340 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 52452 ---- Errors and prior sale excepted! Lightweight Box Body Conversion ALUVAN eCoVan ultra light series lightweight box body * Rear portal with doors SPECIAL EQUIPMENT * 2 batteries * Exterior mirrors, electrically adjustable, heated, and foldable – with integrated indicator lights * Package: Technology Package 15 – Exterior mirrors electrically adjustable, foldable, and heated – Blind Spot Assist incl. Cross Traffic Alert – Ford audio system – Fog lights – Pre-Collision Assist (camera and radar based) – Lane Keeping Assist – Advanced traffic sign recognition system – Front Park Pilot System – Adaptive cruise control – Reversing camera – Navigation system * Headlights: dipped beam with static cornering light – addition to headlight dipped beam * Seats: Seat Package 8A – Driver’s seat, 4-way adjustable (fore/aft, backrest, tilt, height) – Double passenger seat – Height-adjustable headrests – Driver’s seat & outer passenger seat individually and variably heated – Fold-out tray on double passenger seat – Inner driver’s armrest – Driver’s lumbar support – Seat covers: fabric – Heated leather steering wheel * Headlights: Bi-Xenon headlights with static bending light, LED daytime running light – including headlights with static cornering light FURTHER EQUIPMENT * 6-speed gearbox * ABS, EBD, ESP, TCS * Driver’s airbag * Exterior mirrors electrically adjustable and heated * Exterior mirrors, short arm, integrated indicators * Battery: Extended battery life * Floor rubberized up to partition * On-board computer * Overhead storage compartment at front * Headliner in driver’s cab * Roof marker lights * Rev counter * Front electric windows * Electronic parking brake * Ford Easy Fuel * FordPass Connect * Heated windscreen * Glove compartment Godpfx Aey N If Temyobl * Interior lighting with delay switch * Interior mirror * Automatic climate control * 70 l fuel tank * Paint: Solid paint * Headlight range adjustment * Emergency call assistant * Package: Technology Package 11 * Diesel particulate filter * Radio: 12 Multifunction Display & Ford SYNC 4 * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Windscreen wipers with rain sensor * Power steering * Seat belts * Start-stop system * Front bumper * Recirculation/heater front * Immobilizer * Tinted thermal insulation glazing * Central locking with remote control * Overhead storage compartment at front ...and much more. ---- First-hand. German specification. Errors and prior sale excepted. 2-year factory warranty from initial registration (extendable on request). We are happy to accept your vehicle in part exchange. Financing/leasing also possible with no down payment! Do you have questions? We are happy to advise you! As deviations of the vehicle from the above description cannot be ruled out despite existing controls, we point out that the vehicle description merely serves for general identification of the vehicle and does not constitute a warranty in the legal sense of purchase law. Only the agreements in the order confirmation or in the sales contract are decisive. The exact scope of equipment will be provided by our sales staff. Feel free to contact us for further information.

Condition: used, mileage: 66,152 km, power: 75 kW (101.97 HP), first registration: 11/2017, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1348. H072446 ----EQUIPMENT * Seating configuration – 5. Armrests: Armrest for left seat in cab * Front seat row: Double passenger bench seat on the right, 1st row with headrest, height-adjustable * Electric package I – Exterior mirrors, electrically adjustable and heated – Power windows, electric * Rear wing doors without windows – Mechanical locking/unlocking of the tailgate/wing door with interior release function * Partition walls: high partition wall with fixed window and 8 reinforced lashing eyes for load securing * Lashing eyes for load securing, reinforced (ISO 27956) * Seating configuration – 3. Seat adjustment: Height adjustment for driver's single seat in cab * Air conditioning "Climatic" in cab * Seating configuration – 4. Lumbar supports: Manually adjustable lumbar support for driver’s seat (LH) * ParkPilot (rear parking assist) * Radio "Composition Audio" with TFT display (monochrome) – 2 speakers * Telephone: Mobile phone interface * Central locking system with radio remote control and interior operation * Transmission: 5-speed manual * Airbag for driver and passenger – with passenger airbag deactivation – Seatbelt pretensioners for the outer seats * Exterior mirrors: Left aspherical, right convex * Hill start assist * Third brake light * Green tinted heat-insulating glazing * Rev counter * Seat belts: 3-point automatic seat belts, height-adjustable on outer seats in cab * Electronic stability program incl. ABS, ASR, EDS, hill start assist, brake assist * Suspension: 16" chassis with 16" brake system * Flooring: Rubber floor covering in driver's cab * Storage compartments and boxes – lockable glove compartment * Front headrests, height adjustable * Paint: solid color * Multi-collision brake * Non-smoker version, 12V socket and cup holder in dashboard Godpoy N Ifgofx Amyobl * Upholstery: Fabric, "Austin" design * Particulate filter: Diesel particulate filter incl. SCR and AdBlue tank * Sliding door in passenger/cargo area: sliding door right * Interior paneling: half-height side paneling made of hardboard in cargo area * Power steering with safety steering column, height and reach adjustable * Start-stop system with brake energy recovery * Dust and pollen filter * Daytime running lights – permanently on while driving * Internal step in cab and cargo area * Lashing eyes for load securing * Electronic immobilizer * Registration as “closed van”…and much more. ---- Vehicle is in unprepared/unaltered condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing/leasing possible without down payment! Any questions? We are happy to advise you!

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 210 mm, spindle motor power: 7,500 W, number of axes: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travels: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (double front spindle), max speed 4000 rpm, power 7.5 kW (option 11 kW), high-acceleration spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: High rigidity monoblock design • Cutting performance: • Turning (S45C): depth of cut 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min Gbodpfx Amjy Ndu Doyol • Drilling: Ø22 mm; feed 0.56 mm/rev • Tapping: M16 • Grooving: up to 8 mm • Precision: positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/system: 290 L tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned, high-volume production • Driven tools: Yes, for both spindles • Condition: Good, properly working; regular maintenance since 2008 Additional equipment • Gantry loader with reverse turn unit • Work stocker: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 255 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 11,500 W, total width: 1,800 mm, overall weight: 2,500 kg, product length (max.): 3,535 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This PADOVANI E255/1500 features a spindle motor with a power of 11.5 kW and a total mounted power of approximately 14 kW. The machine has a length of 3535 mm and a width of 1800 mm, with a weight of 2500 kg. If you are looking to get high-quality turning capabilities, consider the PADOVANI E255/1500 machine we have for sale. Contact us for further details. • Z-axis motor: 1.4 kW • X-axis motor: 0.7 kW • Axis lubrication motor: 0.1 kW • Coolant equipment motor: 0.15 kW • Total installed power: ~14 kW Gbjdpfx Ajy Ndp Uomysl Additional equipment • Tool holders included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 300 mm, travel distance Z-axis: 754 mm, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis WEMAS DZ 270 was manufactured in 2002. It features a turning diameter of 300 mm and a turning length of 754 mm. The machine is equipped with a HEIDENHAIN control unit and a 12-station disc turret from DUPLOMATIC, allowing for efficient tool management. If you are looking to get high-quality turning capabilities, consider the WEMAS DZ 270 horizontal turning machine we have for sale. Contact us for further details. • Turning diameter: 300 mm • Turning length: 754 mm • Turret brand: DUPLOMATIC (Italy) • Turret positions: 12-station disc turret • Driven tools: Yes (axial and radial tool holders visible) • Main voltage: 3x 400 V ~ • Frequency: 50 Hz • Total power requirement: 19 kVA • Nominal current: 50 A • Control voltage: 230 V ~ / 24 V = • Lighting: 230 V / 40 W Additional equipment Gbjdpfxey Nc E Ie Amyol • Chip conveyor: Integrated inclined belt type • Tooling included: Assorted Garant tool holders, VDI holders, ER collet chucks Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 3,500 rpm, travel distance X-axis: 580 mm, travel distance Z-axis: 450 mm, spindle motor power: 18,500 W, overall weight: 7,200 kg, number of axes: 2, Horizontal turning machine manufactured in 2006. This Johnford SL60 features a swing over bed of 580 mm and a spindle bore of 76.5 mm. It is equipped with a 12-station tool turret and a high-torque spindle motor capable of speeds up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Johnford SL60 machine we have for sale. Contact us for further details. • Spindle bore: 76.5 mm • Guideways: massive box-ways (for vibration damping) • Tool turret: 12-station Gbjdey Naiqopfx Amyel • Tailstock: none (removed/not mounted) • Operating hours (power-on): 30,713 h • Total parts produced: 234,092 Additional equipment • Schunk Rota 315 / 86 three-jaw power chuck • Chip conveyor • Tool holder package • Full documentation (Johnford & Fanuc) • Parameter backup Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Gbodpfx Aey I Uu Esmyjl Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, mileage: 58,440 km, power: 125 kW (169.95 HP), first registration: 06/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1165. PD23390 ----EQUIPMENT * Technology Package 10 – Heated windscreen, windscreen wipers with rain sensor – Front and rear parking pilot system, active emergency brake assistant (camera based) – Lane keeping assist with driver drowsiness warning and high beam assistant, including lane keeping assistant – Headlight assistant with day/night sensor – Cruise control – Reversing camera with rear path display in multifunction display – LED downlights – Fog lights * Radio: Ford Audio System with 4" multifunction display DAB/DAB+ – Connected radio (FM/AM) – Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) – FordPass Connect – 4" TFT multifunction display (10.16 cm screen diagonal) – 4 speakers, antenna – integrated control panel and steering wheel audio remote control – Bluetooth, USB port and hands-free system – Emergency call assistant * Transmission: 6-speed manual gearbox * Anti-lock braking system with electronic brakeforce distribution (EBD), including – Electronic stability program (ESP) with traction control (TCS) – Hill start assist – Crosswind assistant – Safety brake assist – Rollover protection – Emergency brake support including emergency brake light * Driver's airbag * Exterior mirrors, electrically adjustable and heated - with integrated indicator lights * Battery: battery runtime, runtime programmable to 10 minutes * On-board computer with fuel consumption and mileage display (e.g. remaining range) as well as outside temperature and Ford ECOMode * High roof * Double rear doors with 256° opening angle (without window), no rear window, with hold magnets * Rev counter * Third brake light * Electric front windows with quick down/up function for driver’s side * Ford Easy Fuel – Comfort fuel cap and misfueling prevention system * High performance alternator * Headlights: Halogen dipped beam with daytime running lights * Lockable glove compartment * Interior lighting with delay and front reading lamps * Front air conditioning incl. dust and pollen filter * 70 l fuel tank * Paint: solid color paint * Cargo area lighting * Steering wheel: Artificial leather steering wheel * Steering column adjustable for height and reach * MyKey key system – individually programmable second key * Fog lights Godpsxngwvsfx Amysbl * Emergency call assistant * Particle filter: Diesel particulate filter * Sliding door entry light, automatic when door opens * Sliding door: right side * Rear mudflaps * Side protection strips * Power steering * Seatbelts – Front seatbelt tensioners and force limiters * Seats: Seat Package 13 – Driver’s seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) – Double passenger seat with storage compartment under separately folding seat cushions – Height adjustable headrests – Integrated tray in double passenger seat (foldable) – Driver’s inboard armrest – Manual lumbar support (driver’s seat) – Seat upholstery: fabric * Start-stop system * Partition (plastic) at the B-pillar height * Rear bumper with integrated step * Recirculation control * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control * Overhead storage compartment in front ... and much more. ----The vehicle is not reconditioned! Nationwide delivery available at extra cost. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing available.

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,474 mm, total height: 2,765 mm, loading space length: 4,073 mm, loading space width: 1,784 mm, loading space height: 2,025 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: Subject to errors and prior sale! SPECIAL EQUIPMENT * Airbag (passenger side) * Seat Package 15: Driver's seat adjustable in 4 ways – Double passenger seat with storage compartment under individually folding seat cushions – Height-adjustable headrests – Integrated fold-out tray in the double passenger seat – Seat heating for driver and passenger – Inner armrest for driver – Manual lumbar support (driver's seat) – Seat upholstery: fabric * Technology Package 13: Heated windscreen – Windscreen wipers with rain sensor – Park Pilot system front and rear, additionally with side sensors – Active emergency brake assist (radar-based) – Lane keeping assist with driver fatigue warning and high beam assist, additionally with lane keeping and lane change assist – Headlight assistant with day/night sensor – Blind spot assistant – Adaptive cruise control – Reversing camera – LED downlight – Fog lights – Exterior mirrors electrically adjustable, foldable, and heated – Automatic climate control – Ford audio system with 12-inch multifunction display and Ford SYNC4 FURTHER EQUIPMENT * 1 battery * Airbag driver's side * Anti-lock braking system with electronic brake-force distribution (EBD) including ESP with traction control – Hill start assist – Crosswind assist – Emergency brake assist – Rollover protection – Emergency brake support with emergency brake light * Exterior mirrors electrically adjustable and heated with integrated indicators * Battery run-time, programmable battery run-time * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Double rear wing doors with 256° opening angle (without window), no rear windows, with retaining magnets * Rev counter * Front electric windows – with quick down/up function for driver’s side * Ford Easy Fuel * High-performance alternator * Lockable glove compartment * Interior lighting with delay function and front reading lamps * Fuel tank 70 l * Cargo area lighting * Steering wheel: artificial leather steering wheel * Steering column adjustable for height and reach * MyKey key system – individually programmable second key * Emergency call assist * Package: Technology Package 9 – Heated windscreen – Windscreen wipers with rain sensor – Park Pilot system front and rear – Active emergency brake assist (camera-based) – Lane keeping assist with driver fatigue warning and high beam assist, additionally with lane keeping assist – Headlight assistant with day/night sensor – Cruise control – Fog lights – Ford audio system * Particle filter: diesel particulate filter * Radio: Ford audio system with radio and DAB+ – FM/AM radio – Digital radio reception DAB/DAB+ – MyFord Dock – FordPass Connect – Speakers, antenna – Audio remote control on steering wheel – Bluetooth interface – USB port – Hands-free system * Wheels: hub caps * Wheels: tire repair kit * Wheels: steel rims 6.5J x 16 * Headlights: halogen low beam with daytime running lights * Sliding door entry lighting automatically activated with door opening * Sliding door, right Gbsdpjyg Tu Hefx Amyjl * Rear mud flaps * Side protection strips * Power steering * Seat belts – Front seatbelt pre-tensioners and force limiters * Start-stop system * Rear bumper with integrated step * Partition (plastic) at B-pillar height * Air recirculation * Lashing eyes * Immobiliser * Heat-insulating glazing, lightly tinted * Central l...

Condition: used, mileage: 148,267 km, power: 77 kW (104.69 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,140 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,767 mm, total width: 2,200 mm, total height: 2,900 mm, loading space length: 3,205 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1155. JS47555 ----EQUIPMENT - Speed limiter - 6-speed gearbox - Electronic ABS with EBD - Driver airbag - Manually adjustable exterior mirrors (2) - On-board computer - Flat roof - Overhead storage compartment in front roof area - Headliner in driver's cab - Rev counter - ESP with TSC - Electric front windows - Ford Easy Fuel system - Glove compartment with lid - Interior lighting with delayed switch-off - Solid paint finish - Adjustable steering column - Diesel particulate filter - Dropside body: Standard (wide) - Radio pre-installation - Dipped beam headlights - Power steering - Seat belts - Seat Package 4 - Daytime running lights Gbodpfxsx Ndmge Amyol - Recirculation control - Immobilizer - Heat-insulating, lightly tinted glazing - Central locking with remote control... and much more. ----The vehicle is unsanitized / not cleaned or prepped! Nationwide delivery available for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing / leasing available with or without down payment! Do you have any questions? We are happy to advise!

Condition: used, mileage: 27,877 km, power: 100 kW (135.96 HP), first registration: 10/2024, fuel type: diesel, overall weight: 3,225 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,978 mm, loading space length: 3,002 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0945. RR24958 ----EQUIPMENT * Airbag (passenger side) * Towbar preparation kit – Electrical preparation set for towbar – wiring harness, 13-pin socket and trailer module for retrofitting a towbar * 70-litre fuel tank * LED headlights – LED high beam – LED low beam – LED daytime running lights including integrated front LED indicators – static cornering light – automatic high beam assist * Cargo area floor: hardwood * Cargo area protection package "Express Line" – Multifunction cargo floor made of hardwood with anti-slip coating incl. 3 integrated airline rails and lashing eyes – Airline rails on right and left side walls, at medium and high position, incl. lashing eyes – Full-height interior side wall cladding – additional mounting points for racking systems or further accessories * Technology Package 5 – Exterior mirrors with indicators, electrically adjustable, heated and foldable – Audio system, 13 – Multifunction display, Ford SYNC 4 with navigation – Blind Spot Assist incl. Cross Traffic Alert, reverse emergency brake assist – Pre-Collision Assist, camera and radar based – Driver drowsiness alert – Wrong-way warning – Lane keep and lane change assist – Traffic sign recognition – Front/rear parking sensors – Adaptive cruise control – Intelligent speed limiter – Reversing camera – Sensico leather-look steering wheel – Safety and ESP * Socket: 12-volt connection in the cargo area (D-pillar) * 2-stage unlocking for passenger compartment and load compartment (rear doors or rear wing door) prevents locking of open doors * Transmission: 6-speed manual * Anti-lock braking system with electronic brakeforce distribution (EBD) * Driver's airbag * Exterior mirrors electrically adjustable and heated * Exterior mirror housings made of black-grey plastic * Battery: H7 AGM single battery * On-board computer with consumption and mileage data (e.g. range) as well as outside temperature display * Roof: flat * Roof console Gsdpfx Ajy Nvctomyebl * Rear double-wing doors with 180° opening angle (without windows) * Rev counter * Third brake light * Electronic safety and stability program (ESP) – Hill start assist – Emergency Brake Assist (EBA) – Traction control (TCS) * Front power windows – with quickdown/-up function for driver’s side * Electronic parking brake * FordPass Connect – including live traffic data and 5G WiFi hotspot – Information on current vehicle status or location and remote control of selected vehicle functions via the FordPass app – Current real-time traffic information (in conjunction with navigation system) – WiFi hotspot (up to 5G/LTE, for up to 10 mobile devices) – For more information on FordPass Connect please refer to * Heated windscreen * Grab handles, driver and passenger sides * Glove compartment with lockable lid * Front interior lighting with delayed shut-off * Automatic climate control in front – with recirculation heater – with R-1234yf refrigerant * Front headrests (3) * Paint: solid color * Cargo area lighting (LED) * Steering wheel: plastic steering wheel * Small centre console * Emergency call assistant (eCall system) for automatic or manual emergency call in case of an accident * Diesel particulate filter * Radio accessories: 4 speakers * Tyre pressure monitoring system (TPMS) * Windscreen wipers with rain sensor